BIG ORDER - Microsoldering tools - Customer ordered half the store.

We have a large

order

today coming from a

customer

. I think it's worth $5,000 or more and I'm just checking on my dad to see how his progress is going. The books. The owner. The box with 500 charging ports. 100 different types of charging ports. but five each, which makes it a 500 port box and we have the North Rich bent and straight array needle probes, very useful. The

customer

order

ed the spudger, some of them and what is this. Oh, this looks like a sharp pen tip, ceramic scissors, and then we. We have pad strips, we have HDMI connectors for most game consoles, PS5, USB3 PS5 connectors, we have the PS4 Pro slim HMI connector, PS4 HDMI, if you flip the box over, we have more on the back, so This box is full of HDMI connectors, we have the X series.

Nintendo switch USBC connector Nintendo switch USBC connector We also have the light in stock, but it is not part of the box. We have Xbox 1 s 1 x and then we have the generic or general HDMI connector. It can be used on many devices. including television receivers, etc., etc., what else do we have? We have the Diamond Tweezer programmer and I think this may be the last Diamond Tweezer we have in stock, or we have more. I have a few more, a few more than we have. We can't get it right now and we only have two more clamps, very popular from the mechanic, but we can't get them and there's this, what's called articulated camera mount.

You can use it to hold your thermal camera or whatever. The thing may be that I have a video about this specific tool, we have the mechanical King clamp. I just want to quickly go over the products and see what the customer

ordered

and this is a tweezer template holder, it comes in a brown box like Most of the products are from our brand and some of them come in simple brown boxes. We have a training board to practice mtech flux soldering. Two syringes, one of them is 5.59 and the other is 2 and 3. I also have a video.

To avoid the difference, both work for all purposes, but the 2 and 3 are a little easier to clean. We have a UV light. They are back in stock. We have two types of UV lights. You can find them on our site. The microshears. The suction tray. and then you have the phone separator, the screen separator thermal camera and then we have the silicone mat. I use it on my bench. I have a couple of them in my bank. A very very nice mat, it has friction when you place it on the bench. It doesn't slide and if you put a device on it it sticks to it too, it doesn't move left or right and I love that about the mat, we have kimac wipes.

The customer also

ordered

the polishing pen, he ordered our other one, the Northridge fix UV. light and those are the cliffs. How many clips did the client order? 1 2 3 4 5 six are used to hold a screen on the iPad if you are installing a screen on an iPad and want to hold it, use the clips and another Excellent clamp made by a mechanic. I have this one on my bench and I also love it because it's long and I love the weight of that clamp. Very durable and the knife blades were ordered by the customer. I think all the blades are six different types of blades and we have the power cord for iPads.

To power the iPad without a battery extractor, this is one of the best clips we have in stock. We have the curved one and the straight one. I don't know if the customer ordered both. We have Lal welding, the Northri Fix double head brush lever

tools

and This is for the knuckle arm that the customer ordered and the customer also ordered the North F Fix 0.3mm welding wire, very common, thick braid North Rich Fix. This braid is not like any other braid on the market, it is very thick and very hard. it's not one of those braided wigs that breaks easily and it comes in packaging like this, so we have this one that is a pliers that opens outwards to open the keys with another brush or is it the same brush, okay, Lowel solder, yes, you already did it. about that and this one, let me show you what that tool is.

You press and then you see the claws. Great, if you want to hold a screw, it has many uses, it is a multi-purpose tool, then we have this double head lever spudger tool set. BGA set, we have Captain tape of enameled and unenameled wire and we have the b7000 glue, very useful for gluing a screen on an iPad or phone or whatever the case may be, we have a voltmeter. I use it on my bench every day. We have the Northridge Fix UV Mask, one of the best UV masks on the market. What you do is apply a little bit of solder mask to cover any exposed or scratched copper areas on the board.

UV light and some hot air and this. The welding mask will harden in a few seconds, then you have a dust blower that the customer also ordered. Oh, this one here I use every day and I also use it to remove 12 vpwr connectors. It's a bent pliers. What else do we have? The blades that the customer ordered. all the blades and extras are fine and what is this? This is a tip cleaner for your soldering iron. You won't be able to see it but you can see pictures of our side and then you have an aluminum tap and you have multimeter probes.

The same ones I use in every video, in fact most of the

tools

you see here I use at my bench every day, we don't sell anything that we don't use tabs or silicone thermal pads, there is no thermal paste for pliers and of course In fact, this is the tip cleaner. So what's the other one? Let me ask you, what is this? H Tape Holder oh, the Tape Holder, the soldering iron tip holder, it holds 800 different types of soldering iron tips, so that's box one, the tools are not going to fit all in one box, but we have another box here and going this way, the customer ordered the 10 counterfeit North Rich books, 2011 size resistors and capacitors 402 603 805 and 1206 and has the limited edition North Witch Fix books, the silver printed board holder , we already reviewed those why am I?

I go over them again now that we have the NF dummy, the North F fix dummy, one of the best dummies out there and then we have the 20 volt PD charger that you can charge uh 20 volts and this one I think goes up to 12 volts if you don't. I'm wrong and the big boss uses this on his bench and you can charge up to eight devices at the same time and also a wireless charger on top. Now here we have the universal laptop charger. I think there are more than 70 pieces inside. Here it comes with the adapter the charging adapter the tips and a lot of things that you can check out on our website it's called a universal laptop charger and we already went over this I think we have two mats in addition to the other one that the customer ordered uh this one Oh, the customer ordered NF mini and three additional tips.

We already have three points inside. We have three points inside. So the customer ordered the NF mini with three prongs inside and three extra prongs. So it has six points. Let me put this aside. one looks like a nozzle for the Attin station because the customer ordered an Attin hot air station right here and I think we have the microscope, the North Bri Fix microscope here, this is no, this is the microscope, oh oh, this is the light anti-glare. Then this is the Northw Fix anti-glare light. The box is heavy because the anti-glare light is a very solid tool.

Next we have the solder roll holder which holds two solder rolls and this is the Northridge Fix Microscope. Let me check it. open it up for me and look at this beauty okay and the microscope of course comes with everything you need and it also comes with two bot lenses 0.5 and 0.75 along with the 180x lens everything we sell here , our quality checked by the factory and by us and we have the popular Sunshine multimeter. We have sold more Sunshine multimeters than Sunshine themselves. How is it possible? We do miracles. Here's how and what it is. This is the old light and what is this.

Oh, this is the ring light. 96 LED ring. it turns on here and the customer also ordered the microscope articulated arm, but we don't have it in stock yet. As soon as we have it again, we will send it to the customer as a separate package. The customer ordered the soldering station, the popular t3b soldering station together with two handles and six tips, so we have the big handle, the 210 handle and the 115 handle, three 210 tips, the bent knife and the conle and it Same with handle 115 and also the customer asked for the nf. Smoke extractor device.

Well, I made a whole video about this one. You can see it and the device looks like this nf. Fu, the only thing missing from the customer's order is the articulating arm for the microscope, it's already on the way, we should have it soon and just so you know the microscopes are in stock, but the articulating arm is not in stock, we are expecting. a shipment at any time the shipment will arrive for both because those articulated arms are very, very heavy so we have the microscopes in stock but not the arms and customers order right now 1 2 3 4 five pages okay, just wanted to review One quick thing I want to go over is the shipping cost.

We are charging the customer $39.95 and that is basically a flat rate shipping charge. I can guarantee you that shipping those boxers is going to cost us over $120. I mean, no Amazon we don't have the weight and dimensions of each item, we don't know how big the box size will be when we ship the customer's box , so they charge us for shipping based on the size of the box and the weight of the box $39 will not cover the shipping cost, we are going to pay a lot more, but the customer has a large order and as a courtesy we will pay out of pocket shipping and we will send the items as soon as possible. having to ship the boom arm once we have it in stock and that's how it works so that's it, we're going to end the video right here.

I hope you enjoyed it, let me know what you think, leave it in the comments. Don't forget to like and subscribe and we will do something else in the next video better than Factory.