YTread Logo
YTread Logo

How TRANSISTORS do MATH

Apr 09, 2024
Learn how a computer adds numbers in one lesson. Inside the computer you will find the motherboard which acts like a chassis inside a car, giving all the components something to connect to. The microprocessor is located on the motherboard. Heat sink on top to prevent overheating. If you remove the microcontroller and look underneath, you will see many wires sticking out of the holes on the motherboard to the main microcontroller. The microcontroller is made of different areas that do different things, such as adding. or store numbers. These areas are often made of one thing: the transistor. Here is a 3D illustration of one of them.
how transistors do math
The base of the transistor is made of a semiconductor, which sometimes conducts electricity and other times prevents it. The semiconductor has charged areas with a positive charge and charged areas with a negative charge. Electricity will not flow between the yellow areas unless the green conductive area is opened. The conductive area will open up on the semiconductor if you place a conductive material like metal on it. The top of the space is covered with an insulating material such as glass and charged with electricity, in order for electricity to flow through the channel connecting the two yellow areas, there must be a source and an outlet (outlet).
how transistors do math

More Interesting Facts About,

how transistors do math...

In other words, an input and an output are also made of conductors. If the input is charged, the output cannot be charged unless the door, which is the piece in the middle, is charged. The door was open. semiconductor, allowing electricity to flow toward the source, on the other side of the semiconductor, to the mouth. The creative thing about this is that there are no moving parts and electricity alone is used to control electricity elsewhere. The idea was to use it to make logic gates. For example, if you have two conductors and you connect electricity to the input of each conductor, then you add a switch to each of the doors and then allow the outputs to flow directly.
how transistors do math
For a lamp, you have created an "or" door, which has this symbol Open the left switch, or open the right switch, or even Both, to get lighting from the lamp if you change the connection method, so that the output of the first connector connects to the input of the second connector: thus you have created an "and" gate, which has this symbol with the "and" gate. If you open the switch only to the left, the lamp will not turn on. . Because the electricity coming from the first conductor has stopped at the second conductor. If you open only the left switch, the lamp will not turn on.
how transistors do math
Because no electricity flows from the first conductor to reach the input of the second conductor. Therefore, to prevent the lamp from turning on, both switches must be turned so that the outlet is open, as well as open and closed. It can be represented by the switches as: closed (0) and open (1), the same as. the light bulb, open and closed, zero and one, zeros and ones are computer language and create their own number system called “binary system” or binary. Let's start counting using the decimal number system, and write down any binary number. We find in another language any number that has a zero and a one.
So to begin we write down the zero because it contains a zero or a one, and in addition to the one we must skip the other decimal numbers until we reach the number 10, and the eleven does not work for the rest either. of the numbers in fact, now we must jump to the tens because we will not get a zero or One until the number 100, and after that 101 is valid, then nothing until the numbers 110 and 111, and we will not find one. and zero again until we reach the number 1000. Well, then we move that 1000 to the bottom and continue counting binary numbers.

If you have any copyright issue, please Contact