1/5 Scale Monster Truck RC Size Comparison

What's up guys, welcome back to Steel City RC. This is G Man. I'm just going to do a little

monster

truck

comparison

video. In fact, I have every

monster

truck

I own. They are all fixed on the ground, that is almost a feat. That never happens, but I figure I'll show it to you real quick, let's go out there, alright guys, we've got the mtxl loci, as you can see, it's a big beast. I have it next to the rampage mt which was the second biggest monster truck made a few years ago, I hope the lighting is okay because the sun is pretty bright and then next to it we have the trusty x-maxx, okay , take a look at the length here with just the overall width of this thing, this monster truck is huge.

Now don't get me wrong, it's not a promotion or a raminator, I get it, but this thing is big, it's got Fastlane arms and stuff, let's look at five piece shocks, some orange Lizzy springs there all the way around, but there's Rampage. Just look at the tires, these aren't the original tires, in fact, they have the original ones in the garage over there, but I'll show you that they're pretty close in

size

to the X-Max, right? I think the wheelbase is a little longer on the ramp, but not by much. We have a seven pound difference between the two of us.

This one measures 32. I think this one weighed like 26. So check it out. I put the orange HD and stuff on this one. pink, uh, the heaviest spring they have, let's see or excuse me, the Traxxas offerings make it ride pretty well, you know, let's open the covers on these two here to see what we have now, we have three different configurations, obviously, the jack red one wants a legacy, but As you can see, it's a long chassis. Very long tests. It's wide like a nice wide chassis. I just wish it was a little more driveline focused.

See that angle you come in at. What I did was power. Have this bracket go down a little bit by notching the chassis that fits that original 60 with a 68 267, but removed the spacers underneath, at least the Signature series g340 motor there, then the whole 990 map pipe, brother of wall, and we got the commotion. one has an oil mat tube also from 990 carburetors, except this one is 32cc instead of 34. um, there's a special ported head there, it's the race ported one, he put it on, uh, there's a os z g320 motor at the bottom end, a couple of good servos, yes there. that's wild for the throttle brake and then the electronics for the steering duties, a pair of high tech d845's in there for the steering which was a fun little setup to hook up the 845 to break stuff in there too but actually It doesn't need a servo that much, but overall I want to say this is my favorite truck, I'm not going to lie, this thing is a blast, let's see the

size

of the body difference, man, it's like a toilet, so it's okay.

Guys, this truck is fun, it looks like the preload is pretty good, what are you waiting for? So you guys think, man, this thing here is a beast, this truck is a beast, what's so funny, let's get something here real quick, I'll bring it, uh, bluefin tuna over there. just show him how big this thing is this buggy is big that thing i mean look at the wheelbase basically the same as the uh mtxl and if you line it up the uh redcat dune runner is the same length really yeah , is the way. it's sitting right now and i measured it one day and the low c5t is the same length as the dune racer it's a big buggy it's long super wide as you can see but it's long no engine there stuff like that jet pipe pro, yes.

Well, okay, this is the different size of the fifth

scale

s that I have. I have a 5t. I think I could have shown you that too, but I wanted to show you the monster trucks today. Okay, we have the um. Put some light on. On the subject of my or my 8 outcasts, I just stoked it, I just have to put two more screws on the fan and it's ready to go with the 2028 motor, so it's ready to go. I've been soaking the arms with wd- 40 doing the old school trick let's see if it works I don't know I keep breaking arms guys I don't know what's going on here um the lower ones keep breaking their front forearms so I don't know I hope the wd work beautiful day I think I'm going to take one of these results from one or two of these guys and see if we can go down a little bit okay guys those are my monster trucks.

I appreciate you stopping by to watch my videos, thank you.