Fixing a Famous YouTuber's Broken Arm

You're tired of breaking your elbow, well wait, Jesse Wellens broke his elbow and we're going to build an invention to replace the now useless one. I cut off like this hello, welcome to this abrupt, okay, sorry, one second, welcome to This abrupt interruption, the mess today is that this arm was supposed to be built for someone else and we tried to contact them and then Dan Mace broke his arm, which was the whole point of building this as a replacement arm and I think he's a better candidate to send this to, so welcome to the first one they didn't ask for but we need it anyway, someone else, how have we done this?

This video was filmed about two months ago, no, this was being filmed right now to show you. the design mr. bones, take it away, well, end, I'll do it myself. I spent too much time handling this too. What is a cat? How do we come up with something that CAD means cats? They are great. Yes, here is the drawing. Here I will show you. Have Jesse and his bracelet and this robot put together a linear actuator and some kind of strap that goes around his bicep. We haven't figured out how you're going to control it yet.

I put a lot of details here and then just. of giving up as we were falling, you know, they say about people with big feet, big socks, so we have our robotic arm, we're going to be easy and we have our linear actuator, oh, we have maybe. 25% of a plan and we also don't know how to control the closet, we have nothing to squeeze the claw, but it's actually a little difficult to pull, I mean, you can do it by hand, but you like to try. do it electronically this will go here somehow this will be like a pivot I don't know I don't have it I don't have enough hands so it'll be like here oh my gosh can you help me hold this? so it'll be okay, I think it's his left arm, which would be if you stand up, which is easier, keep it like this, this will be it, this will be tied to the arm and it will be like a pivot so everyone can Okay, I'm just here let's look at the linear actuator which seems to be the easiest thing to make and I don't really know what I'm doing right now so like batteries batteries who comes up with these ideas?

Oh, that's really strong. I actually broke my wrist badly in fifth grade and had to put a full arm cast on it. I don't remember what sucked the most, oh I don't know, I don't want to know where you're going with this. Hopefully. Experience might help, but all I think we can do is try to make him a new arm, maybe a better arm, maybe cut off the old one and use it permanently. We have a lot of things to do and I don't have any. idea how to do some of this, let's put something on the bicep rack, don't feel me struggling with this, maybe we've had a better, stronger hand, no, you helped me, that's quick, can you mark this? mark it as just above the elbow I don't really know, so maybe just above the elbow, right there is the pillow, yeah, that's good enough for me, no, it's okay, you know what I get, finish with this, please, and then, well, it's nice and splintery, hey, are we being? too loud again hey thank you thank you we want the watch to rotate on the arm how Genki we wanted to do things because we could work like a hinge with a flange, is that something we are okay with the flange? hinge I don't think it has hinges, I just go to the store and I don't want to leave the house because I'm a hermit, we have zip ties over there and then down if you're drinking hot, scalding coffee.

You'll want to lift it off the table and then lift it up on your face, it could be that we use a flange for a hinge instead of a hinge for a hinge for the linear actuator, the pins that come with it are not the correct ones for this, so you know when you buy something on Amazon and it's like people also bought with this, that's what it was, hey dad, where's the drill? Oh, how's your back? Kimandjohn is not doing well, hey man, John Theurer is back and working out, who are they? Are you talking with that sound?

Can I give you my phone number? Who is that who is that? Don't worry about those noises. It's just my neighbors shredding some carcasses with a tree chipper. Yesterday we abruptly stopped filming and that's it. because I don't know, I have no excuse, but with that what I do have is that this robotic arm works pretty well, I drilled the holes in it, that was a pain in the butt, I kind of want to complain, can the sun and the arm shoot ? down, oh that's not good, it almost broke it, so we have the Kalon, we take the spring off.

Removing the spring made it much easier to pull it down, but the problem is now you have to push it back, we can put a spring like somewhere here to push this up and down it stops making so much noise, so, how do we actually do this? We are still stuck in this problem. I say we like you to help me at all. I got the easy job, you just stand and watch suffering and struggling I brought you a gift we have the fishing line that is coiled and tied to the handle so that it is completely closed cabbage salad open clock closed the beginning of projects I am always much more apathetic because I don't know what we're doing.

I'm not saying we know what we're doing, but you know less about what you're doing once you see the light at the end of the tunnel. I always understand a lot. more excited and now I'm very excited because electronics which I know will be relatively easy, well I say now what do we do? We just stuck an Arduino on it. People have asked for more scientific explanations, so to make this segment exciting, We will have dancing cats, we will use a relay module to control this motor to go up and down and nothing, it means two relays.

We can change this motor terminal for multiple motor or motor terminals to negative and here for the other. some positive in one negative in the other it turns in one direction if you turn them it turns in the other direction that if you do positive positive nothing happens there will be two free states I couldn't have anything it's positive positive and negative negative it was so good with that orange it's a bit depressing to see audience retention in a second hello this is your personalized instructional video mr. Dan, I want to let you know that you basically saved this video if you hadn't

broken

your shoulder, what is consolidation?

Ask about consolidating the fun if that's any consolation. The first thing is to remove your belt. I haven't actually done this before when I say instructional video I mean it's me figuring it out and you watching and I hope this is the first look if we can use this little edge right here Wow we need more holes damn we go higher up in the chest, where is it? It hurt Dan all over, you look so cool when you first put this on, yeah I can't believe this worked so well, you just have to stick your chest out otherwise it starts to slide down, it's okay, great, so I don't need it anymore, but what you will need are the ingredients for today's recipe, which is the energy drink.

William's videos would be boring without it, so first we're going to want to clean up our workspace and I think this is where we start using the arm that has your hand is still fine, right? I'm making a lot of assumptions if your arm is still fine, your hand is still fine. I'm going to assume you can press the button, step one, turn on your new arm. two press the button lower the arm by putting our tongue on the bottom of the two humidity sensors instead of bottoms pokomoko make the movement faster, why do we use humidity sensors and then we hook on an easy to grab part and close Claw? and you know this might take a little bit of practice, I actually don't think I really had to close it there and pick it up again, whoever you want, hit it, just clear our workspace, why is it clicking?

Keep sweeping your workspace. Actually, I do not know. If we needed the clock we should place it like a hook on the top and then lift it. Ok, we have a problem. I can't put it down and then put it down and then do the same thing and just pick it up. so just press the button and just lift the glass yeah tweet cut it again

broken

or just yeah okay Dan and that's the three easy steps to your new arm yeah oh god just email me email if you have problems with it. give me an email when you have problems with him look every time I laugh he just moves we have to send it to him we have no choice of home let's figure out how are we going to grow the channel and expand our audience, if we don't send I don't think we have spent hundreds of dollars on this which relatively speaking is pretty cheap for a prosthetic and in fact I really wanted to drink I'm still really thirsty well Dan I hope you enjoy your new robotic arm I'll mail it to you I'm dead I'm bad unpacking Patrick Gentry a piece of paper and a piece of plastic I guess I'm not going to plug this into my computer I love your videos don't you?

I really have something useful to give you, but here's a USB with a photo of a cat in a song I wrote. You always have a cloud of sound. I think the idea is good, but are there viruses there? Thanks, Patrick, let's play one of Patrick's songs right now. go fast I have to go fast oh oh no Adam Bauer I appreciate it it's an iron it's coming off did you pay money for this he says I'm sorry and also she agreed oh who does the Casey thing where you like she puts on her shirts all at once? by Maxwell Shaw I have to speak quietly because we are on camera at John's house and his parents are sleeping peacefully, that's right, camera.

John still lives at his parents' house, what loser could live in a trailer at his parents' house like me, Vinny. cool, what we have stickers, rest assured, certified trash, someone told me jake was a bad word. Oh brushless motors, my name is Max and I discovered your channel a month ago when you went on the HB podcast and since then I'm pretty sure I've seen all the ones you've posted except the one about making fruit with a car. You didn't say that, but it's probably the one I think embarrasses us the most. Can we agree on that?

Thanks, maximum, the next package, well, less. we are going to open today and this is this shopping cart thing because we didn't have cutting oil and why didn't you send us this two months ago FBA what a weird name there is no letter this is probably the nicest cutting oil I have ever had and will ever have, see you next time in the Power Minute unboxing.