Zurück - mit TRAXXAS RAPTOR ! - Darconizer RC

hello and welcome to kaiser s ii, it's been a long time since punch time but here we are in the new studio 4.0 and that means there are a few videos from time to time, let's start with this very briefly before moving on. speaking of what you say here, yes, it has been a lot of time reading or you and without them and so on and so on, why won't I go into that more because honestly many of you have declared me dead, many of you. You thought, man, what happened was in a coma, no, I'm fine, everything is fine, it doesn't matter what the exact reason is, that's my private life and I separate it here from YouTube, but in any case, there.

There are some videos in preparation. Something will appear again, probably not as regularly as in previous times, when I sometimes post something at least every two weeks or so. Every other weekend, sometimes even every weekend, has different reasons. I have many new hobbies, maybe I'll leave them to you soon. I also want to participate a little in them, but modeling is no longer as important a presence as it was for me a few years ago. However, I have decided to do something again now. I don't know how many new models there are now, so I have to buy it in advance, but I hope it's still interesting.

The next three four five videos are in the planning, they will come in the next few weeks, but right now I'm not sure if in three days or in two weeks or in three weeks, I don't know, it's just not good in the first place, in any case , there will be a little bit of something to come, so what's here here are my tractor rides is

raptor

, the

raptor

is actually Lily's or not, of course, it's actually Rudi's, you with me, so here, often, it is an idea that is a track with a real The matte cage on top of it is just a small one again and I would also like to present it to you and yes, I know I have already made several videos on the track, but guys, it is and remains my favorite car and See it here again with a completely new look, there are always new things and well, even if the market is old and I have already made videos about how it is bad, the market is always like that.

It's still a current model that you can buy a new one in all model stores everywhere, so you can still get it everywhere, it's on eBay, it's on Amazon at Modellbau Bochum at Modellbau Berlinski Conrad Electronics everywhere you can get the eighth. It's anything but up to date or something and that's a good reason. In my opinion because it is still a great car. That's what I've done here. I'll bring the camera a little closer and then I'll show you the gem I'm giving you. But just a little bit of energy here, so you can see what nice lighting I've added here and then I'll briefly explain what it is and explain something about the conversion, but maybe also briefly explain something about it / what it is. underneath it really happened to him because I also tuned in now, but first here you can see a little bit from all sides with light and lighting, everything, so it's a really cool salary report, I think the part is really cool, yeah, and how they say, everything is just the director's structure.

The Raptor is a relatively current 11 to 8 model, so it currently costs 379 euros at Conrad Electronics or Völkner and of course you can also get any other model at dealers and of course not only in the store, but also on Amazon and eBay. It is Konrad then the seller in any case 379 euros the main one really costs if it is from Reese then 1 6 s 1 to eight brushless says waterproof and everything is all-wheel drive and cuts in all the reviews I have, I have seen it quite well, which By the way, it is another sign of this.

Life is pretty good now, but in terms of size you can see that it 100% fits on what used to be a tenner, because short haul trucks are always a little bit bigger than anything else. truck One in ten of the once bad ten is as big as a roller coaster, so it fits perfectly even in terms of width, the cage fits almost exactly on the base plate of the / which has been pushed in a little outward on each side by a centimeter, but what if, it doesn't bother you, otherwise the wheelbase fits perfectly to everyone and to make everything look great, I shortened the defective bumper in the front, in the back The rear was normal and bad.

On it, here it's almost flush with the cage and I've got some fancy wheels from Luise. It's always fun to do, but Luise is this company that has gotten pretty big in the last few years for all kinds of rescuers for a counter and 1 to eight and the photos are really great, they look like blogs because of how many screws there are. The rims can also do something and they look great with the white letters and the silver screws, they really look great and together with this one with the cage it has a quite military look, which by the way at Konrad costs 34 95 plus shipping costs, for supposed.

Then there are also these little fire extinguishers and, in fact, up here too there are so many charcoal burners that come on top. The wheels cost 19 euros. 90 in a pack of 2. That's almost 40 euros for the wheels. It's quite expensive. It just looks great. That has an enormous cost. Of course, it's not that cool and otherwise the light you just saw here is also ordered along with the other stuff from Conrad Electronics and that's predictable, if you enter predictable LED, you'll find this lamp with round lamps. There is also one with real lamps and the lamp itself with the housings, that is, with the lamp housings and the LEDs with connection.

The costs can be six euros 90. Normally, of course, they actually come on top, but I don't feel like tearing out the lamps at the first rollover. I always cry and how everything is built here and how it fits together. wrong I'll show you now without you but a little bit of who here and like I just said the lamps are up and these are body parts The plastic plates are screwed in here anyway through these pre-made holes and now I'm just screwing the screw from the outside on the lamp is placed in the place where the lamp is normally fixed, that is, the screw that normally only holds the plastic sheets now also holds the lamp and the same here on the front, you can see that here are usually the holes where the screw goes through to keep the plastic in place and now there are the different sized silver lamps on the front that are a little smaller than the ones up here.

Then I didn't feel like spending. Another 35 euros to get the plastic panels, which of course I made myself and cut some blister packs from some Lexan body into cut parts or I usually buy a piece of light sheet, which are these things for plexiglass windows, at the hardware store there . It costs 10 euros per square meter and this time the whole thing is not painted, but simply covered with a black sheet and screwed inside and then it has a value of zero to two euros for me. Somehow I get these plastic panels built here. because fully open it obviously looks like shit.

I can look here again but I don't see the point of paying 40 euros or something like that to get these plates, so you can see maybe because you looked closely and maybe you noticed it. Here Generally the supports are where they are. The original cage on the track already says that with the raptor sitting in it and now you can usually fix something like that if it's not on the model, with the holes in the front it's very easy. the front I just made holes in the perforated plastic plate where the sprint goes through on the back of the struts I simply have a piece of hole band a sterling hole band or wooden connector or whatever it's called at the hardware store these are just these longer metal these here what there these things here you know they're like this Long, you can cut them to size, they're rolled up and you can make them as long as you want.

I covered them here with black soli tape so they're black and then just here with this screw, which is usually also from the outside or the inside. The plastic plate now holds the perforated band strip here at the same time. It also has a screw for various things that goes in here and holds this strip because this hole in the back is exactly the same height as here from / the body support of That's why it's appropriate that this screw is used, which actually holds the plate, to fix also the hole on the belt and the treadmill the twist simply goes with two holes and on the normal pin exactly on the / bracket and that's how everything is built.

It's not a problem at all and you can remove it here with the pins like any other normal expensive and then the This was completely removed of course now we hang the cables from the lighting so this is what it all looks like and you can see it again. A piece like this, this is the hole mate, this is what it looks like, I also put this here on the front, it just gives a little bit of stability in two ways. On the one hand, the two body supports cannot be folded here, and on the other hand, of course, if you have a larger support, if you are doing any type of body, you can always put it underneath here and there.

First of all, it doesn't bend like that, and on the other hand, of course, the pins here don't press through the leaks. As fast as the body because yes, the circulation has increased so much because of that, so much on the slopes is Rektor, first of all, it just sucks, actually build, get the cage for 35 euros, makes it look stylish, use it too / and you have a genius. car, so now just a little bit, what about June? Several years ago I made a video about what makes sense in terms of metal tuning, that is, what parts can be made of aluminum and now I will show you something again because I am here with the surfaces practically one by one.

I implemented the advice. What did the hat get? Not for stability but for heat. Got a different gearbox which at least has the motor plate made of metal with four additional heatsinks. and the engine is still open during the Original, yes, about this far it has plastic on top, almost the entire engine is completely open and can cool better than it has from one to eight shock absorbers in the rear and in the front of the Riel van II. It has two shock absorbers on each side, these are the U1 landscape shock absorbers like. For example, they are installed with carbon plus 110 or in June, they are usually a little soft, which is why you have two pieces here, it looks great. it does what it is, martial in a way and then it works perfectly, everything is really easy to implement, you just do it up here The screw and the screw at the bottom are long enough and a spacer is placed between them.

A thick ratchet with "A buyer sits here. The middle ball joint fits perfectly. You can see that they are perfectly parallel and they look great and are very elastic. Great, otherwise he got an aluminum shoulder and a shock absorber bridge of aluminum in the front as well as a The aluminum steering and steering bracket and steering lever are made of aluminum, as well as the rear wheel brackets are made of aluminum and that is actually what makes it "The rear shock is made of aluminum. I wouldn't mind the bridge and the forks, that's not it. "It doesn't make much sense.

Instead, you make much better use of the forks, as happened here. It has rpm forks on the front and rear, that's cool. Yeah, that's basically the tuning that's on the car now. Otherwise, of course. Of course, it looks a little different. Maybe some people have already realized that it always makes sense. In any case, you have the gearbox cover back here. As standard, there is a stupid slot at the bottom that needs to be taped with black electrical tape or here it is now like this. I also bought the rev gearbox for seven euros 90, that is to say the cover, then it leaks too much and it will no longer fly down there, otherwise, As I said, you can also use black to glue everything and to make the cage fit and also the car decoys, it also has a black base plate that is available in black in original tracks and not just in gray as is normally standard, so now there is a different branch, there is a combo because I simply had left over and now there is a hobby there at the moment like the 150 hp regulator, of course, a little violent, I say from 1 to 8 But it does nothing and there is a small engine there like the one on the father 110.

Actually, at the moment I only drive the car on 21 due to the motor, but still runs fine. Yes, I can show you that, I have the spark, I lowered it here and it still has enough power, as we will see now, because I can simply use the larger soft wheels and the corresponding gear ratio. Ok, I will show you, I hope you can see something right now and if something has happened, it wouldn't hurt to turn it on, so that's enough, it's definitely enough for now with the car, risk of injury. "It's definitely fun. I think the car is cool, so the fans are cool again, this is something new in the industry and yeah, I would say we'll see each other at the beginning of the video."