Stern aus Butterbrottüten, Leuchtstern, DIY by Nele

Hello and welcome to today's new video. In this video I'll show you how to make a star like this if you just saw it in the preview. This star is not only quick to make but also very easy. Breakfast mare papers like this Sort them, they look the same, you can get them at grocery stores and online since I can't find them in that many different colors. Then you need a drill or yes. you don't have a hole punch you can use a regular hole punch if you have one you use supporting devices you can also work with a pair of scissors then you need a pencil and an eraser a glue I use a gesture here and it's not a liquid glue but it works too with liquid glue if you do it all.

If you also want to have lighting, then you need a string of LED lights, mine in this case is two meters long. I would recommend you buy one. It really has a small battery compartment so that the weight is not too heavy. Then you need something else that is a little solid paper. You can use a craft card and cut strips two centimeters long or rather free and the height should be. Be about the same height as the short side of the butter to tobias the hanging thread so you can use the thread more easily. You can also do everything with a sewing needle as a sewing aid, start like I said, it's really very easy and quick to do, so you can make a heavy weapon.

I'd say there are at least five of these. I usually make my stars a seven. You can also use 819 or twelve of those myths depending on what you like so far. , I'll do it now with seven, then you place your handles so that this short side is in front, so for me it's even but also around and it starts with the life of your bags, you live at least five bags on top of each other and you glue all as if you were drawing something backwards, that is, a line below in the middle and a trick at the bottom.

If you do everything with a dance like I did with the device, then you have to edit everything. in advance and it looks like this: First I place the perforated types on top of each other, so I first hit them and then I place them on top of each other. Why did that happen? There are simply ten reasons why my support device can't close them all. at the same time, punch if it is already glued, you just can't get in well with the support device, so if you stand in front of it, punch it when you cut it and right after that, like we started now, first put the paper bags one on top of the other when separating the bags.

We have lived by drawing the tips or you can also cut them by hand because here, for example, it is not necessary for everything to be straight, so it is much longer. You cut the side here and then cut the whole thing with zigzag scissors, for example, Scholz's cutter is simply heavier with a straight one. I usually take it out ahead of time, so here I put it on the shorter side. the whole feeder on my tip, then I show it to myself and then I can always cut it all out with a regular pair of scissors or these zigzag scissors, but you can also use a Stanley knife for this, because your heavy Swiss knife or chosen The knife has to cut well to cut through these layers of material, the basic structure of a star is already ready, you can do it completely, they are already unfolded and now we will also give them the set.

There's a little more stability here on the front and here on the back of the straps. This is really just for stability. If you want to stick a star at the end, then that's not the case. I really need to do this so I can fold. My stars keep a backup and save them to save space, so once here in the middle on the front, place a strip of paper and an adhesive strip on the back to give more stability to the whole if you place a chain of lights on your star. like I did. If you want to make a hole here with the locomotive pliers, I would just work with the hole thickness of 4.5 millimeters and just punch a hole here in the middle because here we will then fall through this fairy light world, so now I'll do it over that, I make a hole in the top here, I use the smallest thickness hole here, two millimeters, and I'm making this hole at the beginning and I joke in one there that you glued to our cardboard or our paper. for reinforcement.

Here I'm just making a little hole when it's unfolded here. Now I can thread a thread for the yes, so if you haven't punched all the way through the paper before, now you can cut a width. Of course, you can do everything freehand, but now you can cut out a triangle here, for example. Here I have worked it again with my zigzag curtain, then it is also done. like or here I cut out a lot of semicircles, it looks like this, so you can express yourself very creatively here. What shapes do you want to cut here, so I have different ones on both sides, left and right.

I work on my cut things. when everything is illuminated, of course, it serves a completely different purpose. Here I turned everything into a hole punch so I have lots of different sized holes and I really like it, especially when it's lit. above, not very pretty, that's what you're doing here now, you're just cutting out different shapes or figures. I'll take a quick look at it here. To hang it you simply have to use a thread. Depending on how low you want your star to hang, then I'll just use. I have this nylon disc here, it's actually very invisible, so to speak, so it almost looks like its star is floating on my needle on both of them.

The end pieces are missing, so now I have a loop down here and I can see my decoy watch here. I don't take my needles out completely, but also so that I sleep even better here and through this loop I pass it with my. Put the needle together and you have a hanger, tie a knot in these end pieces here and then you can make a star hanger. In here we have the biggest holes and here now you can just pass the colored lights through them. their height and if they are simplified around here, these pieces are still about the same length, since in reality each tip of such a small light on the inside has two three tips and, gentlemen, a little carpentry work when you have done it, there will be something like that.

There's actually a piece of fairy lights on each star or each star tip with about 23 points of light up here, you go back from where you started and then you can connect the two, but you don't have to. You could have a battery compartment here if you want. I would like to stick it here on the box if we prefer, but in the end it is quite good here because I have really decided on a very light device, yes, and its star is ready. I hope you liked the case in the window, then please like it, subscribe to my channel for free and I will also recommend it to your friends, thanks for watching.