Mystery Engine Shocks Us!

Oh, we have about 16 or 17 batteries, yeah, which could be a problem. Hey, what's going on guys today? I have a little Civic. I adjusted a little here, but first these guys have been working to try to make this happen. The emissions I removed EGR were all converted to O2 obd one and they had some things that were like they were hacked or just not right or whatever so the guys have been playing with that so I'll go ahead and check. the code real quick and here I am, it's messing things up a little bit, it's been crazy since I got back, we've been going and going and going, where's this cheat side and here's the two wire one?

We could jump those wires. together, we'll count Nash's blinks if all else fails, but hey, let's see what this stupid thing says. Shane just put in a nice dock. You see yourself in him again. I heard this cheesy little act, Ron, my snap in one decided to get out of there. guess five right then P 1607 p 0 1 3 2 p 0 1 1 3 p 1259 p 0 4 50 that's it oh it's full of code and they'll write it in other quick ways I mean I just use the video camera , but I just take pictures quickly just go in and double check them all and it would be the actual code because they showed up right away a change change the ECU so you know it was new, you know, we'll hit delete just because please delete everything okay. again come back again okay, make it clear okay, let's go through these codes real quick and then we'll move on to the brothers, little tuna, be cool, they've worked really hard, look at that.

I have it coming. Ready for you guys soon, okay, let's hand out these codes, dummy, hey dummy, it's the new camera installed, hey sir, this little 1.5 is going to make a big Jam now that you've got that new big competition camp or something So, get it. offspring retainers, even we are not a valve control, he came off the dyno and I was like he has order, it's art, it's sick, so I went through that Prelude and I just wrote the codes that it has and those are as follows with the key, you know, I don't even have to start getting them, that means their stuff that's offline isn't even there, so that's okay, we'll have to go through that too and then move on.

It's cool, yeah, what are you doing? It came out in your new videos beyond this, this hot rod, yes, all of this. Robbie got Gordo started and out, yeah, really cool stuff, yeah, really cool, you can check them both out here, yeah, yeah, I'm really excited about that too. the dumb kids are ripping, so okay, let's go back to the brothers app overridden by the chip, no background music. I promise, okay, so some of you have seen it well, some of you have, okay, so some of you have seen it. Austin's car in the canal, that's got a bit of a dull soul and a steam-generating romantic glow, oh, they like to interfere, brother, well, this is your brother Bradley's, yeah, and we're gonna push it back here, put it on the roller, we have covered some. stuff, I think a map sensor on VTech and boost control, so this is a completely stock LS

engine

, yes, Ellis LS VTech, so the bone source bottom actually has a grip on the piston, It's okay, there are no original rods.

I'm trying to remember everything you said that's it so probably around 300 would be a good safe bet, 90 before but that's a bit of pressure yeah yeah it could go either way so it's trying to make the PSC a race this weekend and compete with his brother and the rest of us, so it's like he doesn't have some agreements, thank you, no, yes, the brother who supported him, he is a man who tows his brother's car, yes, or he yanks his brother's car, yes, and he gave him a push to bring his car here, yes, and me.

Sorry I talked about Jamie, no you're good, but he was the one who came and installed these lights. They got me the Honda sign, the coke, the Kona Coast, the Conoco, anyway, the cone sign and then they left me with a scar. wash one we still plan on installing outside the building one of those things we just put off until we got all the permits and you know we can do what we need to do yeah man very cool anyway those are the brothers. so that's their story, they also addressed it, they're painting the red top of Jamie's Dodge truck that saved Cletus and takes us around the world and yeah, anyway, let's dive in.

Just bring them in while we scan, get this going and try to make some jam and chill with y'all, so alright man, it's a good job, yeah, catch a bunch of pickles, alright, so turn this off for everyone I'm trying. To make your life easier, what would you do to make my life super easy? It would be taking out the brown - well, no, the brown. I'll go around it here, I know, but I'll take the floor over there if you go to the board. there's less sub here unless the noise is less filtered yeah just a little easy tech tip for everyone and then the grounding will be carried to the other side that's a good way to do it bro even me I didn't do it that way, see you.

I can always teach someone something new, no matter what it is, always teach an old dog in fruit, yeah, basically, and then this seems to just come out and I don't jump in while we're running, yeah, with all the cool stuff, like that that Go around, anyone who has ever worked with a handle with a camera, it's very difficult if I use one finger to do everything, see the camera, there turn off, let's give them a tornado. A good trick is to have them on a drill bit, right? here, turn them, we should do that, good luck finding a drill, all that, if that loCash cover, loCash racing is out of Arizona, I think we've been in the store and I think we've had it on our channel or in the reinforcement boys.

Yeah he was on the guys channel but he's always working hard for the industry making tons of GTR parts and yeah you gotta go check out his really cool stuff so this is the Honda external jack and if that loCash covers loCash qualifications. Arizona I think we've been in the store and I think we've had him on our channel or voice list yeah so he was on the Boots the Boys channel but he's always working hard for the industry making tons of GTR . parts and yeah you have to go check out their stuff really cool so this is the Honda external plug and we're going to this analog side and we're actually just going to use the sensor ground for the broadband itself and then we're You're going to go to d-10 on this side and that's going to be all we do and then you're going to plug in some numbers and ECU and we should have a wide band yeah and these are good too so we can plug in 0-5 volts so we can we have like oil pressure, fuel pressure or we can monitor the coolant outlet pressures to know if we have a bad head gasket, let's go with the wrench, oh thank you, so in these eight of these AEM series gauges x you have your brown wire which is sensor ground, you have your white wire which is basically analog, so we'll take it to d-10 here and then the sensor ground directly to the ground on the board, which helps us filter out other things .

Okay, and give me 13 to 2.5, just thirteen point two five, man. I guess that's perfectly fine, what was four point three five? This is the one four point three five volts four point three volts four point two five is seventeen point four one so 17.25 two point four perfect okay make the starter controller we have to make this plug right here and we're going to 11, so the odds at the top are equal at the bottom 10 11, so that empty pin right there is where we need to go, all right, choose the tool and press. All right, now it's locked, ready, brother, breaking it by breaking it.

John Doerr here working on our little hot rod for the week. We have a couple of days to put this all back together. Really dragging ass 85 turbo. Really smart. I thought about the future. I did this before. in the first setup, people walk, that's power and your little one does the right thing, they just gave him some time, there you go, hi Marie, pre-planning now. I think it's great, but I'm looking forward to all this working out all sorts of small. The changes are going to be pretty epic, okay, and Austin showed up going over some things, putting some things in, adjusting some things, what's 76, you're Burt, yeah, you were born in 76, cool man, oh man, oh that was sweet, this It's going to be amazing. oh man that's amazing, that makes it look so good, okay we're finally ready, we have a little temporary, I just built a quick base, I think I've got this and we're ready to go, I hope so.

Everyone is having a great time, yes, it's been amazing here, but that's what brought them. Do you want to stop and I'll check on Kelly real quick? I can fix it. What do you think is fantastic about the old one and the new one still has it? plastic oh so there's double plastic it just won't fit okay cut it spit in a second and then I'm going to move almost done oh that's why it doesn't clip in there yeah the speed sensor doesn't hook up there and just need a pic, got it, where's your PNC speed?

Oh, there it is hanging at the bottom, it's in the back. Unique, made two pound impulse bullets. 238 is not a bad place to start. Oh, the throttle cables are too tight. All the rubber is there. Yes, we just arrived. To cut that, you know, I see now this bolt down here on the floor fell out. I don't know, at first it looked like one of the turbo mounting bolts, but it's not, it could have been lying in its way, yeah come on. check all the couplers, it only weighs two pounds, unless that's funny, happy piece of rubber on the throttle cable, that's what was holding it open for him at the end.

I'll cut it up for you and we think it might just be two. pound spring, anything, the word, realize how much boost that man is, I would be fifty percent eight, my math is this like a higher compression, they have to be, I don't know, they have to be a high compression, well , dance, here we go, yeah, Dan, oh. he's on the phone this bottom end is an old old

engine

what's in this because supposedly what we know is that it smells original pistons and rods austin bradley his brother hey i have a question for you what's his last name black black sold a v18 plate v12 so we didn't know if they were like some high compression pistons or what was in them because it's making a little bit of a jam.

He was a master mechanic at Toyota or is he and that's we can't get a small one for example a black one etc. you guys tonight the next day did 400 something like that then okay this is a strong biker look at that a name good tactic no we better set up a shift turn my head on there 381 on the hip there and why do you sit? pretty flat, yeah, I'm not sure why on the hit, you know, why it feels pretty flat, yeah, that was only seven point eight pounds, yeah, I didn't change anything, no, I figured out why we did a little less of impulse that time.

Oops of the game, so we need to tighten the exhaust housing or not the exhaust. We need to tighten the intake compressor and then it should be ready to jam again. We're losing a little bit of momentum. Okay, so the brothers are going home. They're going to fix that, it should be fixable, okay man, I guess you guys are changing a turbo, yeah, no joke, all right, so he's got the new little blocker here and they're going to put it on the car. I thought he would take a beautiful reference and put it in. Okay, okay, here you go, great, very excited, thank you.

Well, this is going to rape, you have no idea. Well guys, we worked on Bradley's car, buttoned up all the little things and then did some Dino cuts and that was it. It was going fine until we saw the turbo, I did something, yes it had a compressor housing failure, got one of their new 3582's, got it last, put it in before we left but we didn't put it back in. on the dyno he loaded, he'll take you to the track when he finishes the set-up there, so we'll put cameras on a scar so you can get a reaction video this PSE weekend, a race I'm super into enthusiastic. about and I hope a lot of you come forward and compete with us and blow this up and make it so big that we all get scared we don't know what to do so either way it's a lot of fun so I appreciate. guys watching, like, subscribe and stay tuned, thank you so much oh and give us some feedback and a little comment and make it positive and we really appreciate it guys, thank you so much.