DOLLAR TREE DIYs || High End FAUX LEATHER Home Decor Hacks You’ve Got To See To Believe…

foreign azzlers welcome back to my channel as always I hope you are safe and doing well in today's video. I'm sharing with you two simple yet elegant

home

decor

DIYs using

faux

leather

that I purchased from Dollar Tree. I started by gluing two pieces together. of the

leather

with a foreign strong adhesive I let the glue harden for about 20 minutes and then I cut off the excess fabric, then I added some of this gold metallic tape that I already had at

home

foreign pieces of the white synthetic leather 20 minutes then I glued my pieces inside out, I left one side open and let it dry overnight.

The next day, I carefully turned my design right side out. I then placed an old 18 inch pillow inside before sealing the remaining side with hot glue. The outer cover was a little big so I ended up cutting out some of this fabric and re-sealing it, but when I was done I had something that looked like this for project number two. I'm using two more pieces of black

faux

leather two. wood pieces and two faux wood frames, all from Dollar Tree. Thank you. I used a strong adhesive and hot glue to join the four pieces of wood and faux wood.

The wood pieces are a little longer than the faux wood frames, about 12 inches. but I'll show you how I take care of this a little later in the exterior project. Next I used the particle board for one of the frames to cover the top and bottom of my exterior exterior design. I need to add some weight to keep my design from falling over, so I'm adding some of these Dollar Tree Tower wood pieces to the front and back of my design with Dollar Tree plastic cutting mats. You can also use any type of boards, including foam ones.

I'm just using what I already have on hand thanks below. I covered my design with two pieces of black faux leather. You can add the leather a few different ways, but this method worked best for me. The most important thing is that the corners are smooth and that the leather is pulled. together as tight as possible foreigner thank you foreigner foreigner my original plan was to add some tape along the seams but I decided to cover these sides completely with leftover pieces of faux leather. I would prefer these seams to be visible along the corners and I really wanted to keep this design all black.

Here's a tip: once you cut the leather, if the white fibers on the back are very visible, you can burn the ends to get a very clean finish. I started working on my lampshade instead of making a lampshade. I thought about it. It was easier and less expensive to just buy one, you can get one at a thrift store, a small one from Five. Below, this one came from Target. I think I paid about ten

dollar

s for it and I really love the square design. I have already used this one. lampshade before, so you already have a Dollar Tree napkin holder in the center.

Here I am adding two additional rings to get the height I need. I'm also adding some rhinestones to give my modern design a touch of glamor to hold the screen. You will want to cut a hole in the top of the leather so you can attach the napkin rings directly to the particle board. I also added more hot glue inside the napkin rings to help keep the display in place. I placed two. remote controlled LED lights from Five Below on top of my lampshade and here is the finished look. I'm very happy with the outcome of both projects, they were easy and fun to make and fit in with the rest of my modern Glam

decor

.

Guys, let me know in the comments as always. I would love to hear from you. I hope you enjoyed this week's video. If so, be sure to like, comment, share and subscribe. Thank you all so much for watching and until next time, dazzlers, bye.