This customer’s attitude changed the price…

tilting it down and sure enough, it stayed, it bled down a little bit, but it's okay, so now we're going to run the bed all the way back, look at the front of the truck to see if it does a wheelie, no, so I do it. will. go ahead, fold the bed down, nail that part of the house into the ground and then we take off some chains, we take off the front chain and then rule number one is don't walk around the back of the back now that it's halfway up path. there, so I go down the front of the track, they removed the chains on the other side, which I'm not going to show you because they're on the other side where you can't see anyway, so I take the remote and tilt the bed backwards.

The plan is to let the winch out and let the rear end slide. The rear end keeps the hoe close to the ground so you can get it back in if necessary if something goes crazy and it starts to come free with just enough tilt for it to slide, we want

this

thing to be as far back on the bed as possible before We try to put it on the floor because it doesn't move on itself, so tilt it back and turn it a little more. Look at the front of the truck to see if it is going to wheelie.

I think it could be like that. So I keep looking, keeping that in my arm right on the ground, right where I can see the front of the truck is starting to want to float there, it always does like a little wheelie here and takes

this

thing right to the back of the bed. and then We can put this thing on the ground once it comes up here, pull back on the arm lever and let it float while I lower it like this a little faster than I thought. Now the hose on the floor and back.

The end of this thing is going nowhere. I released the winch a little. I slid the bed forward a little. I released the lynch. a bit. I slid the bed forward a little. I'm just walking to get out from under her once we get there. it's far enough forward at a pretty steep angle, we'll go down there, nice look, make sure everything's okay and that's where we're going to drop this thing and get out from under it, but first I have to find some Chocolate Wheel blocks because of all modes I don't want to roll I found some blocks here we go now we're safe disconnect the Wench lines from the front of the machine and then use the winch to get the chains out from under the bucket now get on the The truck started it up and made this a non-starter my problem and now for the most important part try that.