#1054 Incredible Shimmery Butterfly Resin Coasters

that, I'm actually going to have to dip one, okay, um, I'm just going to do it, you don't want to see me do it again, yeah, okay, I'll mix it up a little bit. I'll be back in five wait don't go anywhere it's very hard to mix such a small amount one ounce and I have a lot of bubbles I'll burn it off later okay then oh there are some bubbles I have a torch on his back , okay, let's throw in a little more and hopefully we'll cover it. I'm going to pour it in enough to cover that little thorax, this one is pretty good, it's already covered so we don't need much. a lot in it, but I'll put a little more in anyway and then I'll stand here and look up at the light from the window and that'll show me which ones need a little more. and I'll bring it down in a minute so you can take a look at it too, okay, so this one its head is still sticking out, okay, back up again and this antenna is the one that was trying to stick out before and I didn't want to stay, maybe I had to go back and push it down a few times, actually put a little bit more on it, I hope 30 grams was enough, one ounce, now I can also see some little bubbles on the top when you stand up. come back like this and you look up at the top into the light you can also see the bubbles just sitting on top of the wings okay let's take another little look yeah nothing is peeking out and I can see that these two at the end here Can accommodate a little more

resin

, so I'll use all of it since I have it, it won't overflow.

I'm just going to add everything that's left over and then I'll bring them down and I'll show you what I mean by look up, let's take another little look, yeah, that's it, okay, clean up my mess, now let me just let me clean this up and then I can take off my gloves, put that there, put that. there put that there, take off my gloves and then I won't have

resin

anymore there we go and turn off the ring light and we'll take you down and I'll show you what I mean by look up here we're going to see that because I have a window right there, like this which if you look at the top you can see if there's anything poking out you can see if there are bubbles and everything looks good so there we go and they look so pretty we're actually getting some. nice effects with that greenish turquoise blue around the edges and then that clear one with the glitter that looks really pretty.

I mean, I would have liked a little more glitter in the center, but next time, like I said, I might try a piping bag. to go around the edge a little bit, but I'm still very happy with them. Okay, I'll cover them now with my trusty plastic crate and then, yeah, we'll unmold them tomorrow. I'll give them another quick hit in about five. minutes when the bubbles have stopped rising um and I'll see you tomorrow to unmold it will be a lot of fun looking forward to this see you then good morning here we go we have this sun coming in from the moon from the morning sun here so let's take a little look, it comes out very easily, I've got a little bit of overflow right there that I'm going to have to trim, but look, we've got the transparency, yeah, it shouldn't have that behind it, so there's all of our silver the um, the bright white, you know it's heavy, so it sinks, but that's okay because I just wanted to have a little bit of that out there, you know, shining, so there's that one, what if I should wait until my sun is gone anyway?

By doing that you get one to come out nice and easy again, transparency there on the back, beautiful, I've got that little bit of darkness around the edges and then it gets lighter and lighter and then of course you have the light. center what do you think do you like it I love it I love it now I just have to decide if I want to paint the silver side or not it's shining in the sun there I'm not sure if I'll probably look there is my little layer of blue first and then the clear one I think I'm going to give it a coat of silver I think it's going to look really nice oops there we go look I'm in the shadows now come the other way there we go there's that all pretty and

shimmery

I love it let me know what you think of these guys do you like them obviously they were in the shadow now in the shadows but they were in the sun the sun is almost gone comes through this window between six and six and seven o'clock in the morning, so it depends on what time you get here.

I haven't had my coffee yet. I wanted to come and do this. I thought they would look really pretty in the sun, so here we go, there they are. I will do that. some silver edges and I'll place them outside and show you the finished product. I hope you enjoyed this video, well, see you soon, bye for now. Hi guys, I decided to paint the edges, so I'm using this one. and I sanded some of those little overflow areas with just my nail file uh it wasn't enough to do a dremel so I just did it, so pretty I love them, I really wasn't sure I wanted to do it but then I thought okay. silver glitter in the center would be really nice if it was like that it would just be picked up by the silver edge there so that's what I'm going to do so here we go pretty basic just paint it and I love this decorative color.

Pen, I have a gold one, a silver one and a copper one. I started using the 24k krylon. This works much better if there's a little hole there, a bubble like you know you can go to town. and sand the sides as much as you want but look I'm not going to do it I'm not selling them or I'm just going to I don't know what I'm going to do with them I can sell them if anyone wants them, they are heat resistant up to 67 degrees Celsius because I use platinum. I'm not sure what that is in degrees Fahrenheit.

I would have to look it up, but yes, it covers much more easily. I think one coat is enough and it just softens like it doesn't show little brush strokes and things like that that some of the other ones do and if it starts to run out you just push it, push it down and that will stop the color from flowing again so it's really very easy. go all the way around, concentrate if you make a mistake and you have paint left on top, um, you can if you're quick enough, you can wipe it off right away, but if it's there for more than two seconds, um, you'll have to get a little bit of acetone and wipe it off, which I'll probably have to do with that, we'll see if my little line will cover it or not, so it's a little spongy on this edge, it's not as flat as it used to be, but all you have to do is do is put a little bit on the top of the coaster and a little bit outside and just run it over and you'll find that the tip of the pen sits in that groove there on the edge so it doesn't slip and around we go pretty easily.

We're going to make sure that your wet sides don't touch the inside of your hand because then you know it's going to transfer to this resin piece or something. otherwise and it would be a horrible mess, oh look it covered it, that's where I went over the edge so now let them dry and then I'll put them outside in the sun for a photo shoot, okay I'll see. You for the next video, bye for now, I love these, ah you.