Micro Link Beaded Weft | Braidless Sew-In Tutorial

Hello guys, I'm Michi and today I'm back with another video. I'm going to do the

micro

link

weft

and use 26 inches of Malaysian mink body waves from the Posh collection for this particular technique they are using. I need your Loop to hook your pliers and your beads and I use the beads with the silicone liner so guys I'm going to use the Malaysian mink body wave so this is what it really looks like off the grid but I colored it to match my client's head and she is jet black so this is what it looks like after dyeing the hair, as you can see it deposited the color very well and still has a lot of body so I already liked it.

I shampooed my hair and blow dried it, I'm just going to straighten it a little bit, not too straight, but I'm going to straighten it enough so I can get the

micro

length and then I'll show you how I do it. my micro

link

interweaves row by row, so of course guys all the products that I'm going to use in this video are from the Posh collection. I'll be sure to leave details about each individual product in the description section as well as the direct link if you want to purchase, okay, so I'm going to straighten her out and I'm going to start pulling her apart and start adding her

weft

s, so guys, I'll do it.

What I want you to understand is like any type of follow-up, you like any type of plot. That you do the placement of the clues is very important and it is almost the same whether you are making eye tips, if you are making the micro link or if you are making ribbons, as long as you understand the placement of the clues that will help you place the hair. on your client's head correctly and what I like to do is always like a U shape because I love my hair to fall towards the front so it can be full in the front and full in the back, so I'm going to give you show to you.

How I like to place my rails, okay, so I'm doing a middle part and just making sure to leave enough hair in the back and on the sides so that if she wants to lift it up, the rails won't show. To not make her beads uncomfortable, you want to make sure you place them where there won't be a slight tug, so I'll use my Tease Me spray to try to tame her flyaways before adding my bead when I add. my beads I like to pull the hair down, not too tight and pin it up, and I'm not gathering my beads too much but close enough so that the weft doesn't sag, so guys you may have seen this method done where the stylists come together. the entire row now it is absolutely your discretion how you would like to do it, but I don't think it is necessary to put the entire row together, especially if your client has long hair, now you just want to make sure you place the beads. close enough to where the weft doesn't sag and is well placed now, if I had a client with shorter hair I would absolutely tie their entire row together because I would like their short hair to be between two F's that way, I don't have a lot of strands Short hair is interfering with my installation, so guys, to get the fullness that I want, I'm actually going to put a weft under your bead and on top of your bead.

I'm not sure if I'm going to do it. do that all over your head, but I want to make sure I start my first strands by doubling them just to make sure I get the fullness that I want, so I'm just going to pin your beads and then I'm going to do my first run under your bead, like this that we just want to make sure we get this hair out of the way before we start sewing the weft. Okay, so I'm going to start my first walkthrough. I'm going to run it through her hair, but If you don't go through the link, you want to go through the hair and track, then you're going to do the same thing on the other side of the bead.

Remember not to go through the account and I'll go back to the account. starting just to secure it on the outside, we're just going to do the same thing across the track, it goes on both sides of the bead, it doesn't go through the bead, it can go across the track or under the track, whatever works for you, going under the track is usually faster, so when I say under the track, this goes under the track or you can go under the foreign track, you always want to put the needle through the thread and that It's what secures the knot that you don't want to tie too much. tension on the hair pulling too much on it just let it sit naturally in place so this is the last bead so we're going to go both ways and then I'm going to go through the rail just to secure it and then I'm going to go back to the side Opposite of foreign, we're just going to drop the clips and then go to the top of the bill with the next track.

The best thing about this technique is that you won't be able to see the beads so some people like to cut their wefts some people like to fold their wefts I personally always like to cut my weft I think it leaves a lot of splatter so I love cutting the weft because it's not worth trying to save track and keep it as a full thread if you're going to have clumps on the side of the seam, also make sure that when you thread the needle you make it long enough so you don't have to rethread it in the In the middle of a weft, you want to make sure you have enough to go from start to finish, so that whatever is on top doesn't have to go to either side of the bead through the hair, it's just going to go through your bottom weft. to connect the two and that will close the account between both frames so they can't see the account, so guys, if you are a stylist and you want to offer this luxury service, I would definitely say bookmark your books.

About three to four hours is a very tedious process and you want to make sure that you can focus solely on this client and reserve enough time in case you run into problems like maybe having to remove some accounts or add more foreign leads over and over again. We did two wefts, one under the bead and one over the bead, so guys, although this service offers some versatility where you can pull it up into a ponytail, keep in mind that your natural hair flows throughout the extensions, so they want. Be very careful when you are doing it in a ponytail or even when you are curling your hair, be aware of the temperature at which you have your curlers, the goal is to always take care of your natural hair, even when using extensions, so in fact, I'm going to fold my weft under the bead because I want to make sure I have enough hair to make it nice and full, so I'm going to try it in this particular row and see how it comes out.

I like, for a service like this, I always like to tell my clients that it will last six to eight weeks, sometimes it will last longer, but you don't want to tell them it will last longer and then if not. If they're not disappointed, I prefer to tell them a shorter time period, like six to eight weeks, that way they won't be disappointed, so if they get 10 to 12 weeks, it's a plus that it lasts longer. overseas, this is a luxury service, which means it's high maintenance, so you'll definitely want your client to come in maybe every two or three weeks to get their shampoo style and maybe settle the score if necessary, it's Okay, so I'm getting more into it. head in the front, so what I'm going to do is start with the single and then once it's right here, I'm going to duplicate the plot, so what I like about this setup is that you can control the density, no you have to do all the rows the same way when I was at the back I did one weave underneath and one at the top and then as I gradually got to the middle I did two at the bottom, one at the top top and then I did two on the bottom two on the top so you don't have to make every row the same, just keep in mind that as you get closer to the top you'll want to put maybe just one weft on top and bottom and then even out possibly just do a period so it doesn't get super bulky and thick at the top because you want to make sure it still lays flat, so I'm going to put most of my volume in the middle.

Thanks, it's okay, now since I just had a plot at the beginning on the other side. I'm going to cut this so that both sides can match up, so you have a simple weave towards the front so it's not bulky in this Tempo area and then it doubles as you go. the back is okay guys so I brushed his hair down just to see if I could fit in more clues and I think I'll try to get one more. I have some room back here, so I'll make a row further back. here and that should be foreign foreign guys, so that completes our micro link plot setup again.

I use the 26 inch Malaysian mink bundles and you can get them at I love poshcollection.com. I think it turned out great and again guys you have total control over the density you want to do in your setup, if you want to do single weaves, double weaves, however you want to do it, you don't have to stay consistent throughout the head, just do what works for you. you. I hope you enjoyed this. video make sure to subscribe to my YouTube channel crazy for Michi and follow me on IG on crazy for Michi thanks foreign guys