TOP 5 CHEAP MODS FOR YOUR CAMARO SS

You know, I think a lot of us assume that we need to spend a fortune on modifications for our Camaros and cars, but the reality is that some of these smallest modifications, some of the

cheap

est modifications, are the most fun to install, the easiest to install and really friendly. to make the car

your

s, so today we'll cover the top five modifications you can make for under $50 for

your

Camaro. Now, when you modify a car for less than $50, you are very unlikely to do it. Get a lot of horsepower, if any, these are really going to be some cosmetic modifications that you can add to the car that really personalize the car and make it yours, so let's look in the passenger seat, let me show you exactly what we make.

We're going to do today, we're going to eliminate each of the facilities, okay guys, before we move on to the video. I'm actually announcing a quick giveaway here, we're giving away this Lego set of speed champions, these are a flash to build, if you haven't built any yet the details will be in the description below on how to enter now, it's You may have noticed in the intro to this video, but we actually installed it, we put a carbon fiber cover on our Camaro key and I think again it was a thousand times better, there's about thirty dollars on Amazon, so in Instead of your normal key you have some carbon fiber spruce top, it looks seamless, it has no edges, it's really simple and easy and it's just one of those things that you use every day. day you see it every day very easy easy modification no need to go into more details so if you have been watching this channel for a while you will know that we love carbon fiber and this is actually one of the most expensive modifications of Our list costs around 45 dollars.

It is actually a carbon fiber bezel edge. It's something you see every day. It's something you interact with every day. 50 dollars. Great value. Super easy to install. Look at the back, there is only 3m tape around it. Let's go ahead and take it off real quick and put it on our bezel. I mean, when it comes to installations, it doesn't get any easier than this, all you have to do is pull back all the tape and it will seat properly. where it needs to go I think this looks great on the car as it is now I think the silver color is too much of the interior, so for 45 bucks I think it's a really easy fix, the fit is pretty good.

I think it looks absolutely great in this interior, so that's number 200, let's move on to number three, so there's no doubt about it. The interior is being hooked up today, next thing we'll do is add some paddle shifters as well. I know when I first ordered these online I thought they were going to be plastic, but I was actually very surprised because the quality of these is absolutely phenomenal, they are actually some type of aluminum. I think it will add a little more contrast to the direction. wheel itself and a little more styling on the front of the car it's directly in your line of sight the only thing I'm a little worried about is if when I turn my hands they're going to hit it, we've got to move up a bit of a ride after this and see exactly how they feel.

I agree with everyone that heel-toe-down shifting is much more rewarding than the rev-matching feature, but on the track I really like the option of being able to activate that and not have to do it. To worry about that when I'm shifting from fourth to third to second gear, let me know if you use it on the track or stick with the heel and toe. I definitely need a little more practice, but again, that's why we have this stick with a manual until the end of time, okay guys, to win this, the lake will be in the description below.

I would really appreciate a like and comment, it really goes a long way in growing this channel so this is the only way I would like to give back is with these little gifts. I felt like it was a perfect little gift for this video. It costs about $15 to $20, so it's not tremendously expensive, but it's a blast to build a nice little item. to go with your Camaro at home, so when I first bought the Camaro, one of the first modifications that we made to this car that I didn't really video much because it was so easy to install was removing our orange color.

Side Markers These things are absolutely atrocious, they are ugly as hell and we had to get rid of them immediately. We've gone with some darkened diode dynamics side markers and they work

cheap

. They cost me about $150 for everything. First of all, these are garbage that are thrown away immediately. The second option is a $30.00 option that you can pick up on Amazon. If you're interested in seeing the real differences between the Diode Dynamic Side Marker and the $30.00 Amazon LED Side Marker, let's go ahead and swap everything out. The side markers are extremely easy, it's 10 bolts and then it comes right out, you just disconnect the harness right at the back and you're ready to go from here, all you have to do is pop two tabs on the side marker, basically all. you have to do to pinch it and it pulls out so obviously this is what the original side marker looks like so you can see on the Amazon part it's definitely a little bit cheaper than the dynamic IO so you can see well the real quality. of the case itself, but I think for 30 bucks you're getting a really good deal here, this slide looks like it has a little positive negative terminal on it, we're just going to slide it in, we're going to slide it right into the case and hopefully when turn the car on this will actually work so I think for $30 you are getting a very good deal and you are definitely getting your money's worth when it comes to these LED side markers now as far as the quality versus the diode. dynamics I think the dynamics of the diodes look much better if you look at them side by side, the clear side marker looks much cleaner, the LED strip is also much better at night so I think this is yes you're going to stretch your budget and dynamic diode it's definitely worth it, but you're trying to save every penny, thirty dollars on clear side markers compared to the original OEM Orange, you really can't go wrong, so thirty dollars, I think it's a good business, so when it comes to modifications, this is as cheap as possible.

Let's install some caps for our vocal roots. They have little SS logos. It costs five dollars, so why don't we include this at the end of the article? video, all you have to do is throw it on the steering wheel and it will connect and you won't even have to turn them on the wheels. Really cool, done, like this, your valve covers are back on five dollars, easy modification, cheap modification, other. on our list for today I don't know about you, but to me this seems pretty level. Getting them in the right place is going to be difficult, so what I did was make a small template from the other side where the SS are. badges I'm basically lining this up until it looks roughly right.

I hope this doesn't turn out horrible, but this is the best way I can think of to do it if you guys have a better way please. Leave it in the comments below and for around 25 bucks you now have it as a 1le logo on the back of your car. They are going to black out our GM emblem on the back of our car and you guys have pointed it out in every video, so here we are finally fixing it, finding a solution to that problem, a deep black vinyl, this is only about eight dollars, It is very easy to install, just peel off the bar and that's it, we will finally get rid of that ugly thing.

The Chevy brass on the back of the car really clashes with absolutely everything we've done so far, are they enough to take the bar off or are we just going to trim the edges here and you guys are good to go so this is It's going to be really easy, it will take about five to ten minutes and all you have to have is an exact knife, if this works, if not we will have to shell out the money and buy a crossed out GM plate for now. I'm pretty sure this solution will work pretty well, it's just that as we overlooked again, you want to tighten the vinyl as much as possible and then what we're going to do is release the tension around the sides of the emblems here now, no I know how well this will come out on camera, but essentially what we're doing now that we've got everything out of the way, we're basically going to place our sword inside the indentation of the Chevy emblem. and basically trace this, so take your time, be slow, you don't want to mess this up, but at least you have two tries in case we do it, let's go ahead and cut everything up and then we'll go ahead and peel. all off I don't know what you guys think, but from here this looks fantastic, really easy to do at home and much better than the goal until you were absolutely right to suggest this in all the other videos we made.

I think we kept it. about 20 bucks doing this at home too, as long as you have an exact knife again this won't be a problem at all and we're ready to make it look like everything is perfectly set, you don't need a heat gun or anything just take your time, trace everything and it will come off, alright guys, and for those of you who have been telling me to put an SS badge on the car, we finally did it, this was a little five bucks. 3D printed badge that we also picked up from Amazon and I think it fits perfectly, I hope it doesn't fall off because the tape doesn't feel as sticky, but anyway, I hope you enjoyed this video.

I really enjoyed doing this, try changing the Content up a bit with something new if you're planning on entering that giveaway, just make sure to follow the link in the instructions below. I'm sure you'll have a great time building that, so until next time, see you. in the next video