02 - introdução aos workshops - Montagem da bancada

Well, second class, then from the

introduc

tion to the

workshops

I am going to show you how I assemble my bench, the first thing we do when we are going to assemble the bench is pack all the materials that we are going to take. to have contact, then everything that we are going to have contact with or the skin cleansing spray the ink the alcohol transfer gel if you are going to use it in the middle of the tattoo the Vaseline of a protected screen important here the door was closed So, everything what we touch during the tattoo should be isolated with the PVC film because then there is no risk of contamination, so the first step is this, I use this glass table, everything is packed and this will be my work area.

This will be where I will leave my paint and it is important to remember that this area should remain as free as possible, the less things here the better, because this is the place where our ink will be stored, some paper towels so we can use during the tattoo so it is very important that this area is as free as possible whoever uses a sliding font has to pack this little tip here on the button so that he can use it during the tattoo, right, it is very easy to pack it, just pack it there with the film of PVC and that's it, it's protected, the first step we do is prepare the batochi holder, then you click on the door, that one is already here, it's already in the club, right, then we are ready to use. the door here, it's not necessary when we're working with tattoos, but it's important because I'm going to show you how to hold an a or e on the bench, if we don't have the we can do it remembering that the button should always be in the place where it came from, no They are sterilized so you always have to close it well so that when we use it, I will separate our four potatoes here when we use it or touch it directly on the table, what happens when we wet a needle, we can hit it and turn it around and when it turns around it does a huge disaster for those who do not use the batochi door, I recommend that you do the following, take a little Vaseline, well, put it on the table and take the lipstick and just fit it there, that's it, it's firm, it won't fall off with the touch of the needle, since I use the touch stand, there is no need to do this but there is something we have to do first, which I usually do with a toothpick, which is how I pack it, it is already closed here in the storage area glutes sport, then what do I do, I open a hole, right on the sides so that it fits better, I am going to make a hole in two and I am going to leave two without the holes, in fact it is going to stay there so that you have it as reference and I'm going to put one in without drilling it first so you can see how it looks, so when I take my batochi and fit it, it fits perfectly in the space, it fits well, it's firm, there's no problem with it falling. when I don't make this hole, what happens is that I can even push it, it will rise and then rise every time because it's not enough to drill a hole down there, so we make the hole right, let's leave this. free area so that the button fits correctly, now I am going to start assembling the machines, okay, I like to assemble the machines first because then we can access them to see if everything is correct, the only problem is to test the assembly of the machines. beforehand is that you have to be very careful not to hit the needle and not damage it, so what am I going to do?

Ok, once this is done, I'm going to separate my needles, these needles are already open, I went to record at the other mall and I couldn't, I forgot to press rec so I left my painting needles separated and behind, ok, I'm going to use the metal nozzle so you can see how it works, so when we open the toe and the needle we have this option of this thread here, mine, it's always free for us to pull here, it's to pull straight here, if you're going to open it using force, it is important to remember to never force the beak, you can apply force here from behind and tear it here, okay, and then there will be no risk of damaging the tip and my metal beak, right, and the needles, the same, the needles, it already comes with a case that we can take them out, but if we force them, we also always force them by the art above, never by the needle so as not to damage them, now, with the needles done this way, you always take care of the tip so as not to damage the tip, okay, the same thing happens with our needle, I'm going to take it out from here and leave it separate, okay.

Come on, so for the first assembly of the coil machine, well, it is always important to have access to the top rubber, that it is not loose because if it is loose it will not do its job, which is to soften it. a little bit dull and force it to come back softer, so that that doesn't end up happening, we always leave it loose here because how we are going to attach the needle to the toe, we already have it ready, so let's go, I. I'll take my needle remembering here on the needle, the weld of the weld is always down, straight, and when we lift the needle up, it comes backwards, so we give it a very slight twist, just so it can go straight. contact with the tip of something that is the following, when we place it we never force the needle against the tip because by forcing it we run the risk that some small part of the needle hits some point and bends or becomes dull, the thread has been lost something like that, then we place it very carefully until we reach the bottom and when we reach the bottom and when it is wedged in what we do we just release it until it comes out, it came at the tip.

For the tip everything is fine ok ok I'm going to go look here at this space in the tip, if my mother-in-law is looking down the welding of the rod has to end here, okay, and then the welding of the needle has to be facing down, which is where you will get the ink and carry it, right, ready, I'm going to get a buttonhole, it is important that this balloon is always changed, it is very cheap. in stores so you can buy a lot so put the eyelet of the lens this way I know which direction my needle is.

I come with the machine and it looks like an open screw, right, I put it there as soon as I put it on. , I lift it to hook it with the right mallet, it engages with the mallet, I can adjust the depth of my needle here, I am going to leave 1 m outside more or less because when it makes the compass, it will come out a lot and that way it will shape it, it will come back and bring enough ink to load it, once it is level, we press it, we close it very tightly, it is not necessary to force it much, okay, but we just leave it firm and we have the machine almost ready, what is missing is our elastic, right? our elastic will already be used here to hold this needle, the elastic is placed right in the middle here and sometimes when the elastic has already been used. , look what we can do, we can turn it like this to force its elasticity a little more and give it a second turn, what's wrong with this, it will get stuck a lot, child, okay, then it will cut the machine a little. little more, but in some machines it is necessary to do this if it is not necessary, all the way around, what can you do, you can take it out, turn it and fit it in this part of the line up here, because this small part up top.

Here it is going to give us a little more grip since we already have the strength we need to hold this rubber band correctly, it is used to see that it always hits straight, it will always hit straight, it will never hit like that, understand it. You can't hit it like this, otherwise the whole line will change, so let's make our machine the other way around, there are some people who like to bend the tip of the needle, but the tip of the needle to hand it over we can. never use this side here there is always the welding side and very light a real slight one just to keep it lower Touch the plastic one, it's easier, just drop it and everything is ok, remembering that the welding will be downwards, right? on the needles, then everything is ok.

The machine that I use is rotary, this one is strong and has a support system on the rod, so when I put it on I just give it a little click and it's already firm, so. I can put it up there, it fits there and I'm just going to give a little bit to my son here, ready, it's ready, now I'm going to measure more or less the depth of the needle and if we're going to do it more precisely later, but it's just to get an idea of ​​where we are going to do our tightening since our machine is assembled, when we have the machine ready we should go to the price cord to turn it on now and do the test because I like to do the test first because if there is any problem if I have to make some modification to the machine, make an adjustment, something I do at the beginning of the tattoo and not when I am ready to start tattooing, but that is also a personal taste, okay, come on, so to protect the clip cable, I'm going to use my clip cable for the trace machine, okay, it's a common cut clip, it's not RCA, and these here are the clip cable protectors, okay, they come with a closed side and the other side open, right, that's ideal when we put it here, there's still a vacuum here, but it can't fill this vacuum, so what we do is we cut a very small spot here, on the right, and on the side open we give a very slight surprise, blowing here, let's make it come, I left, it's easier to fit our clipcord on the end, so put it there, just push it, we always put it, we point out that it goes to the source first because this We will use the other side to protect even this part here, which is where we are going to have contact. with the clip cord, right, that's what we do, we make this fold here in ah, okay, and we always leave a little bit of space here, this space is where our tape goes, so you can use tape, you can use Pon a little tape of your choice and it is now protected, we are just going to leave the clipcord firm here, ready, our clipcord is protected, we can now turn on the machine and remembering that the clipcord has a positive side. and the negative is important to identify this the positive always goes down, this is what we do with this machine and we always check if the elastic is strong enough to prevent this part from shaking and now it is perfect, I have my machine ready, okay? , I can now put it aside, remembering that when the machine is ready, we always have to be careful not to hit the needle anywhere, not to touch it in one place, mainly because it needs to be in stereo and it needs to be in stereo. and it can't be damaged, right, same thing.

Now I'm going to do it with my clip cable, but okay, I'm going to turn on my machine, then I'm going to plug it back in here, I'm going to do it. to lower the voltage a little, because it's treatable, it's going to work differently and I'm going to see if everything is okay with mine, its measurement, and here for me it's great, it comes out like 23 mm, ok, and I already have my two machines ready, what am I going to do now, I am going to do that process of taking the Vaseline, the Vaseline, we will do it in vain like this and we will leave this part above. open because when I go to get it I'm going to use a paper towel, I open it and then I come and take a little bit because if it stays open during the procedure there will be a greater risk of contamination.

It's out and no, it's not worth it, you can pack it with PVC film too, but if you always use paper towels, that's fine too, so we come with a toothpick, always a new toothpick, okay, we come with a. toothpick and I take out a quantity and I leave it there quantity on the table, correct, save our Vaseline, I pass well, another important thing that you should have is a small cup with distilled water, here if you want to dilute the paint or anything like that, you can dilute it in water, I use this small cup because I use a little dilution in the needle and here in the needle only when I clean it from one to another, but you can get that small cup a little bigger for coffee too ok now I'm going to apply them the bandage, some of you who use it, I don't know if everyone uses it, likes to use it, I think the bandage is very important because it is made of a little fabric, you end up not taking as much Vaseline, it doesn't slip, it is rubbery, it ends up slipping at times , ok, so I always end up using it, it's very easy to use, a little piece comes off like that.

It depends, if you want to make the little one fatter, you can take a little piece that is a little bigger, okay, but then take a little piece and put it in your machine, always making sure that the needle doesn't. It doesn't stick anywhere and is self-adhesive, so what do we do? It's on itself, it's like Velcro, it's similar to Velcro, okay, and here it's already stuck, oh, so I'm just going to stretch it out to make. How sticky, okay, finished, tighten it well and leave it tight, hello, and now we have our machine here ready to work with the appropriate bandage, all this is already done.

As the last step, we use the paint that we are. We are going to put our paint on the buttocks of everyone we are going to use, but a very important tip about paint is the following whenever we are going to use paint we have to protect our bench first, so the ideal is to put some paper. towel, put the door, hit it with any paint that falls here, it doesn't make such a big mess, okay, and then we come with the paper towel, we always leave one aside because when we get paint we pack it all up. around but this upper part is not this partpeople never on the coast nela never fear that it will always be free because that area here is an area that people can contaminate will contaminate or beco and there it ends up contaminating the fifth all planting that before using ink and tem I take it out for about 30 seconds to 1 minute, but sometimes I notice that the ball also releases or in some cases like I'm using an ink that I use for training, it's not empty until the battery goes out.

It's easy but it's important that I see that ball beating when it's tinting, but wait, that ball is beating with som more opaque as well as more hard, it's not so bad.mexeu a lot of ink to people see with paper towel stick the pontinha da ink open the deixa ela pontinha and when people to place people face like this I always put a finger before and let it go pingando lá tá because isso because it eu to do Otherwise, for example, you can throw the ink here as well or clear it out as if you don't have much control and you might end up sending the ink to the sides or the worst hypotheticals, costing the ink all over the place because people can't cost the ink because when people report it, when you give that ink it will create a void inside and then when people cost the ink it will study again and there it will play a contaminated ink people end up having to discard the entire tube because it is so important always place a finger as if packing or you can place my finger as you say, it will be better but you always place a finger and leave it pinging the same thing with diluent with everything that is related to ink because it can't cost ali right now it's right Our machines coil machine have to be with the batida of the solder and to have the batida of the release, which has never been so for certain, it has to be always quiet, everything is done with the machines, or that people have to separate enough paper towels from each other.

The paper towel in a long container will pass with the ink left in a quiet container that will be useful for people who do not need to glue it every time. The paper towel roll ends up leaving several pieces separated in pieces that When you need to stick a novinho ele use and everything is certain to use the violence, it is important that when you change from one to another you have to clean the water for it, do not carry it and after you clean the water you have to throw away some paper as well as leave it out. all to water because it feels like water is going to influence not tom two seus dhatus outras inks logical that with a colorful everything assim fun é uma forma tá então é isso galera sente because eu amount to minha bench you can change the jeito de vocês podem assemble as you form more calm for you but in the same way that I amount and from here to people only follow for tatuagem when they have more of a needle more a number of needles for machine and always left to use that number after the needles are dated and after The assembly with new needles is certain of the shot, and the boot does not boot or the new needle is something that happens frequently when people tattoo with various types of needles, but it is important to note that this area is here in our current work area.

It has to be taken care of so as not to be contaminated by anything.