Sidewinder V3R setup and tuning

Hello everyone, this is my V3R, I call it v3r because it is the same geometry as version three that many people liked, except that I have remastered it and reviewed it. Small screw here is fine and this is one of the most important parts of the

tuning

of this machine that is often overlooked and misunderstood and, in most cases, the bar will be more or less when it is pushed down, it will be parallel to the frame that can be seen here that this impact screw is perfect and it is the same in everything there is a frame in the frame.

This line is another line on the camera, as well as down, beyond the bearing and that so that it can see that it is combined with which it rides it gently, gently touch the spring and make sure that it is in that area from there, I have a click dial and that it cannot go too far or very little in this dial, and so it is the point of the dial decade, which is the 10th. Here the star will be the central coup and will have the number 9, which is the longest of them, the star configuration will be the ideal configuration.

Some of them, the ideal configuration, may be in a number three or number six or seven, but with the average stroke configuration, it is very versatile, I can use a type five all the way to a 14 -year -old round, so this number is more than a nine configuration, as a little more volts, where you want to make a shading and a shadow And it is a little suddenly and it is a little suddenly and it is a little suddenly and it is a little suddenly and it is a small blow and it is a little suddenly and it is a small blow and what needs a small blow and it is a little suddenly and it is a little suddenly and it is a little suddenly and it is a bit of Shance of a Saturday blow.

At a lower volt for the mechanism to keep up with the impact screw, as always, there is a side block screw, it is always quite comfortable, but if it still does not get rid and still having to restore its impact screw, because that screw is loose. Talk about this in the video, it should never be a problem in something you should take, I just have to have a little secret magic, but it is also loaded with spring, which is good with this is that with your disposable you will turn it into a bit from time to time.

With a normal tube as I squeeze and it is like a small pass of towing from where it touches and is very solid and there it does not go anywhere, well, the most important thing is that its machine does not sca further. For the armor bar or a bit more perpendicular, the idea is that the needle be double Great that is bigger that goes to the needle. Needles that you want to change your nipple with each machine with each tattoo you do, you can here in the middle of a tattoo if you continue using it for hours at the end of volts and the long line of suddenly, the changes of the field suddenly and start turning like madness, it could be that you have seen through the rubber gum bands. 28 But they are very difficult to discover that you have to call the rubber companies of the rubber bands.

There is a calm of the postal band and they do not even have them on their website, I only call them and in the knee some sends me, but two twelve numbers also work well, so what you put them and then the turns around and the good also with this figure, eight style, if you need more tensions, you can only say that my friend taught me. Having the perfect tension of your rubber band if it is too tight, you can always release it and do it, but basically when I double the needle, what I am trying to do is get enough tension so that the needle tension causes the needle bar to go straight instead of the curve, so if your needle mud is directly to start and put tension in which the needle bar is always doubled and you will see the needle of the needle.

Because I want the machine to hit more positive more positive, we will be a little more passive, I never execute it in that way one of the things compared to the V6 is MV 5S that has a different engine, this engine has a little more than a range in which I say that from 5 volts to 7 volts it is a good range, it can change it, it may achieve that it has a longer blow. A little more just to really hit the bottom of the race, but I usually like it for nine coatings and you know that I would like to have more than six volts like a 6.3 and I like this speed for my biggest needle, maybe 6.5 very rarely I want to go more than that just because I discover that you start getting too fast and that you get only more blood that you do, it needs me your restart of impact screw Of five volts, he still listens to that it sounds good if he still has that clear sound and, in some cases, as with this in the number one configuration to five volts, he still has an impact if he does not do it if he needs its impact on one in one either to his machine, and perhaps his bar can no longer be parallel and begins to do this where he wants Slit and does not do so.

Like stuttering, it is because it is sliding when it is hitting at the bottom of the race and you just have to have a little more interaction with the camera, so I'm going to turn around, so I am in that range again in lower volts, you will be at the upper end in that notch with this line and if you can start a longer blow, but you can start to wear too much. Five volts and if you are spreading people, so then your nine volts, I mean that you are really going to see how much that blow is really traveling and it is as if you would like to tattoo some rhinocerosis.

The airlines are corrosive, you can use barbicide, which is not corrosive sterillating if you feel you need to erase everything and get coootes from your machine. I only preferred that people only treat their machines with respect and do not pollute them crossing things and simply shade it as if you do not want to touch your client and transfer in which your machine goes back. I'm going to run that spring back, so, use common sense thanks for looking