Monstermax gets a Fighter Jet Engine

which is creating too much pressure and now every time you leave the truck running it blows up all the airlines, it's like the cold is causing a lot of our problems. This is a very good example of how the jet

engine

works. to help us, so I'm on An

engine

is technically quite underpowered for this now I'm pointing downhill. I'm going to see if the thrust of the jet engine will push me. No, how can you even see where you're going? I felt that, I felt that, oh tools everywhere, damn, I know the really nice thing about having two motors is that that doesn't happen, it never

gets

hot because it's evenly distributed between the two, I can drive it in one.

It's really hot. You know what's crazy is every time I started getting stuck and I hit that switch it started moving again. The jet engine literally helped when it was hard to get through things, it's not much but if you were on flat ground on the pavement, this would be crazy, but if you were in a car, it would throw you. I'm impressed that he did the same. Well, as it did, man, honestly, it was still working. I was, I was still moving pretty well. I just overheated the engine. Well, that was a lot of fun.

I came out here expecting this to just go through the snow and the funny thing is, If it weren't for all these little things that showed up, I think it would have worked out just fine. We spent a lot of time, money and effort transporting this here to Utah. It takes a team of like 8 to 10 people to completely take this whole thing apart and put it back together a tah Handler a crane this was Monster Max's first trip away from home after it was built it was a little rushed because we were trying to set up the jet engine if that plane The engine was in a plane it would definitely fly it already exists it's called jet Cody these tires are huge but the truck still weighs 30,000 pounds so we let out a lot of air and unfortunately they are not like that, so we had to use a lot. our nitrogen to refill them, so the air on board would help a lot more if we had a hose ready.

I think the front of this axle shaft was bent so it shakes a lot which caused a lot of problems. The starter motor went out on our rear engine so I couldn't start that, so we were driving on single engine, the pressure sensor on our air compressor froze so it blew up all the airlines and we had no brakes, all sorts of silly things we didn't know until we started really driving it this time, it got really hot and the vibration back here shook everything so the belt flew off. It's like problems that you don't really have with a normal truck.

The reason it broke last time is because we were using a ratchet. belts instead of these limit belts we have here and then we didn't realize that they stretch a lot when you first use them and then the driveshaft angle

gets

worse so it wobbles more when you guys told me to back off , we did it. I fell on this, all these links are a little wobbly now and those are the biggest ones they make. I'm actually considering making this jet fully powered after this with a backup diesel engine in case of emergencies. I didn't realize how much it would cost.

Help if you have a company that makes quality parts, we would love to put them on this truck because everything keeps breaking, it's all there, we just need better things to put it all together, this bad boy is going to climb Everest one day and if not, he's going to landing on top just after reaching the bottom of the sea and a ditch.