Attempting Gyeon Ceramics for the First Time!

Hey guys Joe, here at JP, details and today you'll be joining me as I applied G in ceramic coatings for the

first

time

, so as I mentioned in preparing for the world's most stressful wedding car, there was a lot left unsaid about G in coatings.

ceramics

today. video to mix things up, I'm going to try to use the DSLR footage that I didn't use in the

first

video, however, some of it will be the same, although the narration is completely different, so the G on ceramic coatings that I'm going to show that the Today's application process is called jian timing treatment and it consists of two layers of geomes and a single layer of jian skin when the owner of the Mercedes CLS 63 AMG checked in and told me Joe, I've done my own research now while I you apply John Synchro.

I said no problem. Jim, how long does ceramic coating last? He said I have no idea how long it lasts. What do you mean?. I said it's five years of coding a three years one twelve months or two years he said Yes, it's the five year coating I said that's fair, Jim. In the mean

time

, I'll do some research and look forward to having the car delivered, as you can see. It has now been left and I have begun the detail preparation stages. Please do not use the Like buttons as a survey. I've since realized and it's the reason ivory uploaded this video but it turns out she's asking people to dislike her video.

Videos either way could, in fact, doom this video to any traction with YouTube's algorithm. Hit the like button for now to show your support unless you really didn't like the video and I'll see if I can put a poll on it. Below is which detailed manufacturer you prefer, although please note that I have done my best with the narration to not show any bias towards any of the manufacturers and I want to let my personal experience and hard data give a good review about jian synchro . I have nothing to gain by favoring either manufacturer, of course the vehicle must be washed thoroughly without contamination before being dried and then machine polished, which was covered in great detail in the first version of this video, so be sure to review that version.

If you haven't seen it before at a time that suits you with this version of the video, I want to continue the topic of GM products. I can give you my honest thoughts and opinions. Gyan Iron Remover was the Jeon thirst product I used. the day, so let's give this a quick fire review. Jeon iron is a top quality iron residue remover and even if I tried I couldn't find anything bad to say about it, it doesn't smell as bad as others. iron scrap removers it is very effective its staying time is good it works and I would say this is one of the best iron scrap removers on the market this product is highly recommended by me so let's move on to the next product that I mentioned I'm going to skip most of the detail stages, the ones that do not contain G in the products and I only used certain ones that were supplied by my client, so next is G in the preparation of Q to M.

The preparation of QM is essentially the jion's version of a white panel or IPA spray to remove polishing oils and paint residue to prepare the surface for ceramic coating application Q to M preparation is a little different than the G tannic white panel that I usually use, However, this isn't to say it's a bad product, jion's version doesn't reek of alcohol to begin with and almost smells a little fruity, which certainly isn't a bad thing, it works well, the residue is easy to remove and it definitely feels as if it was preparing the surface perfectly. I'm pretty sure that if I were to apply a large amount of product to the surface, it would still be nice and easy to completely remove 2g of products and I'm extremely pleased with just a quick look at the before and after of the one-stage machine polish.

An upgrade is needed on the driver's side of the AMG showing some nice resolutions before starting jian synchro to read the instructions as I was not yet familiar with the products. My biggest question was which bottle to apply first, since there were three. I read quickly later and figured out the combination and started using the Jian block and the suede applicator to apply the first layer of geomes starting with the hood which is what I always do and on first impressions I would say the coating itself It's a slightly thicker substance compared to Jeter and his crystal light serum, something I don't think I managed to capture on camera, which is unfortunate is the fact that the coating appears to have silver metallic flakes when you spread the coating. through the panel.

I was completely mesmerized by the flakes, something you'll have to take my word for, but if you try it yourself you'll see exactly what I mean and I bet you'll be mesmerized too. The coating was nice and easy to spread across the panel and didn't dry any faster than the crystal serum, so it didn't give me any bad thoughts or headaches in the early stages of applying it, shortly afterwards with the first With half of the hood properly covered, I grabbed my first microfiber towel and began removing excess debris. The elimination process absolutely surprised me. I just couldn't believe how quickly the excess product residue was removed after flipping the first hour once and giving the panel a second wipe over the excess product residue. to remove it completely if it was G tonic Crystal serum light, then at this point I can guarantee that 5 times more excess residue will be left on the surface.

I showed off my second microfiber towel and gave the panel a final wipe and to my amazement. the coating residue was completely removed, this usually takes five times as long when we do the black treatment with the g10 xes, so I was wondering why that was, and more on that shortly. One thing I couldn't get used to was the Gion block and chamois applicator considering I've been using G 10x romics for over three years. I've gotten more used to it than the G Technic Finger Foam Applicator. I opted to move on to the foam finger applicator and began applying the first coat. from geomos to the driver's side door with initial thoughts of amazement in terms of how easy and effortless it is to apply this ceramic coating, the easiest things with ceramic coatings are applying them and the difficult or time consuming part is often remove extracts without a There is no doubt: about how easy and effortless it is to remove or polish the coating.

I highly recommend Gian Cinco for some first-time ceramic users, although there are reasons and good reasons why, as a two-wire, they would recommend the g10 black or overtreatment. For the slightly more advanced user, the first two coats of GMO will essentially form a hard shell around the vehicle to offer wash resistance, dog retention, a slippery finish and ultimately a hard base coat for maximum protection. The rest of the vehicle was finished. The first two coats of OGM were done away with, which was accomplished in record ceramic coating application time due to how easy it is to essentially polish this material.

The waiting times to apply the three layers are after applying the first layer of mousse, you have to wait. one hour before playing the second one and after finishing the second layer of Mo's, you must wait four hours before applying the last layer of skin. You should then leave the vehicle inside the unit for twelve hours to fully harden and cure before drinking. Put it back outside if you have an infrared heat lamp, this will speed up drying times; however, I don't have one with the first two coats of OGM completed and I was pleasantly surprised at how quickly I finished everything after those last four hours.

After finishing the interior and engine bay I was waiting for the first two coats to harden, it was time to apply G to the skin once again using the G tonic finger foam applicator to apply the ceramic coating, which can seen as sacrilege, and not being a Gian applicator, although in my world they both do the same thing, I'm just used to the technical G variant, the single top coat of G was applied again to the skin, it's a very similar story in compared to GMOs, which is nice. and an easy application process that ensures complete and even coverage, and when you have spread the ceramic coating as evenly as possible around a panel, which usually takes a couple of minutes, the excess residue is gently buffed and removed immediately after using a new one. microfiber towel, this process is completed on the entire vehicle and when finished, will need 12 hours to fully cure while remaining inside the unit.

The jion skin will provide the vehicle with an ultra-hydrophobic top layer. In fact, I would even go as far as saying that it will be an unbeatable and revolutionary ultra hydrophobic top coat to give the vehicle a ridiculous amount of deep shine and self-cleaning characteristics. I'm not sure where I stand on the legal side when it comes to expressing my own opinion to the world on YouTube that doesn't agree with the manufacturer's description of their own product, but considering this is my own YouTube channel and At the end of the day this is just my own opinion, to start I will give you my honest thoughts on the Jian's description of the product taken from Jian's website q2 Mo's is the toughest automotive paint coating available to a wide range of users the extraordinary hardness of the coating preserves the effects achieved with paint correction combined with the extreme softness of the q2 top layer of leather.

The q2 synchronized coating system provides immense benefits during daily maintenance routines, making regular car care be frequent, I'm not sure what it means and easier, so I want to say that this is not the hardest car paint coating available for a wide range of users because that crown is well held by the Qi technics black treatment 9h c SL which is also available to the average driveway detailer i.e. xov lightened crystal serum for each coat of ceramic jian adds 2 page hardness to the paint which will mean that after three layers would have built a 6H hardness coating, but with the G technique you get a 9h hardness coating from all three layers, so that debate ends as well.

Q 2 synchro is the most advanced and widely available coating offered by Jian. Their goal is to offer a professional coating experience to all external customers. The Certified Detailer Program Your multi-coat application ends with the application of Q2 Skin, an advanced silicone-based top coat that provides exceptional softness and unmatched hydrophobicity despite the three-coat application, both base and top coat are easy to use and easy to apply, which I completely agree with Turns out jian synchro is a two year ceramic coating that is incredibly easy to apply and definitely worth a look. If you are considering applying a ceramic coating, I will say with confidence that jian synchro will still be more water repellent than g.

Coating equivalent to technic, although in two years you will have to use jian again. An easy way to maintain g technic CSL black water repellent for those five years and, just as the water repellent is jian synchro, is to use a maintenance wet spray as some detail. ceramic boost car pro hydro to light g tonic c1 liquid crystal or even g wet coat jian synchro is good, in fact I would even go as far as to say that it is a revolutionary ceramic coating in its own right, but the mere fact that it only It lasted two years and was a big disappointment.

I was hugely impressed with the synchro coatings. I put jion's website in the description box below so you can check it out. Don't use the Like buttons as a survey. Since then I have realized. and it's the reason everyone uploaded this video, but it turns out that asking people to dislike your videos in any way could, in fact, doom this video to any traction with YouTube's algorithm. Hit the like button for now to show your support unless you really didn't like the video and I'll see if I can put a poll in the description below about which detail maker you prefer.

Be sure to let me know your thoughts on the video in the comments section below. Make sure you subscribe. to the channel if you haven't already and don't forget to hit the notification bell icon just to make sure you don't miss a lot of upcoming content. Be sure to follow me on Facebook and Instagram, just look for details from JP. I hope you enjoy today's video and I hope to see you in the next one. I guess you'll come in, yeah.