3 High End Dollar Tree Valentine's Day DIY Decor Crafts | Valentine's Decor DIY Dollar Tree

Hello friends, thanks for stopping by, let's do something. I'm starting my Valentine's Day window using four of the five for seven

dollar

tree

frames. I'm removing the glass backing and the little tabs that hold them in place once I'm done. I'm using painter's tape and attaching the four frames on the front. I make sure all the sides match up perfectly and then tape them together. Tape the frames together is completely optional for me it just makes it so much easier when I use my hot glue to stick them together once all the tape is in place it makes the frames easy to bend and all I'm doing is attaching them using a drop of hot glue when ready I put a drop of hot glue on the back of the attached frames, once the glue dried I flipped my frames over and removed the painter's tape with all the tape removed .

I'm using some white acrylic paint to paint my frames. I'm using white, but you can choose any color that best suits your home

decor

. Once my first coat of white was dry, I could still see part of the frame, so I ended up giving it two coats with the paint dry. I put the glass panels back on my window and this time I'm using an e6000. Adding the glass is completely optional. The window will work fine without it and I'm using my e6000 instead of hot glue because I'm hanging this. on the wall and I just want to make sure the glass panels don't fall off while I was adding the glue I saw white and thought oh my gosh the paint isn't dry yet when I took the tube out to look at it apparently.

I bought the white e6000 and if you notice it's white that's why I normally buy the clear one, but the white worked perfect for this project. I want to hang my project so I need to make a hanger for the back. Everything I'm doing. I'm taking a heavy piece of floral wire and twisting it into a loop to secure it in place. I'm using a generous amount of my e6000 and putting the cable right in the middle once I had it in place I left it. It was installed overnight to

high

light the heart in the middle of my window.

I am using one of the

dollar

tree

paper bags along with an 8 inch wooden dollar tree heart and will also be using a mod podge that I cut into the side. from the bag and also removed the handle when I was done, then I removed the hanger from the wooden heart using a paintbrush, I added a generous amount of mod podge to one side of the heart when I was done, I placed the mod podge down on the smooth side of the bag and pressed it into place once my heart was dry. I used my exact blade to cut it.

If you don't have one, you can always use a pair of scissors. I'm using some amaranth from the dollar tree. and roses to

decor

ate mine, but you can choose the flowers you want. I am removing all the leaves and flowers from the stems. The roses are in full bloom and I need two rosebuds, so I'm going to remove two from the bottom. petals on two of the roses and then I'm going to replace the green base. The amaranth is too long so I'm going to cut them in half and I'm also going to cut off all the little finished ends of the flowers and leaves once all my flowers are cut and ready I'm hot gluing them to the heart .

There is no right or wrong way to do this, you just decide where you would like them to be and then I hot glued mine on. Place once my roses were attached to one side I started filling in between them with my amaranth and the leaves so I started working on the right side and added some amaranth and what I did was leave an opening before I glued them together with hot glue. my rosebud because I'm going to add a bow, I kept filling all the empty spaces with my flowers and my leaves and I also found some IV in my stash and added that too now that all my flowers are added.

I'm going to add a bow and I'm using this pretty black wired ribbon that I found in the wedding department and I'm also using some of this sheer red dollar tree ribbon. I decided how much time I wanted. my tail and then I made a bow with my black ribbon. When I was done, I used a piece of floral wire to attach my bow along with my full black bow. I used the red ribbon and made a simple bow once again, rolled it up. Together I tied it with my floral wire and then attached it to the black bow using my glue gun.

I am setting the lasso to the open space in my heart to finish. I'm using my e6000 and I'm pinning my heart to the center of the window today I'm participating in the

valentine

s diy challenge hosted by heidi of heidi sunbol diy. She has an amazing channel that I will link below along with the playlist for this challenge in my description for making my Valentine's Day home. I'm using one of the plastic benches that are shaped like a dollar tree house. I'm removing the backing and off camera. I'm going to take out the plastic insert. It actually fell apart very easily.

I'm going to use this. Cute heart bag with dollar tree design as a backing for my house, just like in my last project, I am cutting the front panel of the bag and just like in my last project, I am using my mod podge and a paintbrush to hold the back of the house. to the bag once I'm done, I place the bag on the house panel once it's dry. I use my x-acto knife to cut around the edges. I'm adding a small bouquet to my home and using a few. of dollar tree flowers along with red and pink glitter hearts.

I'm using some heavy pieces of floral wire and I'm going to cut them in half with the wire cut. Now I am attaching it to the heart by placing it. All the way down, I'll continue doing this with three of the red hearts and two of the pink ones. This wire is quite thick so the hearts stay in place, but if you have a thinner wire you can always add a heat point. glue to make sure they stayed on the wire I cut some of the roses and baby's breath off the main stems when I was done I put them together to make a little bouquet once they were exactly how I like them I used a piece of floral wire to hold them all in together.

I continued wrapping the wire around all of the stems just to help them stay in place once everything was nicely in place. I started adding my hearts and used that wire to wrap the stems as well. The same red ribbon I used on my last project and with a little hot glue I'm going to cut a piece and wrap it around the base of the bouquet to cover all the wires once all the wires are hidden and out of sight. Then I'm using the same ribbon to make a simple bow. I then used my hot glue gun to secure it in place with my completed bouquet.

Adding it to the back of the house is super easy. All I'm going to do is hot glue it on. in place with the back of my house complete, now it's time to paint the front. I need to cover the coin slot on top, so I'm going to modify podge onto a piece of white paper once it's dry to the touch. then I paint my house with some white acrylic paint while my white house paint dries. Now I'm going to make the chimney to make the chimney of my house. I'm using the rotating tower blocks. I'm using 16 of them and I'm making four fireplace pieces with four blocks each.

I'm using my thick Starbon glue to attach them. It works amazing and will put these wood blocks together in less than a minute. I use Darbon glue for one of my previous wooden ones. snowman projects and works great. It is now my preferred glue for all my wood projects. I really like that you can exchange the mouthpiece. It has a replaceable cap so it doesn't dry out like many other super glues. Impressed by the way the glue worked, Starboard gave me a 10 discount code that I could share with my friends. I'll link it below in my description in case you want to try this Star Bond glue on all three of my sets. blocks were installed probably in less than a minute and for the fourth set I'm going to do something a little different.

I'm going to add some smoke to my fireplace so I'm going to cut five pieces of thin floral wire at about 10 inches each once cut and to give them the look of billowing smoke I'm using a pencil and all I do is coil the wire around the pencil with all five complete, I'm placing the flat ends between the blocks and attaching them with my star bond glue now that they're all set up and keeping with my Valentine's house theme. I'm using my pink and red acrylic paint to paint the fireplace pieces to give my wire a smoky look I'm using some gray acrylic paint and giving them a coat I'm using some of these little red hearts I bought at the tree of the dollar have a sticky back and I am using two hearts for Each piece of wire is very easy to attach.

I'm just removing the backing and then placing one heart against the other with the wire in the middle. When you're done, you'll have some little hearts floating out of your chimney with everyone. My batteries are full. I'm using my Star Bond glue and attaching them. I am using a dollar tree wooden love sign and painting it white and pink with all my pieces complete. Now I'm putting them together. I'm applying a bead of glue to the back of the house and then attaching the backing of my heart once it's complete. Now I'm using my hot glue gun to attach the love sign to the front of the house and be done with it.

I'm using my glue gun and placing my fireplace on the side of the house and with that our Valentine's Day house is complete to make my heart shaped chandelier. I'm using one of the dollar tree wine glasses. I'm also using three packs of these stretchy heart bracelets. This project is very easy. I'm using some e6000 and all I'm going to do is attach the bracelets to the glass. I am making this chandelier to work with an LED candle. I'm not sure how it would work with a live flame. This was the pattern I chose for my chandelier, but these bracelets would look cute put together in all different ways.

I found these really cute heart stickers at the dollar tree and using my e6000. I'm going to place one in the center of each of my designs. I'm going to add some decorative foil filling to my candle holder, but if you don't have any on hand, you can always leave it simple or you can. add some sand to finish our heart shaped candle holder. I am adding one of the dollar tree LED candles. Thank you so much for stopping by and doing these Valentine's Day projects with me if you're new and think I'd do it. I would like to go back and hang out with her again.

Don't forget to hit the little red subscribe button below. See you soon, goodbye everyone.