Smart For Two Coupe Light Bulb Change

Hi, I'm Gareth Rodgers, this is

smart

, yes, so we're going to look at changing the

bulb

on the Smart Fortwo Kupe, this is a 2008 model. Well, the first thing we need to do is get access to the front of the car so there are two locating the charge for you here, you separate them from each other from the center like this and it's just on the left side, like pull up and pull towards you, it will come there, it will go off, it's nice and easy, now it does it. it has two locating lugs on the front cross member, so here's one, here's two, there are the lugs and there are holes that fit right above the license plate, so we're actually starting on the left side of the vehicle, first What's more, there is waterproof protection. lid now you just have to put your hand inside, there is no screwing, there is not much tension or pulling, it just comes off like that, okay, so let's start now, first of all, here is the

light

element itself that fits and he is the retaining pin, so the element is so just move it a little bit, not too hard so as not to break the wires, there we go and then you have the retaining clip.

Now the retaining clip goes up and to the right, so it's up and to the right now when you do it, don't get too frustrated, they may try a rip attempt, but it appears and to the right, there you go, when Take out the

bulb

, just move it a little, you don't have to screw or unscrew it, just click. a little movement and when to pay close attention to the lug, see where it is when it comes out, it's vertical from where it comes out, so again, that's how quickly you can do it once you've done it. once or twice it's literally 10 to 15 seconds or less, there you go, so it's a kid.

I bought it at a local motor factor. It's a pattern piece and costs just six pounds in the UK. You have a protective cover for your phone and you don't touch it. the lens, the glass of the actual bulb, if you do this you may damage the element inside so avoid that at all costs so you have a lug there so pay attention to where the lug is remember where you put it literally you put it in and turn it clockwise gently and when you pulled it out it was almost vertical if you remember so here we go we just offer it into the opening on the back of the head

light

so you slide it in, move it a little bit and you'll be lucky , just locate the leg, it will sit like this, then it will be a matter of re-attaching the actual retaining clips or everything backwards, so this time it's up and to the left, it doesn't open to the right to the left and They will open. just sit there and then reapply the actual lighting fixture to the two prongs and we have the waterproof protective cap and again no screwing it's just a matter of friction just put it there like that done so it's just A case.

Now let's get things sorted, so let's put the hoods back on the top left and right corners of the hood, there are two little locating lugs there, make sure they go into the channels like you did to push down or anything on the one with the retaining lugs. the front just above the number plate then just push them in and they lock neatly into place let's give it a try that's it the lights are done so that's the bulb

change

done on the

smart

one to make a cup of tea .