427 Ford on the Dyno - Nick Tests the Blue Oval

pleasant. Buick authorized service. Okay, nice. Nick would love to take the big Buick for a ride, but. You have work waiting for you in the

dyno

room Your client has arrived and it's time to fire up the Ford 427 Remember Nick didn't build this engine so he won't be doing any experiments or doing research and development Today your client brought the engine here for final testing and a

dyno

test, that's what you'll get, yeah, I'm going to make a fool of myself, now we're going to launch the 3000, go up 300 rpm per second to 5800, it's pretty smooth here, hey, it's a lot of fun, idiot.

Pretty good, it's pretty flat so it should be a good tram. The boring, caressed Ford has good power even with the small intake manifold. The first survey gives 481 horsepower and almost five hundred and eight pounds of torque. We will do another test. to go back to the 1750 carburetor and then we'll go to 8:30 CFM, okay, we'll do another test back, yeah, we'll go with the 30 gate, okay, we'll put the 8:30, we made some more horses, yeah, 488, okay, say it's pretty consistent, hey, not a little woody, 30 CFM, okay, let's go to the bigger car. now 650 8:30 I'm going to try to hit the five hun horde we just did 48, so let's try an 8:30 card and go from there today, we have a lot of Fords happening here in my store, very rare. but you know what's wrong is that the engine sounds pretty good with the bigger carburetor but it doesn't make any more power, so Nick decides to use a 750 CFM the same size the customer will use on the car and adds a one inch one . spacer to the setup to give us more mini intake manifold because I think this intake manifold itself so we're going to use a one inch spacer called super football suction cup and we're going to test it and do another test consecutively with the original property that it has, which It's a 750 and we left it at 29 degrees just to give it more plan, it's like putting in a bigger intake manifold, this is what I love making noises in a rehearsal room, hey let's make some noises I'm ready. are you ready God, I hate that starter, you could run a little leaner with a spacer, bingo, you did it, yeah, and it's a 750 carburetor.

Wow, my God, that would be pulling five, almost 533, no problem, buddy , this is good, yes, the little Ford is over. generating 500 and 3.3 horsepower and 530 points of torque, that should be enough for Eleanor Build customers and if sometimes you just look down at the computer, you'll see our merchandise just like our stuff is silent and all you. Love it or check out a picture and garage mix, thanks.