Hilux 2013 a 2015 sem funcionar teste dos bicos

Today I would like to give you some advice: how are you going to be able to test the SW mouthpieces from

2013

to

2015

, even if you don't have a Scan, do you have enough? This is the advice I'm going to give you. You will be able to do the nozzle test even without this esas, okay guys, so the procedure is easy, any customer, any mechanic, will be able to do this test, so I will pass it, okay, the first one. The step is, you are going to remove this cover, we are going to be here five screws with a 10 wrench, right?

I left it loose here the second step is to loosen the intercule types to loosen the intercule there are four screws. a 12 wrench Loosen this clamp here from the throttle body and loosen the other clamp here from the turbine guys or Then loosen these screws and these clamps lift the turbine part here and pull here Pull here and it comes out guys, okay , you guys I won't have much difficulty changing it now, how will you be able to do this? Guys, let's say your car won't start, right? These nozzles, these whip nozzles cause a lot of problems here in This is where water gets in through the seals, right, and the advice I would also like to leave you with is don't wash this engine, guys, wouldn't that be good?

There are people who are putting silicone on it to help with the seal. but the most important thing is that it was fine. Don't wash it, right? Because water with electronics doesn't work, so what is the personal test if the car doesn't start and you suspect the nozzle, now what would it be? So the first step is to disconnect the nozzle, the connector. I will turn on the mouthpiece or send someone to turn it on. If the car starts to start, the TR cylinders will fail, but this means that this. The first nozzle is defective, so now if I turn it off here, the car won't start either, which is the first nozzle, ok.

And I can do this test in the second, third, fourth and so on doing this test. I know which nozzle is defective so I can do this test without a scanner without the tracker. Okay guys, what's the important tip? On these vehicles, some people with the car running keep turning the nozzle off here and turning it on if I do. Do this guys, it might burn this mainframe and this mainframe is very expensive. The nozzles on this car are already expensive and this head unit is even more expensive so it doesn't work and they keep turning the nozzle on and off, nope.

No way do that, okay guys, so this way it's a simple and practical test and then you can detect which nozzle is defective in your vehicle, okay? Guys, here is a tip for Hilux

2013

to

2015

, okay guys, I hope you liked it. the advice and you can give your opinions on youtube on instagram and on youtube you can leave a like you can subscribe and if you want us to make a video of someone's car from a truck, any defect, give us advice, okay guys, a big hug until the next video