DiaLux evo - How to use LED strip

Good morning everyone, this is nailed again and it's hot outside now hey and bye. I'll answer another question from our friend and he asks about Howie. Sorry, where is how do you put the LED

strip

s? Strips. These

strip

s are perhaps in the room in the dialogue. Steve. sir s Rd John von d Novick I will answer his question and how he will place his LED strips in his room using the evil dialogue software. Let's use this office project as a sample for this LED strip creation. You can see I have this here. some small executive office and I am planning to put some LED strips, maybe on this one I will create a cove light here, maybe here and maybe also on the side and maybe on the wall, I will create a dramatic LED strip effect on Wall. so sir okay whoever you are I hope you're excited and let's go okay let's create a cove here on the roof first select the roof and then we have an offset of maybe point 15 and then we have a roof thickness of 0.1 and you will now have a nice cove effect on the ceiling.

Okay, when you're making the roof, make sure you've created a lot of points because now you can see that the cornice isn't that pretty, but anyway this is just for show. Okay, now I have the cove ceiling here where we will place our LED strips. Well, there you have it. Ok, so your Cove is now ready for your LED strip. Vieau G Novick, if you don't have or don't know any brand where you can get the LED strip, it is the file I would like to suggest, I am not promoting, I am just suggesting and I would like you to do so.

I would like to suggest going to the proven Dalek website and then going to the LED engine and selecting depth. Let's go back and select something else, maybe this one, yeah, okay, let's go to the Daleks engine and select maybe, for example, let's say this one and then go and yeah, here you can download the is files for these LED strips. There are two ways to do it, or you do it manually, like you see and select this LED strip. Now you do it manually, like one by one, like this. or you're going to do it like linear and then you're going to adjust it like this and then you're going to adjust it or you're going to create a reference line, a cove reference line and then you're going to follow that curved reference line, okay, still, let's make it imaginary and edit. later in da and let's say let's do maybe, for example, 15, then follow the form one nine ninety degrees and then apply yes, so go back to the building and see if it fits in the cove, okay, now this is 160 170.

I did it. manually because the reference line doesn't work, this one is okay it's 98 and let's double check that it's executive and the television and then let's select these lights so it's right. I think it's not right, look it's not right, so we have to move. up, then right click and move here, this is the right one, so I think it's okay, now you have the LED strip on the curve, okay, so let's finish with the comb and let's go for example to other places like , For example. In this, this is very easy because it's a straight line on the next drop ceiling, so go ahead and select it.

You should be on the ceiling board and then let's do another offset of 0.1 so that the thickness of the ceiling is 0.1 and then let's see, now okay, this is what the height of point 5 is, let's do it as well to 0.5, okay, so what I can do now is, of course, it's very easy to go back to the executive. The roof is not available here. I mean, the code is not shown, so let's go back to the building. and build it and then make it here so we select the LED strip again and then use the draw line layout here; here let's say maybe 15 again yeah 15 fits perfectly great and then of course you have to make sure it's in the 180 degree orientation because it should be pointing up okay let's move it up because it's not in the location correct, so let's double check, yes, it's here and yes, now that we have the joint flights, let's do a calculation first, it's still calculating.

Here stop eating technician Mr. The good thing is that you give me something whenever, but nothing heavy, not quite, yes, be happy, problem because of you, okay, amazing, okay? I think The Cove's lighting is there now and it's fading. You can see it's wow, this is working correctly, so now sir. Vieau G Novick yes, this is your Cove lighting and you know how to use it, how to place your LED strip now here, so that's it. I'll do it, mom, I'll wait. I need to show you something else, how to use your LED strip, you can also place your LED strip, for example, you want this floating paint painting like there is a light behind it or you want to put something like light behind this cabinet or maybe something like here on the wall, okay, let's do it first behind the painting, let's do experiments.

Well, I love to experiment. Well, first we'll make this painting a floating effect painting and another one here under the cabinet, so let's go to the top view and draw a line again. Let's not push the drawing line layout here up to here, but I think it's necessary. select a lower lumen output because this is too much, so let's say 15 again, I love it, 15 no, do 30 now, then okay, 10 and go to the elevation view and make sure it's on the cabinet, move down and then place it here, okay I think. you need to add more depth here and then okay, so there will be lights on your cabinets and for the paint, let's go for the top filled to the top again and draw an arrangement of lines and then you add three, okay, go to the sell side.

View or elevation view What happened? Why are you there? Then move down and make sure the light is where I will be facing the light. First, we need to move the paint a little further away from the wall. Okay, and then this light will be in front of somewhere. rather, yeah, let's do it 180 too, so 180 degrees. I'm not sure the effect of this and then copy and then go to the top view and paste because you can't put it in the elevation view and then move it down and then make before it is 180 now make it one let it be 0 for all, yes, and then for the side, you need to create it in the side view, let's see if it's possible, draw a line and maybe let's put two possible probabilities, okay and then let's go. to the top view to check where it is located, yes it is not correctly so rotate it and then yes and then just copy it and then paste it and then move it to the other side and then of course rotate it okay let's check and if.

Alright, now we have LD strips on the cabinet, it will be like a cabinet light and then there will be a backlight on the painting. I don't like this painting, who drew it? I believe it is me. Okay, let's apply something else to the paint. Sir. P okay, so I'll have paint and the other technique I'm telling you is, for example, if you want to put a shelf here, let's select this cut, rectangular cut, okay and let's limit the depth to 2.3 maybe and another one here. limit again to 2.3 and maybe I want a line of light here, sure this is the new trend in lighting, okay, let's limit it to two point three or point two, so I have three holes now it's one, two and three and it's this light.

It's going to be like, I'm going to put an LED here and a diffuse LED here, but first let's put a cup on the cabinet, so let's go to the plan view and select the LED on a line again and let's go here, maybe you need, okay, let's draw. a line layout outside first because it's not detecting the wall so okay now like this and move it ah okay look it's not detecting and then let's bring it down and make sure it's in the right position okay and also in the other box. let's just copy copy paste and then place it somewhere here with a proper elevation it should be here okay now we have lights you can do it on the sides or from below or you can do it from the table like what I did and then like maybe you can cover it with something else so you can't see the LED strip in that, okay, and of course, here at the top, in the little hole that I created, so we'll create another one here, let's go. and go to the plan as elevation view because I found out that it is possible to put it in the elevation view and then it makes an 8, maybe, for example, 7, come on 7 okay, go to the plan view and check the covered location of ice. correctly and then move it in here and rotate it like this, uh, this is not a correct rotation, this is the correct rotation, rotate there, yeah, and then let's go over this box with maybe a diffuse glass because it will create clarity for the Executive Officer, so let's go to the object and open the box, Omar, so now I have this one and then of course I'm going to make it a little bit transparent so I'm going to select the material for the glass and then I'm going to put a little bit of texture on it. one and then go to the other side make sure the other side is not transparent because it will just sweat so let's make it diffuse so let's go to the other side of this box and let's do it oh this is it.

Now it's not part of his request, sir, could Nick? No, there is no budget, but I am just giving an impression, oh my god, let's take ethereal as a sample and then apply it on the back. Okay, why did I do that? This way it won't diffuse the light. it's going to become just a diffuse one, okay, you're going to get this one later, so let's scale it up a little bit and let's move it now and place it inside the box, okay, so let's see what it's going to look like, so I've got, oh no, this is it.

It's not good because it's facing there, I think the LED will light up anyway, let's experiment, okay, let's run it and see you later, it's getting like a big one, we have a third of those, but let's stir you up. Thanks, Grammy, okay, there you go. That's cool, look at that, have you seen the box, the floating cabinet, mr. Bean's paint isn't that good, so I think we gave them a good introduction here. I have a cove light here and here, I just need to fix this one on this one. I also have a cove light here, you can put some on display and some might be pretty. jewelry or washing or anything, most executives have these collections and look at this amazing light strip, here we go, it's like a floating booth, it's actually good for counter areas or display areas in retail stores, but I think that this we were not able to have a good floating effect mr. bin, I know why because we cross the lights on both sides and it's creating shadow on the other side anyway, so there you go, I think this is awesome and mr.

Novik I hope you learned something, so let's summarize, you can place your LED on the top using single or circular arrangement or line arrangement or you can use the reference line, okay, so you can also replace some fixtures or LED strips. LED in the elevation view like the one I made here so you can run it like this either in plan view or elevation view you can place your LED yeah so I hope you enjoy it and I hope you learned something and yeah bye .