Better Than A Turbo Hayabusa Swapped Smart Car?! EP.7 The DREAM TEAM Surrounded By Magicians

passing by, he has that positive attitude and everything is fine, where is there a smile? and no matter what good, we were all along for the ride too. Quick and willing, we just have to keep walking, so oh yeah, you have to worry about that, man, awesome, you'll always figure out how you're supposed to do it. Words of wisdom. I love it, it's definitely a pleasure to work with this guy. Yeah, in the meantime, I got distracted and we've got our four holes in our thermostat, so we're ready to rock Osia. Prove it, hey Brent, you want to hear the most annoying sound in the world.

I'm always fascinated by how Ben solves this, so he's building this bracket right here and he's going to have a p1 right there. I love the way he does the reliefs and makes it work. it's so nice to have to do what you have to do and he's good at it so these are tie rod mounts and we're trying to eliminate any kind of steering of shock locating them as centrally as possible, as far away as possible. I like what we have. going on here is largely what dad would mention, maybe not many people really remember that, oh yeah, I like it, I like it, we have to have some kind of similar colors, you know, maybe we can warm it up.

I definitely can. You don't just have that like that, well, you have to give it a little color, heat it with a blowtorch, yeah, I'm a little thick with that, you're so harsh, it's a little bit on the same note, a friend of mine. This was years ago, okay, I admit I had some richer tendencies. My first hot rod car was a 1985 Corvette and I bought it in 2000, and my friend, who had owned a Super Street magazine, said, "Hey, man, you want to tilt the taillights." and I was like, well yeah, but he's like, hey man, I'm just going to go to the store and grab some paint, so there's black cameos, you wrap the taillights, so yeah, I did it, did you? will you bring back?

No I'm not bringing it back, grab the taillights and black pantyhose, well apparently it was a thing because it was fun, super street, magnetic Friday, yeah it worked, people were like a rack up and touching it and I was wondering : what is that guy? Yes, you are like killing, covering, it is strangely comfortable. It's hard to get parts, it's hard, we talked about the

turbo

smart

and those guys have helped us a lot in the past and we really appreciate their stuff, however we can't get it right now so we took this layoff this year, man. and you made a beautiful weld on that, my dad glued it together very, very well, so we had to weld between shots, let there we're going to put a V ban on top of that because we can't cut our two bolt flange. taking off the ears that makes it all really nice and pretty so if we can't feed the tube that would be the problem yeah so it's right on the yeah we have to crimp it and have a kind of being.

Vance can continue. here you would say heat it up and beat it sure, he's fine or beat it, eat it, he'll be dead, no, I think Ben is, I think he's nailed. I had a vision and I believe this will do it, so let's get our door on track. Just like that, I think that's going to be pretty bad. I'm excited for a note we can follow, although it's probably okay, a spot placed intelligently and precisely will be a win, just give it a little, this is going to be amazing now. I understand yes, so since we don't have the two bolt flange to shoot, we go ahead and use the factory filler neck and just cut it off and then reshape it, they will fit in there and then that cover there is a There is still a cover of sheet metal covering all these hoses temporarily, we're going to get something that probably feels classified or whatever, but that's it, yeah, I mean, it looks pretty good, so all the electrical is pretty much done, we have a wire in the White. band but it's ready, it's ready, we also have all the little things, but no, we wanted to choose a place for the broadband, which is incredibly important, there was talk of mounting it backwards and, in fact, moisture accumulates in the escape and kill a sensor quickly so that was really interesting to me and the fact that I was thinking about mounting it down in terms of words and yeah so I can kill it so guys there's our down tube and we have a place right here now, something else.

What I wanted to say about this is that you know you really have a pretty short tube and at lower engine speeds it probably won't be as accurate, yeah, yeah, but you can know that you've tuned long enough to feel those things. and you know it's not 18 to 1, we have this clean Rev here, you know, we know it sounds like at lower engine speeds you're not moving the exhaust gas volume down and you're getting atmosphere going back into the exhaust. and you're having that reversal and at lower engine speeds that's more likely to happen, however, probably 4,000 or so, it's a different story by removing 4,000 rpm of air going through there, we should have a pretty accurate result, right?

You know? Vision is probably even less than that probably like you know about 2500 if we had a full exhaust system that wouldn't be a problem maybe not a problem yeah so when you have it we like to deal with enough tubing, which we do and a Many times what I've seen with factory O2 sensors, so guys, if you're running open headers like a little bit before on the CTSV, we had this thing running open headers for just a second if the pipes are less than three feet long from the O2 sensor point many times you will see that reversal at idle and it will start to scare the O2 and the Carl runs rough and then you may have to run an open circuit, which it's, you know, a fuel no right, no, so let's see what the lies are doing here working on the clutch there and the clutch lines happening.

I have one of these in a - twist your pocket oh no, I don't think your heads will open just a little bit. For longer we're going to need a like right there hmm, so we need to make a 90 degree angle, yeah, not much space at all. I wish you would run, he already has this end, he just laid it out and ran it, looks good man. We still have a lot to sort out, we have a lot of things that prevent us from turning it on, but we are very close, but I promise we need a few more hours.

Here is the problem. The county just implemented a curfew and we have to be home by a certain time. I know we've been pushing the boundaries on some things here, but we have to be home and unfortunately we have to cut it off before you guys have seen us. working night after night video after video and unfortunately that's just what we have to do, however we promise that in the next episode we will have this up and running and it will be amazing, we are so close, I mean, you can do it, you definitely blow it up, But I want to hear this rib and I want to see some fireballs, bro, I know you can do it, believe it or not.

This will still take hours to get right. It probably took me four hours to do it. get over here and weld that one last time and he's building the tailgate right now oh there's some time and this is the other B band that's going to our tailpipe so it's just going to clear on that plane, Yes, we didn't have any. flanges, so I wasn't about to start and I knew some stainless steel flanges that we could buy, you know, a couple of dollars and four hours to make the pans, there are pickups, work adapting and surpassing, let's see how we get here.

I guess we are sinuous. We come down here to spend the night and we have to stop, unfortunately, we really want to continue because you guys know that's what we normally do, but hey, Emilio was asked, tell me what you think buddy, isn't this the first time you've seen us? ? I even liked hugging you, I thought, wait, do you have all your cake cuts ready to go? Hmm, this thing is such a green setup, we need something like this right here, people to cross all that crap off the list before we go and do something. stupid and possibly losing a tire and having it happen to us, hey, we've had that happen to us before, that looks so good, I'm so proud of you, that looks amazing, yeah, that's really nice and subtle, I guess to frame it all and everything clean and Jorge painted that right there, we cleaned our axle.

Thanks friend, what degree of angle did you have in a joker? Well, first, yeah, look, I was trying to get all the science with that and stuff, and I was going. like 30 degrees 20 degrees 30 degrees 20 degrees 30 degrees 23 yeah I followed a little bit of this and a little bit of that 30 degrees 20 degrees 30 degrees yeah that looks amazing this is going to oh god man I can't wait. Don't wait, the reality is that our sword was smoked in the lands there, so I have a board of and you just know you just did it, oh, I hope I understand that, hey, you planned for that guy to be all in a day's work , OK?

I'm tomorrow is the day tomorrow is the day so guys thank you for tuning in to this whole building tour so incredibly amazing it's a pleasure to work with this guy and honestly the rest of these guys here I mean they're really really

smart

. What they do has been an absolute pleasure and hey, look, I'm throwing it at you. This guy is choosing the song. Oh man, I chose her. I choose, oh my goodness, banquet, goodbye, block party, thanks to my block park, crispy, buttery, flaky crust. Alright guys, oh man, God bless you guys, have a great night and well, don't wait, let's shoot, you know what I forgot?

I was going to recommend stock here guys, take it, you need to breathe, wash with the water. I send it to you. I like everyone here from the road to here, so it's like a good inspiration, amazing, amazing song, very cool, God bless you, see you in the next episode.