PLASTIC CART TO AN EXPENSIVE LOOKING FRENCH DRESSER | BAROQUE DRESSER FROM PLASTIC CART

I breathe the air the light around me if we stick together we will go far and let's go Hi guys, youtube essentials here for today's video, I will use a

plastic

storage

cart

and I will use this to make a French style chest of drawers Here are some photos of what the

dresser

I want to make would look like. Now I went to the thrift store to look for something similar to work on instead of making a new one, but I couldn't find anyone. I decided to make mine using two

plastic

storage

cart

s. I will first remove all the drawers and then attach all the frames.

If you're new to my channel, it's great to have you here now, don't forget. Click the subscribe button and the notification bell so you don't miss any of my latest videos. I'll put a wood port on the bottom to make it easier for me to attach the legs to this and the legs I have. I'm going to use what I bought on Amazon and I'll leave a link in the description box below. I will make the wide curved shapes on the sides with plastic sheets and I have a large roll of sheets. only twenty-one dollars and that's a lot, so I cut it to size and then put them together like this.

This isn't strong, so I'm going to use cardboard to make the shape I want inside and this is the shape I cut out. that will fit perfectly inside, so I'm going to cut out several shapes and put them together. This cutter made it very easy for me to cut the shapes and the link for this will be in the description box below, but you should know that the cutter vibrates, that's the only thing I have a problem with, but then it does the job. These are the shapes I cut out. Now I'm going to glue them to a flat board to reinforce it and then. inserting it into the space, I'm going to fill this space here that I left open and I'm going to fill this space with tight foam that I bought from Home Depot.

They also sell this at other hardware stores. Now I'm going to shake this vigorously for about 30 seconds and then spray the foam inside the openings. Now I'm not going to go all the way because this swells over time, so I'll start somewhere here in the middle and then hopefully it swells. going down I used one can for this and then made another so I used two cans total. The next thing I'm going to do is cover the back with the board now, as you can see the foam is starting to swell and I'm afraid it's going to pop open.

I was expecting it to swell down, but let's see how it goes. It is hard as a rock and also weighs little. This is the wood I am going to use in the drawers. I cut it to size. and I cut three because I am going to join two drawers into one piece of wood, all I did was remove the drawers, align them correctly on the wood and join them to the wood because the drawers are not flat on the front. I'm going to put something on the bottom to keep them balanced so far. Alright, this is where we are now.

The openings here will be covered again with sheets just to cover the gaps. I removed the drawers and took out the body. and we print it with silver spray meanwhile the drawers will be covered with marble contact paper. I bought this online and I love the design of it and the link for this will be in the description box below. using this ornament to decorate what i just made and i spray painted it silver and attached it to the sides with a hot glue gun and with brads so im going to use this also i spray painted it silver and attached it is at the bottom , I will use these to open the drawers and the link for this will be in the description box under the screw shown at the top.

It makes me uncomfortable because it's too obvious, but let's see. how's it going i got the shape i want now for the top i'm going to use five bottom pans that i used for another project now those of you who have seen this video will remember that i used just the bottom part and left the top part so the top is what I'm going to use now to decorate the top of my

dresser

. I cover the front and sides so it flows with the overall design. This is another decorative piece that I am going to use.

Spray painting silver and attaching it on top, I will be adding more and the list of all of these will be in the description box below. Now, this one I got from Lowe's has already been spray painted gold for another project, but then I had axes and I cut them into little pieces, scraped them silver, and attached them to the dresser. Now everyone might say this is too much, but remember this is a French

baroque

dresser that has to come with lots of embellishments. I'm going to add this one too and spray paint it silver and clip it on the sides.

I carefully painted the wooden parts of the drawer that are still visible with white acrylic paint. This was a very interesting project because I now have drawers that have been compartmentalized due to the plastic containers I used. I used white and silver for this, but then you can choose the color that suits you best. Who would have thought that a plastic storage cart can be covered and looked at? I really hope you all enjoyed this idea and learned a thing or two from it. Don't forget to like this video and share it with your friends and family.

Thank you all very much for watching it. Home Decor DIY Videos linked in the description box below to watch and don't forget to click the subscribe button.