I Bought Woodworkings Most Dangerous Tool

So this is the sketchiest

tool

I think I've ever seen, it's the table saw and if you're not familiar, it's the Mark V workshop, the five-in-one mega woodworking machine, this thing was the wow factor. of all carpenters in 1946 when it was invented. by German Immigrant Hans Goldschmidt The goal of this

tool

was to try to make woodworking more accessible in the home than seen in the past. Woodworking tools were huge, they were hard to get, they were very expensive, and they made woodworking really difficult to get into. In the world of power tools, the intention of this tool was to put a Motorhead and have all these things attached to it to give you the capabilities of a woodworking shop and take up little space, and I love anything that makes woodworking more accessible , so it sounds amazing, but it made me think: why have I never seen anyone using this damn tool?

Why the hell do I only find this when I'm on the internet searching for tools used on Facebook? Marketplace seems to just be a place in

most

people's basements or garages and sit in a corner somewhere, so I'll get to the end of this. I did a search on Facebook and there are like five of these within four miles of the store, so I'll grab the guys and we'll crawl over to them. In someone's basement, I'm going to order one of these suckers, we'll drag it back here and I'll find out if it's the best woodworking tool in the history of mankind or if the rumors are true and it's just a death trap for everyone your fingers, okay, we're unloaded, we have two boxes with some amazing accessories for this thing that's never been opened.

I didn't want to dive too deep into them in a stranger's basement. I don't know you. guys might be more comfortable with other things, she looks pretty ridiculous if you ask me, she built this, this all says it's a Mark V, the volt model, 13 amps, 60 hertz, in the morning, this shaft is just for the assembler, this is quite funny, look at this. this is the warning label and it goes from General to table saw, drill press, disc sander and wood, it pretty much just says

dangerous

people on the mission. My favorite part is that it says: read and understand the instruction manual, just give me a month and I'll get it done. through this suction cup because this thing is huge, a little added bonus it looks like it's in good shape besides this blade here that I don't know if it's used to cut cardboard or what the heck is that thing for the table that goes up and down, that it's comical and then I think the funniest thing is why I'm

most

terrified of this table saw and why it's going to be the last thing we're going to try holding table tilts which is absurd and then you can also come here by just moving the sheet in and out for some reason my heart just tells me it's sketchy why don't we unpack a bunch of junk we have and turn on the suction cup and see how it does?

We weren't surprised to see that the woodworking power tool for everyone, the book is intact and with it, this is supposedly the dealer's gospel because we love our unboxings around here if you didn't know, sometimes you get freebies that just You didn't know what you needed, like whatever is there, she is. That thing looks new, that's the part of this tool that baffles me, it's like every time you want to use it you have to move these things like that, but it's nice. Rock with a 381.95 blade tension for this sucker in 94. it's older than Tyler, look at that, it keeps coming back to my head like I'm referencing this video we saw of this guy claiming this is the best and most durable saw of 12-inch tape on the market.

There is the strongest 11-inch band saw on the market. market today I don't know how the hell it's possible, but it looks like we have our posts here like they're supposed to be there. soft sounds very soft how do I release the tension without cutting my finger under the manual, but what if the steel? toes, I think we just put the suction cup on and then we can put it on the actual machine, we put the plate on the base, I think this is on a weird arm and then they have bolts on the inside, I think so when you roll it up still . okay, it's a bad place, it's amazing, it's scarier, it's amazing, it's pretty good, so I just need another tool here, excuse me, this is getting better by the minute, these are the traders, this is worth it so far, not all.

Getting it is the space saving part, but this is a pain, it seems like this increases the tension on the blade. I'm curious how we can make it actually work. I think we need to have a competition where the punishment is the The loser can only build with this, yes, my only tool. I'm dating this fool. What is it? No, you're kidding. It says head and accessories. Is this the axis? How the hell do we get it? Now we can turn it on if our optional accessories fit right on the end of the machine here and turn off the main unit oh you've got to be kidding me there's no way they did this and this is just plastic on plastic oh my gosh turning it how many RPM's right It only has a piece of plastic to be, I feel cheated for an hour and I can't even turn it on, you're pissing me off, does that line up with all the slots and that little piece of plastic seems to line up like that in the places it requires two people? which is supposed to be very easy for a guy, but this somehow goes to the machine here and then with this side here it lines up with it, so we have to lift this up so they are lined up, this only fits in a side. of this little thing because it only has four parts, this side has five that fit when you have five, but this doesn't fit here so we can't even turn on this suction cup right now, maybe that part will appear somewhere like in another box. but oh ho ho on the floor honey, back to business oh my god, now we have our plastic shaft.

This thing is the axis of all axis and it is the same. Why of all that is in this is this piece of plastic? Hey, okay, well, not that. not easy, how do we get this out of this stupid guy? I need to sit down, maybe take a nap, as I think building our CNC from scratch was easier than this, you don't have to surround the blade with your hand as much in a uniform plane. a job site saw well, I don't know what it's doing, but it's nothing more than doing it as far as taking care of your eyes.

I'm going to take care of mine with this incredible pair of glasses that we are working on bringing to market. For you guys, there, Matt shouldn't have done that, maybe it has to be a loose blade, yeah, that's all that happened, how much tension, okay, you're supposed to be able to adjust the wheels, you know, sometimes, when you're doing. videos for the people, you just have to cheer up and take one for the team, luckily no one got hurt in the first round so it won't be smooth in the second round, keep your chins crossed, here we go so I'm supposed to change the puzzle router.

Don't know. what RPM look at the wobble and that's at an uphill angle if we turn it down a little bit it should be level let's fix that let's see what speed because now the next thing we do is while it's running you want to change the speed. so that's the drum sander, we have the disc, we sand the jigsaw, is this considered a jigsaw? How the heck would you use a jigsaw on this? I don't know, we have to be down here, that sounds a lot better, sure, yeah, should we cut something? I don't like the power being there I don't like the power being there oh I don't like that shaft, but it actually works.

I definitely wouldn't do it. I wonder how much it costs. Now put it on the screen somewhere for what that Bandsaw Accessory Costs. I'd probably go with a four-model add-on though, so okay, next add-on. The next thing that people really like about this machine is the drill press, which gets pretty crazy, so let's give it a try, no. big deal let me take my band saw somewhere and put it away now a lot of the adaptability of this tool comes from it being the motor head and all of this is being able to move so this whole side rotates and I think like that it's like becoming a drill press, if I can remember, I think it's the first part of drill mode, the second part is it looks like a drill press, we have the divine key and this Chuck, I don't know what I'm doing.

Think about everything that's going on, this might be the brightest part, so to make the table go up and down, I'm pretty sure I just have to endure that this is how it's done, this is incredibly inconvenient, there's our drill. press launch I think this is a deep stop here she needs some lube between there this will have to work like it's our launch Max this is a smart thing like here we are at two right it stops right there I guess we're going to plug it in the cut a hole, look how big this drill is, this is a John for reference, so it's at least six feet tall in this sense, which is fine, but supposedly this is everyone's favorite tool of this thing, it's like rigid, it's good, it's not. very complicated because the motor head and the way it turns the speed adjustment I suppose it is the same dial, do we press it?

Let's go quickly, okay, let's make some holes. I hate that it's left-handed. I am right-handed. Works. I mean. I guess if you had no other choice, it would be a solid choice. I am impressed as a driller. Not bad. I'm getting more and more absurd. It's crazy how much play there is in this thing. Would you mind? like telling me how you're supposed to stay there, so that's a stop if you want to use it, you find 90 and you want to put it there because I mean it's perfectly at zero, but it doesn't stay square like this.

Honestly, that's the question I'm asking too. This won't stay on well, so take it out to lock it this way. Push it in to lock it this way. Ding ding baby, this thing won't make me poop. I don't like any of this, so first of all, a joiner is a pretty

dangerous

tool. I mean, you have the blade open, you just have to be very careful when using something like this, it's not a tool you want to fuss with too much. Guys have lost fingers to these cutter heads trying to keep them open so they can clean them.

We're missing a lot of garbage. This shaft is the scariest thing ever. I never trust a piece of plastic like this to spin at as high a speed as this thing, isn't that why most tools have covers on all the rotating parts? Yes I mean woodworking, as a general rule you know you don't wear gloves you don't want them to come loose. things you literally don't want and it's because of things like this there's a big part of me that doesn't really want to turn this on the strap isn't right what the fuck am I starting to get mad now is this supposed to happen? be like the one man wrecking crew that's on a mission from Elon Musk's planet to do amazing things and I really don't know how they could do that, let me risk my life in London, do a part in this for For the Good from the video, high-speed moving parts, blades and stuff, I would never feel comfortable taking something off the floor, putting it on this, and then having everything be exactly the same as it was before every time.

Going through this nonsense to try to line everything up to make sure it's safe and perfect and all of that is something that scares the hell out of me because of this stupid little four inch jointer, a nice piece of wood, at least I'm scared. I know there's not much that can go wrong here, at worst it's boring, all the safety precautions have been taken ready, yeah it's not that bad and I'll say why the hell it's being a very small Joiner that was quite fluid. The very, very shallow cut fence is definitely out of square again, although I think you guys have seen me adjust it to square like five times, okay, let's try this again, let's give it another scary try.

I mean, you have a nice square cut there, but I really don't like how once you go through the material, if you want to maintain pressure, you lose the fence right here, you literally start walking. I just came off the fence, I'm not a big fan of this and I think you can get it. a six inch bench for a pretty affordable Tyler, let's see what this sucker is worth for 627 for that new one from the shop, no wonder this company went bankrupt, that's an absolute atrocity. You get a six inch bench for 323 from Grizzly, which is a good price. known, I think the jet costs $750.

You can get super solid tools and a much better price. 100 is not worth it at all. We do not have the accessories we need for the lathe. We don't have the accessories we need for the album. Sander, which are two inflexible features that a lot of people like about this. Hey, look what I just found. I guess Lord and Savior Ron Swanson must have been shining on us because we just found a bunch more crap. We have several saws. blades that, by the way, seem toyou need to lock them on the shaft. I think I mentioned it before, but look, that's for the lathe, which is good because at least we can try it out and now we have the backing plate for the sander, which I literally just said we didn't have, we're going to use these bunk tools and here we have the lathe plate, so this is a pretty common bowl chalk.

I think this might be the best option if you want to get a cheap lathe, then you'll be able to find one of these, maybe you'll get some versatility. We still have hope for the table saw and by us I mean Tyler, but Tyler, I mean no one, but with that being said, you know the lathe part should work. In theory, let me, let me get this out of the fucking death assembler and the plastic dildo. I guess there I don't like to badmouth the tools because I realize how expensive they are, but man, I just can't understand telling someone to buy this, let me get a piece of what I

bought

, like a bowl in white that I just prepared here so we can give this a try, as you can see we're not going to have any supports on this side, which means I probably won't even be able to make a bowl or anything like that, but I should be able to give it a chance.

Decent opportunity to try moving parts and such nice things, I think it's a cool feature. I can move this thing, so instead of this on a normal lathe, it goes up and down like in the hole and then you tighten the hole, let's do it like this. I don't love it, a little sketch, squeeze it in there, as a general rule, we'll only be slightly above the center. I do not like that. It doesn't lock I guess to lock it I have to take this thing out. I hate that you need a second tool, okay, here we go, so lathe like when you're roughing on a lathe, that's quite the feeling. a I'm not a very good Turner, so let's slow this down.

Oh, that's slow, since it will make noise and stuff, but I'm not sure where it's coming from. It's probably a terrible choice, but this. The guy gave us some turning tools that come with shop markings. Here we get very boring for a second. I have some turning tools. I don't really know how to use them, but let's try. We have to burn this, so. Let's see if this works. It's just uncomfortable, friend. I mean, it doesn't sound good. Hey, this is what spinning sounds like. I mean, spinning is just terrifying. You don't know what you're doing.

I do, it's like I don't know we're here. Looking at it, you could definitely say it has no balls, although it's just an underpowered motor that's a decent round. And if you're a beginner like me, this is a solid setup for this, I'm going to say that "I'm not necessarily like that, oh, this is the worst. I'll give it a thumbs up on likes" if you're looking for a lathe and you find a used one, it's definitely a decent option because as long as it has everything for a lathe it's going to have a good footprint like a normal lathe and all that fun stuff, so let's clean this up Tyler and try what everyone came to see the saw. of table, so first of all, that's how you mount these blades, you literally have to put them on their own axis and each blade turns on and off with this, but it turns on, it's all based on this set screw. , so if the set screw comes loose, the fact that the blade will come off absolutely terrifies me, but I think that's the table saw you forgot a piece it's not horrible I don't know it doesn't make me feel better like that.

Put that on so I can do that I have to do this so do this I don't like having to handle the sword like that, okay? there we go so they're both on that goes up this goes up and down a little bit of lubrication there Josh Wiseman I don't really think there's such a thing as looking at Josh Wiseman too much but that's most of the time what Josh does Don't you know that inherently puts the fear of losing limbs in him? He is making it delicious. It's crazy. How much do you need this tool?

What if you lose one of these little screws? She's a little annoying. that plate, I guess I have to carry the table saw on it and then on it, boy, that's it, it's simple, it's okay and it's horrible, so I didn't make it cheap here so you guys also know that I spent. Twelve hundred dollars into this to make this video for you guys, so if you could support the channel, we have new products that I will model here and I won't even try to sell them on the Internet again. because I don't think this belongs in anyone's home shop garage unless you're looking for a shelf.

I'll put it in my dumpster, sorry Joe, it's not your fault, so this is supposedly a cool thing here, now they made this. adjustable knobs, if you look at these, they allow you to slide this plate here, supposedly it gives you more in and out, then you can also grab these telescoping legs here, use them as a stand to give you a little more gear. tell you I know where I'm going you can do the same thing on both ends I don't like it at all Tyler I don't like it I don't like this Christy wake up I'm scared I think I think this is brilliant, don't get me wrong, the concept of this is pretty brilliant.

I could totally see that it's actually not good for a lot of people, so it's like the table saw setup, more or less, it's like a really wide table. I saw the job site at this point and now I guess it's the moment of truth, let's cut something. I think you remember when I was talking about the set screw. Remember I was talking about the set screw. That's exactly what ensures that Arbor was simply spinning. in fucking hell, whatever he called one end, that set screw came loose, okay, thanks, I guarantee that's what it was, though Tyler, sure, come on, nothing's smooth, nothing's easy, let's do it all this just to check the damn Arbor.

I don't want to hear it from any of you in the comments who like it, think this tool is good for beginners or have used one and are good at it, like this isn't a tool. I would recommend it to anyone who is not familiar with how the tools work. If you are not familiar with using the tools. I would never do it. I'm going to give this firmly. No, there are too many variables. Most beginners will do what I do. just turn that sucker on, they're not going to know that the Arbor is loose and they're going to go and try to cut something and, um, they're just going to think that the Blade is stopping and they're going to get hurt and we don't want that.

I don't want people to get hurt, so this is what I don't like. There's a screw, all I can do is tighten it. I have no choice, guys, you shouldn't be so difficult. see if the set screw problem stops, you hear that vibration. I don't like that vibration, the vibration is off man, but the saw blade came down and stopped, so it was definitely spinning around the tree, still scary. Okay, one cut, everyone knows the rules, super cute. worked well I don't like some of the other features that I'm not going to risk my finger showing you is that this tool prides itself on versatility with respect to this board here and that's why you can adjust the angle of the saw and then because of that the saw blades can move, you can literally do something crazy like this and bring it here so it's centered, lock it and then what these crazy people do in the video is they take this, which is like you have to have this to be able to use this tool bring this here hold it like this and then run it across the blade I don't know Tyler, you feel amazing with compound miters here.

I'm like they made a fucking compound miter saw that's so It's so much easier this, whatever it is, it's literally one of the most dangerous cuts I've ever made, it's literally hard to tell when you turn the saw on, but it's a miter cut. compound on a table saw that normally can't be done. I don't even want to do it. Do that, like, screw it, if you lose this, you're screwed, don't buy this tool if you want it for a lathe, cool, maybe a backup drill, cool, everything else, don't suggest, don't waste your money. You better buy new stuff on Facebook Marketplace if you have another crazy tool like this link below maybe I'll find one maybe I'll buy one maybe I'll try one and let me know what we're going to build next.