Traxxas XRT - Today In Talbots Shop

here we are again

today

at the Tolbert store where I'll show you what's been going on and what's next so this can be the hottest RC car of 2022, the Traxxas XTR, it's a bit like a Creighton 8s armor but with the durability . and the light weight and The Bash capability of the x-max now the most asked question on this YouTube channel is Kev when are you getting the XTR? You're late, you're late to the party once again, yes I know, I haven't I still have one here in the UK, they won't be in stores for a few weeks so as soon as I can get my hands on one, I'll buy one and put it in Paces, we'll see how well. dries out, we'll see how well it handles, we'll do a durability test on it, we'll see how much punishment it takes before it breaks, so looking on the website it appears to be about the same as a Traxxas. x-max but with a lower center of gravity, so we got the Traxxas x-maxx transmission.

Looks like we still have a monkey metal spur gear, so we'll probably have to swap it out for Stills per gig because the Monkey Metro ones go. The differential is also metal, but it looks like they take the punishment on the x-max. I do it anyway, so here you can see the low center of gravity chassis, an automatic body, new tires. I think it looks like the same power system as an x-. max has now these used to catch on fire in the past but i think they have fixed that now so you can see a little size comparison to the x-max and this is what it looks like under the body. like we have a wide Max suspension, we have a little bit shorter shocks, low center gravity chassis, oh and there you go, there's a tech bezel here, but I'm not going to accept all that so I'll put a link below so we can.

Get one and we can get all the specs right. What else has been happening at the car show? The mp10t racing kit is finished, ready to go. I just have to execute it and then we'll take it to compete. Also The Inferno 30th Anniversary which is also ready to rip just run it and then speed up why do I always scream? I hear you ask, well I tried to be quiet and never got any views, no I scream, the views went up so that's what I scream, I've been doing some more work on the monster truck.

I put in a faster rear steering pump and at the last show I did with it, the rear steering was a little slow and took a while to straighten out for corners. Thanks now, faster pump. It should be better. I'll get a lot of comments saying when the next Monster Truck video will be. I've been working on it for a bit, it's taken me a few weeks, maybe even a few months, so far I'm gathering footage, the video is almost ready. all I have to do I have to wait for those tires to be shipped mount the tires retrieve the tires put them on the truck I want the truck to be installed here so I'll go in the morning with a cup of tea and admire it with the big wheels there no I know if the big wheels are going to fit, it's almost the same width as the whole room and the big wheels are there the little rotary engine here it is, look it has two rotors, two cylinders, I don't know what it's called and I've been filming this, I've been trying to get it working and I've been having problems so I'm going to put some clips in.

At the end of this video you guys can take a look and hopefully give me some tips on how I can get this to work because I want to post that video. . It's going to sound really epic, but it just doesn't work. then once we get it up and running, I want to give it some nitrous oxide just to see what's going to happen. Here we have a small mini motorcycle. I've been taking it out, I've been trying to drive it or ride it and we're really having trouble with it, you know we've tried a lot of different surfaces.

A couple of people looked at it, took a look at the settings and I'm really struggling so if you guys have any tips for doing these things. work let me know in the comments now there is no steering wheel on this motorcycle here it has a steering wheel on the rear wheel uh this one here doesn't have it so this one I can ride this one I can't so if you know what I can let me know in the comments that the lemonade will be out soon. The electric laminate should be out soon. I ordered all the parts that broke it on the last run, so it will be back in action.

I have yet to take the lossy 5T with the Taylor engine in there and the Taylor chassis. Look, we have to take it out to tear it apart too, also the Nitro dbxl gasoline. Sorry the fuel tank is leaking, it had a hole in there so I'll give it a try. to stick it to the epoxy it still leaks so we have to wait for a new tank to come with that and then I can play with it again. I have another Sledge video planned, so I have these GPM chassis mounts because the original buttons break right away.

So I hope these last longer. I also want to try some bigger wheels. I have 4S Outcast tires on there so I want to try some 6's because there isn't much air control with these. Who remember this? My scx-24. I put in all the real updates and there we have some Tech Motor fury, well now we're going to make it even better. Look at this. Trill Hobby has created some portal axes to go to this, so there it is. it will probably be the ultimate mini crawler, this one here I have modified for four wheel steering, we will have a two front axle video soon and here I have some aluminum upgrades also from Trill and these are for the FMS and here Check it out, we have a couple of drift cars.

I made some drift videos before and some of you said Kev Kev Kev, it's four wheel drive, it's not a Drifter and you started crying, so we have a couple of rear wheel drive cars. one here is a two wheel drive Lamborghini ready to go and here we have the Pro kit which is all carbon fibre, you have to build it so this will be a gift for Vinnie, don't tell him it's a surprise. some rotary engine clips let me know in the comments why it doesn't work. We tried all the different needle configurations. We try to spin it faster.

We check the balloon plugs. I mean, all the usual stuff. We tried. We could not. to run it momentarily it came on for a few seconds then it stopped and that was it so let me know in the comments why it doesn't work if you know open it look at that moment yeah I don't know maybe the glow plugs . They are not hot enough, take it out quickly and make sure it is shiny. I guess that's okay, let's get right in, two glow plugs. I've also seen another video online with this hose going straight there, so maybe it's some kind of vacuum cleaner. or pressure pump or something, so let's fill up the Nitro and then draw the number 10 by now it's probably already in, oh my god, oh, get out early now, oh, don't look at all the fuel coming out of the carburetor, maybe these nitrous and he could go.

Well let's get it running and then play with a mix, keep it, keep it, keep the block, the block, yeah, I need to make it some more, ready, foreigner, good fuel, oh, out of my way, well, this is all that fuel. I don't know what the bass settings are, they don't help you, so it already took quite a tank trying to start it and it lasted a few seconds, so let's give it more fuel and try again, I have no idea what's going on. The basic settings are on the cob, no one seems to know, so we just have to try a bunch of random settings and hopefully we'll get it working.

Hook me up, foreign foreign boy.