YTread Logo
YTread Logo

GIPro X-Type G2 gear indicator install on a Suzuki GS500 - on road

Mar 26, 2024
Well, here I am setting up or configuring the

gear

indicator

ignition, count to six because it's already set. I do a long tap to enter the menu and then do short taps to go down to d which resets it. scratch, long tap again to select it, you refresh straight into learning mode, count from six to one, it sits there on the screen, says I'm ready, it'll start learning, I put on the gloves, start this slow and then it starts flashing and it is learning idle once it has learned idle speed which is around 1200 it goes to one it says ok it's time to select first

gear

check shoulder I'm going to first gear take it at 5000 rpm because I normally don't shift low enough. ok so it goes to n, it says I have learned to shift into first gear, shift into second gear, do 5000 again and keep repeating that when I shifted into third gear and it tells me how to shift into fourth gear etc. and that's all now.
gipro x type g2 gear indicator install on a suzuki gs500   on road
I tested it at three thousand and I tested it at five thousand and I think the sweet spot is four thousand. Your mileage may vary, but that's what seems to work for me because after I've done all this, I try it. I know I'll go change gears, go down two gears, go up one gear, go down three gears, go up one gear, and generally just goof around and it doesn't seem to work properly unless I do it at four thousand. Okay, that was a short clip of me setting the key shift

indicator

at the end, the best way to do it I've found is to take it to 4000 rpm for each care.
gipro x type g2 gear indicator install on a suzuki gs500   on road

More Interesting Facts About,

gipro x type g2 gear indicator install on a suzuki gs500 on road...

I've tried everything, so I tried all three. I tried. a five that was in the video, but I found out that four is best and I also set the filter to six. I think otherwise it doesn't seem to register the gear change correctly anyway, so we'll just take a look at it. The first thing you do is long press to bring it up and then you can do a short process just to change the menu items, so if you go down to f and select it again by long pressing, you'll be able to see i've set it to six, if you want to change it , just short press, I'll leave it at six and then I'll hold it to save and that's it, it gets to six and then it goes back to um about.
gipro x type g2 gear indicator install on a suzuki gs500   on road

If you have any copyright issue, please Contact