HOW TO POLISH FOR THE FIRST TIME! Teaching a beginner,#diydetail #polishblackpaint #goldstandard

It will work out to balance it if you have it and only work within the width of your shoulders. Because every

time

you reach for a limb, you are turning your back and then it is difficult to control the machine, so the rotary is a very difficult machine to control. Lots of vibration. It's hard for you to be stressed. I can see that smile. You know it's a stress smile. Yes, the rotary. It's not that difficult, the machine, the master, it just takes a few minutes of practice, maybe a little more, but once you get it, you understand that leveling is, yeah, it's like nothing, that was the key, so There you have it, so we show you a dual action.

The machine showed you a rotor, but we're talking about people doing this at home, yeah, yeah, and I've never done this before, but you're not going to go out and buy a 500 machine, no, to get a thousand dollar return per your money. exchange, yeah, yeah, so we have another machine that we can use that you've seen before, you might even have one at home, we have our cable, okay, we have our little machine, okay, I might have pumped it too many

time

s. We made our pad, yeah, the same pad we had on the other machine, a spray

polish

, okay, okay, machines, thank you, thank you, this one is much lighter and it's under 30 bucks, that's where you want to go, oh , come to the foreign door.so you want to choose a section that is comfortable, okay, which is very easy to determine what is a good section size, okay, okay, why can't you even put the core on your flat shoulder against the surface, that way your shirt won't rub against the vehicle so your arms go down without your knees, it's okay, you don't have to look at it quite easily or a wet towel, change it for a dry one, we'll check the results there, you still have some

polish

there, yes, so I still have some of those scratches because it's a less aggressive machine, but we've reduced them considerably.

Yes, we look from there. Oh my god, yes. If we look from there to there, there is a big improvement. Now let's do something. a little different this is a pre-sale detail we are not going to invest in the ceramic coating we are not going to do everything we can to make it perfect we want it to be shiny and we want it to look good so I am going to add a little more polish here , so again there's no pressure on the machine, okay, I'm literally sliding the machine along the surface. Now we're going to use our damp towel again to rinse off this wash and once we've done this, this is where we switch it up with a ceramic shine spray that will act as a drying aid.

You saw how difficult it was to dry before I tried it. I felt like before I had to work on it, this didn't work. just go ahead and say yes that doesn't look good you still have some wax on you might get our towels a little damp oh yeah much better you can see this is where we didn't so you're used to. car buyer, what do you think? Oh yeah, I mean, if the paint looked like this, it would be a whole different level, I'd probably consider it more, yeah, now that we've determined what we need to do, we need to polish it and hit it with a damp towel. ceramic shine and dry cap, here we go, there are four of us here, it won't take long which machine you want to use.

A good question, honestly, I felt more comfortable with the rotary, the rotary, yes, someone who had never gone into more detail before. I felt comfortable with the rotor. Yes, then the rotor is yours. Alright. Foreigner, so you polished half the side of the truck. Almost yes. Almost there. Yes. What do you think so far? Alright. You already know. I wanted to stop you halfway because even then. Half of my door panel was like oh my gosh it's starting to slide and then after doing this bottom part I challenged myself and started going up properly. I was comfortable with that.

I could do it very easily, so it's a lot easier when you Understand it and like going slow, the biggest thing that resonated with me was when you said, uh, make sure it's level, yeah, when it's not fighting you and the little inputs. that you can give it, just turn and leave it, and so on. Every time I would like I feel like, oh, he's getting stiff, he's fighting against me, okay, what am I doing? Yeah so I wish God would go back to the two fingers let it slide yeah for me but I enjoyed it it was fun and Ben have you had previous experience polishing yeah but not with the rotor what do you think of the rotary versus the day?

You know, I like it, it's certainly something different, yeah, and it's been a fun experience, right? I'm very curious to see the results will be beautiful yes, yes, very good, uh, do you want to do it or, oh, tired, yes, yes, I know you liked it before, so I'll do it, I'll change it, yes, oversprayed like this Yes, Emily, what do you think? I think it worked. It came out great, I can tell you it didn't even look that good when it was new, so you're the car expert, you buy cars, you sell cars, how much do we increase the value at least from 500 to a thousand knowing the fact that?

This vehicle doesn't have to be polished and all that and cleaned when it is returned to their excellent detailing department now you tried polishing for the

first

time in your life. I did, yes, what machine would you buy if someone gave you a quote to buy? a machine, because it was the easiest for me to balance and work with. I know my husband didn't like it just because he didn't like the cord around his shoulder, however, it was much easier for me to balance and like. being lower as the center of my gravity, yeah it was a lot easier to balance and then just move around, I felt like the one with the bigger battery was a little more cumbersome ok? and why rotary versus DA?

I felt like the DA was, no. I couldn't get it down with a nice clean rhythm. I felt like I was the rotary. I was only able to once I got that balance. Yes, it was clean, I moved back and forth and the end of the rotary. You inspected this with the light. you cleaned it, how many swirls and you know, Halos do you have from polishing? I would say we only have you, you know, Zero for polishing, okay, yeah, well, so for those of you who are afraid to try a rotary, we have someone who I never polished before trying both a DA and a rotary and he preferred the rotary that I made, yes, and the finish speaks for itself, we have never had a mirror finish on this truck before, yes, yes, yes, it is black, it is beautiful and it has a dirty Interior, it We'll see in the next one in the meantime, if you have any questions, comments, thoughts or ideas, leave them below, we're always happy to answer, don't forget to subscribe to DIY Detail and Emily the Audi nerd, see you around. in a little foreign