Ein Diorama wie in Echt entsteht: Krötenwanderung

Welcome to my new video project by Modellbau Hafner. I am always asked where you get these fantastic boards, what you do with them, how they are built. I want to show you in this video with many images and. Also make some comments about it during the event. Unfortunately, the road was already finished in the project without me being able to take any photos, so here's a look at what my streets will look like in a future project. I generally prefer projects like this. Use the Faller road case because the color is authentic and black. Colors are only available freshly tarred and in the rain and later when you continue working and processing.

This works best with a neoprene roller. How do you get a uniform application? ?Brush with always clear strands You don't have to throw it away immediately, but when you use it the work order has already been fulfilled, especially with such small objects, otherwise I have to do it very quickly and wash the entire roll and that's it. Actually it's worth it too, you just put it in cling film because here we just have a zipper bag, close it and then you can use it a few weeks later. Use it for other projects. For this project I had to choose Woodland Reed. grass or cattails from the bush This time I decided on the angry things because the cattails, if in the other place where I tried the street manufacturer, you can visually compare later and the effort.

I have not used these forest products yet. other things yes but I have to say it is on its own and the workmanship is brilliant these pieces wake up on these strips with a pressure sensitive adhesive you can always use them at the same time to set them up Tuesday of course glued permanently, but later when you add so much glue and water they get super stuck and applying it is really easy, just take the PZ and place it and you're done, then you can use scissors to shape it where you want the individual bristles to be. a little bit and or Survive and it's just great When I build the terrain more, I use an earth color, which I think was also from Woodland or for me it's even from Nord because back then they still used it well. as a base color, often as a first glue, somehow like here, we sprinkle some brick because the farmer wanted to make a reasonable access together, here we also decorate the rest of the glitter with this color, to add more deposit well into the ground and the stone, then first sink slightly as soil embedding products, so I actually use everything that is available at minitex, as the companies are called, and we all model the scene of a Mini Tech.

I have already said forests and all kinds . of the things on the market that I like the most and that were sometimes tangible are not created by either of them, always a monotonous

diorama

that looks like the other after the arrival of all the material back to the course with isopranol when we put our old spray bottle. This means that the material loses surface tension and this means that the next adhesive can be applied much better to the material and also washes it off. At the same time, it does not appear in our

diorama

, yes in the spring there is a flash of dead grass in the background.

The bottom layer of our greenery is just sprayed by hand because it's supposed to be flat like in real life and the normal grass isn't just a little bit on top, it's just sprayed around the edges. and some thick royal and then see how nice it looks and then green grass grows from the dead grass, same steps as on one side, now we do a completely different part, slowly all around and then you can let the first area I know that. Go out and build something bigger if you want it to be much easier than it takes much longer to move and then you can basically continue immediately on the other side logically and only a short wait time to green up.

I use an electric one. Getting started is easy Ideal for displaying individual graphics and for greening large areas that do not look like a uniform carpet of grass. Therefore, we apply the glue in individual places so that each tuft of grass can grow on its own. Use silhouette as grass if it is simply for the color. For me, I think it is the most harmonious thing for nature after green, just turn it around and hit it hard. All loose fibers are detached. again and continue using them. That's why you should also make sure you have a clean workplace at the beginning.

Our topic is the double migration of toads. That is, I decided on the toad balloon bush, we took out the individual components and used them. Consider the green strip as a trapping fence or protective fence for the toads. We won't process them first so we can then add suitable vegetation on both sides since they are in the middle of the grass and if you want to use them. then it's actually not that easy and it activates the activation spray then it lasts immediately and it just goes by quickly drops at a time and it's good you hit it the first time that's what we're doing now around the strip and then We can then continue with the construction of the land.

Now we will green the rest of the area around it and then finish with the basic turf application. We're actually only going to use one color because in the spring the fresh grass is really growing. and even no big differences have been made in the color of the grass except that the dead grass is still underneath here now we are putting the protective strip for the water so that we have nothing to choose from at work as a water reserve and for two we have found a casualty or a companion. I like this one component Israeli water, but you can always add very thin layers that dry quickly.

The reaction is that there is no heat in the chat and you can color it perfectly. colors no matter what you need, there are some really cool things when it comes to coloring, but you want to make sure you don't use too many colors, just a few drops here, about 100 milliseconds will reach two three drops to color and now it looks right at the beginning, It has a very light color, that's enough because we already had a green base beforehand, so the water stays cloudy, but hey, you still have to apply a little water with the very fine brush on everything. the corners so that there is a base film that forms so that it does not leak, you only have a little left to make it tight and first you can remove it from the tape without there being too much pressure that can go through the Of course, an old ship of wood should also float.

You should also choose artetech models that are simply beautiful on the little ones. Actually, this video should also show exactly how to drive a boat and how to age, but that would stretch the whole thing. The frame and video will last an hour and a half in the forest, the photos you can see here are quite good. Recognizing how to understand ours is a little work, but then we are rewarded with a wonderful result. AK weathering pens. They are also a wonderful alternative to colors, with which you can really emphasize small details without always having to have the brush in your office.

These can be used later, smeared a little with water and things like that, I just have to get used to it. It is not necessary to buy the entire program, but in the long run it is empty. Let's see that all the space isn't added at the time we made the boats, of course. Water that has already dried once will do so. A little more will be added during this time and now we will remove the edges of the streets and now we can focus more on them. We will stick our boat on the surface of the water so that it cannot float later.

Continue working on the diorama until the end. The glue has dried. First the bushes will be filigree, then we will also have selected them, we will have drilled small holes and we will fix them again with super glue to the bush on the ground, although the holes are also prepared for our two large birch trees. drill holes, install birch trees and then the large amount of vegetation was already finished, then the next layer of water is added and so that our pond little by little fills well and fills, water very carefully if no model is met, the amount is never too much. of a lot of use, it is better to water more often, everything is faster completely dry and ready when we put together a small part of the road closures that were still in this package and now we design our beautiful diorama with figures and accessories from the prices if not It doesn't fit because the holes are not exactly for spraying.

On a small scale you just have to rework the manual a bit as you can see in the picture and then it's okay because these students for the price start from the stand on the back it's just brilliant there's no sign where you stick the mask . That is the way to go. The sign is mounted on a pole and our water has dried, we remove the tape and carefully cut the raised edge with the utility knife. so that there is a nice smooth surface on the edge. When the figures appear, there is also a little trick, which is to lightly spray the figure with super glue on the surface and place it where you want and it will look like one.

Now let's move on to another task because I actually liked doing it. The eyes were even better, it was painting figures, in any case we painted our toads on toads and some other animals, butterflies because there is also a snake and therefore it is better to fish. our fish pond now we continue with the water we use the channels which are easy to apply if it is quite calm. If you want to have water, there is a very very light wavy structure, only there are also red waves, which are a bit of wild water, but with these water waves you can make them even if you let them get drunk, then you can also lift them up and form other ones. waves that roll easily is a really cool material, all the components go together. the distribution of the forests is really wonderfully coordinated with each other, you can already tilt the water, eat it, I am restless and maybe we will also bring our fish to the surface and we can continue a little with the water change after work on it, so the diorama is really finished, there was a small handle that maybe wasn't captured on camera since you like to stack it etc., but now enjoy the pictures of this diorama, thanks for your attention and until next time if you like. , get a free subscription, thanks ciao