YTread Logo
YTread Logo

DIY Baby Shower Shaker / Rattle Gift Topper Assembly Tutorial | Cricut Crafts |The Useless Crafter

Mar 07, 2024
foam tape are on and pushed down so that it goes in the middle, this dome will go over the top, so you'll see how the circle is a little bit bigger than the dome because that will allow us to put our hot glue gun around it to seal everything up. the content inside that we haven't added yet, but I want to show you on the side, see how the dome goes all the way, here our name goes all the way to about halfway, so any confetti that has We put it in there, we don't want to overload it, we want enough so you can still see the name, but the name is, you can see how thick it is, we've added it there so the name is always visible.
diy baby shower shaker rattle gift topper assembly tutorial cricut crafts the useless crafter
Alright, now what we're going to do is add our confetti mix and last time when I added this I added too much and I put the name in and I realized that so I had to put some back. there so you can always try it first, so let's leave this. Oh, that's perfect. We could add a little more. I'm going to add just a little bit, just a dash. Okay, so I'll leave that aside. I'm going to move this so my powder doesn't look so messy, okay, so I'm going to leave this, let's double check, yeah, it's perfect, okay, so I'm going to leave this, make sure there's enough room for everyone . around and then I'm going to hold it like this so I use glossy cardstock to make it a little bit stiffer and you know it's easier for me to hold it to keep it in place so I'm going to make a line right here.
diy baby shower shaker rattle gift topper assembly tutorial cricut crafts the useless crafter

More Interesting Facts About,

diy baby shower shaker rattle gift topper assembly tutorial cricut crafts the useless crafter...

So I'm going to take my glue gun and not worry about the mess because part of the design is we have something that covers that part so don't worry I got you good so I left it. I'm going to rotate this slowly, I don't want to burn myself either, so my paper came apart a little bit and there's a little bit of glue inside, but that's okay and I've almost got it complete, okay, perfect, so it's all the way in, you can hear it, it's so cute and stinky right it's as cute as it is before we do anything to it okay so I'm just going to let it dry for a second let's start putting this thing together so this is the um you know what it is. all about that the scrolling um I did the design space

tutorial

yesterday it's going to be posted today and then this is going to be posted the next day um but it was a super easy layout everything is like an element and then it scrolls to the right like the name, the name with the scroll and then five times to the right and then it's just a circle, same with this the heart frame and then a scroll and a scroll, that's it, so this is big enough like so we can put foam tape anywhere there is a heart.
diy baby shower shaker rattle gift topper assembly tutorial cricut crafts the useless crafter
I'm going to put in a little square of foam, you just know, I'm just layering and adding depth to this piece, even though there's already a lot of it because of the dome itself. I'm going to put one more here, I have some. a little bit of the glue gun, um, so I have another one that I'm going to be working on and it's going to be a water theme, so we're going to do the same thing but with a water theme, so it's going to be a It's also a lot of fun. , okay with the foam squares, you always want to push down on any similar adhesive, the way it anchors is with pressure, so you want to make sure that the foam table and the foam squares bounce back, but we're turning it on.
diy baby shower shaker rattle gift topper assembly tutorial cricut crafts the useless crafter
I forgot to put some glue in, so this is where this little tip comes in handy. I'm going to squeeze in the middle and add a little bit of glue just to make sure this stays and dries. and you know, you don't know from my off the map projects and stuff like that, I don't like using glue, I prefer to use tape because I find it's easier for me, I'm super messy like that right now, but I want to take this off and then I'll go to close it, okay, so this is down. Look now, let's look at this dome, so now this dome is completely safe.
I love the sound and, um, it's so stinky and cute that it comes in. like so, so we're just going to glue this on and then remember well our glue, first of all, a lot of it is a little bit covered, you know, by the design, but we're going to glue this on and this goes over the dome and it sits like it doesn't. if it fell off at all, it sits on top, so I'll show you what it looks like from the side so you don't see there's not enough room for you to actually see the glue and that's where we are.
We're almost done, we have this and then we're going to glue the sticks together, it's very easy, okay, so let's do this one thing at a time, let's put glue on this thing to make sure of that and I put a lot of it. of glue I made the first time too, I don't know where I think this is going or who's shaking it, it needs so much glue, but it's what's fine, make sure your name is right side up, so I put it right, this what happens is that I'm going to leave it like this and then I'm going to use the barely artistic glue because I want it to be clear and I'm just going to glue it in place a little bit It doesn't need to be a lot, but I don't want it to be fall, so I'm going to put it very close to the edge of the paper and the circle, so I put a little bit right there. so that when it dries, it will hold it in place, I'll push it down a little bit more here and I'll do the same thing here and I'm almost wondering if I should really put, you know, what maybe if I put a little dot of glue that It could actually be really good, so give me a second, where are all my glue dots?
Oh my gosh, I have it somewhere, oh, these, so I'll take one of these zot singles, I'll take one out and I take out like six, okay, so with these little ones you can roll them up a little bit, they're super super sticky and I I'm going to glue it on the back and that way this little ring is. I'm not going anywhere I'm going to do two I'm going to do one on each side and I think we're good then so I rolled it up and then I'm going to glue it on this side and I just have a little bit of um like you know the strings of glue or whatever you want to call them, okay, I'll do it, let's see, I can see this one is stuck.
I'm going to do one more of these and then I'm going to get really comfortable and then make the straws and then we're done so here we go I'm going to take one more uh let's just do four then we're going to do like each quadrant okay here we go up, so let's see, I have one right there. right there, so one has to be over here, okay, and then one more at the top, there we have it, I like it very nice, okay, so my original design because it was on a

gift

wrapper, a

gift

, and this is a little thick. and I wanted them to be able to keep this in their room if they wanted, so I picked out three straws, so these are on Amazon, they're in my store.
I love this. I used this recently for what is called the bride.

shower

so you could do something like this like two gold ones on the side or in this case I actually like pink more so maybe I'll do these two like this and then one gold one like this so the way I did it originally the golden one was in the middle and then these two were a little bit longer like this on the side so the first one is to put this one straight like this and I always use this as a way to figure out where you know where the straight line is so I'll hold it like this, I'll put glue on it and I'll turn it over at this point, oh holy, that light was so off, okay, wow, how did I get like this?
Other than that, okay, so I'm going to do this, oh, that was so bad, don't mind me, holy, that was so bad, okay, so I want it like this. Okay, I'll let it dry a little. I'm going to turn around. looks and it's still moving so you just want to make sure it's lined up the way you want and then I'll add more because I need this to be super stable and don't worry just add a pink circle on the back to hide everything this glue right here, so now what's really important is that we make sure that this straw is straight like we want, once it's lined up, the other two will be easy, right? we'll turn this over, we'll line it up like this and then these two will line up in a line, you know, okay, I'll let this cool down for a minute, okay, so I'll close and move.
Other than this, let's do some cleaning because I'm very messy these days. Okay, and don't forget the comments, the questions, please let me know what you think or if you need me to do something again. I'm always open. to that, okay, so this is down and look, it's so nice, it's so nice, okay, so we're going to put these two and I'm lining this up, okay, that looks good to me and then I'm going to align this one like go. Okay, okay, so let's put some glue on and I'm really making sure that this is stable because from experience at the bachelorette party, the bachelorette brunch, everyone wants to shake it up a little bit, so we really want to make sure everything stays. put it on and nothing falls apart it's too pretty to fall apart okay we could just put it because you can do the exact same thing you know flip it over so the shiny side of the glitter is facing up if you wanted to do that or You could just do this for now so I'm going to put this on top just to hide everything because everything is very sticky, okay, and on this you could even write a note or a date or something like that and then what I like about this.
Should I have made sure it stayed in the gift? I took the ribbon and, you know, I wrapped it in and out of the straws to really hold this in place and it was so cute and stinky, but there you go. Absolutely and this is just one of my favorite projects, it's so cute. I'll see you next time, bye and I just need to turn it off, don't mind me, bye guys.

If you have any copyright issue, please Contact