EASY 1.19 Minecraft Bedrock Wither Skull / Skeleton Farm Tutorial! (PC, XBOX, PS4, MCPE, Switch)

Hello Stoick, thank you for joining me in the essential guide for this

tutorial

. We're going to work on a

farm

of

wither

ed

skeleton

s. It's a transporter, it's not that cool. Yes, this will work on Xbox PC, Playstation Pocket Edition and Switch. of the rates I was able to get at this

farm

were 40 piles of bones, 20 piles of charcoal, 12 piles of fire rods, and 100

skull

s. It had no portal, no complex rail system, or even a second player. I have different. types of controls for this thing so check it all out let's do it when you start your farm you need to consider what kind of monsters will be on it so we have

wither

ed

skeleton

s flaming skeletons and magma cubes.

There are many magma cubes. On my farm, because I'm in a basalt biome, there are a lot of different items to consider and the ones that are important are the ones that aren't stackable and can clog up your storage system if you're trying to do any sorting. Other monsters you'll want to consider are zombified pigs, piglens, and hoglands. Hoglands probably won't appear in your build, it really depends on the location you choose, but there are all sorts of non-stackable items here. Plus, that can clog your system. The hoglands will not be killed by a trident wielding assassin so avoid them if you can, so for materials we are going to have a lot of minecarts, in my case I had over 54 minecarts just because of how things turned out, you could have less, so which should be ideal.

What I'm showing here is about four to five stacks of iron ingots, so you have to be prepared for that and then there's everything else, which isn't much, so we. We're just looking at a bunch of glass slabs, glass planes to catch our monsters, a single block that stands out from another brick, we need materials for Trident Killer, you can make your own however you want, but I'll show you how to do it. Do like I do mine with droppers and spotters and then we need rail activators and lots of redstone blocks. Now, if you don't have many redstone blocks, you can use levers instead and I'll show you how to do it.

Well, don't forget to have a fence because this is a key element when we work on this farm, so this other branch of the fort is perfect because it goes in a north-south orientation and the way we can do it we can verify. this is to place a piece of land use a sunflower and the sunflower always points east no matter what dimension it is in and then we know if that is east then north has to be this direction now if you are looking at my coordinates, We will see that they go in a negative z direction.

Negative z is the key element here, so Groova Guy has a great video on the mechanics of Minecart and I definitely recommend you watch his video, but for this I'll just summarize it quickly. about why we need this north-south orientation, so I'm going to use a redstone block, an activator rail, another rail to change the orientation a little bit, I'm going to place blocks on each side on the east and west side and then I'm going Let's go ahead and place my mine cart so you can see it's already running, working hard, so if we push this skeleton and he's going to escape, I'll jump for you, buddy, jump. to be pushed north, always push north now, if I had another block in the way then it would push me south, but if that happened mine cars would be coming and going so if we can keep one. direction then we can make a minecart transporter so now that we have our position determined let's go ahead and make some efforts to catch our monsters to see where they prescribed if the skeleton spawn points are and to do that we can place panels of glass. together a block or two up and what ends up happening is that if they appear inside, they will be trapped and not going anywhere, so this is great for survival because you will have to jump away. and you're going to go back and reset the spawns here and then just try to place as many glass panels as possible before the monsters start spawning, you see them, they're already on the way, get out of here, but I'll go ahead and complete this and then we'll find our spawn points once these glass panels are in place, we'll notice that we're starting to catch some of our monsters, the flames will creep, but it's okay, we can.

We can settle for that, the next step is to tile everything else, so let's go ahead and tile these other areas along the outside and right here, in just one block on the inside, we'll get to this other part here soon, okay , we have these two rows are all cut off, let's go here to this other part, we will start breaking this barrier on this side because it will help us place other entities later on, so let's go ahead and break that you removed that barrier. Go ahead, slap it cool, we have one, two, three rows of slabs, we have two rows of glass panels, these glass panels are trapping our monsters, so let's find where they are spawning so we can give these monsters a chance.

They spawn sometimes, they will spawn slowly if they are within the spawn radius of 24 to 44 blocks, you can see some are still spawning, but once they spawn we can find out their spawn location and to do so we can get our dirt. we block again and we get our sunflower when we're facing east and that's negative north z is our north direction. The monsters will appear in the northwest block of your spawn point, so that's where they are, so let's go ahead and mark that block right there next. I'll go ahead and complete as many blocks as I can where things appear.

You may have to leave the area. Come back and the monsters will be refilled, so I'll go ahead and do that now. Okay, now that we have all of these spawn points figured out, all marked in yellow, we can move on to the next step. You're going to want to eliminate some of the outside areas that could have the potential to spawn now gas monsters. They will appear and only cause problems so you have to look around, find them all, just start knocking them out if they are thin, you know, break them if you want to keep hitting things, go ahead and hit them, remember we will figure it out. our forward position a little later and then you can really understand the scope of everything that is going to be generated.

Okay, so we have all of our spawn locations determined. I have a mark here in yellow and now it's time to make our trident. assassin, so I'm going to take this out of the last position one two and then we're going to put in our assassin trident, so I'm going to clean up this edge here, make it nice and smooth and we'll get started. our assassin trident for this build, we're going to place this assassin trident five blocks below our main platform, so let's count this, so we'll go one, two, three, four five, so once we're down five, we can put our extermination chamber, so we'll take that out and make a two-by-two block.

This is going to be our kill chamber here next we're going to place our piston so you place the pistons in sort of a staggered location so let's go ahead and place them after that let's fill each side of these pistons now we're going to work on the rest of the assassin trident to make this part

easy

, simply place a block on top of each of the pistons, place a dropper in each of the corners the orientation doesn't matter, but this one does, so let's get into position. the arrow points to the block. the arrow points to the block. the arrow points to the block. the arrow should point to the arrows on the block.

Alright, that's it, it was pretty simple, so we'll put a lever on to test it. You can put it here on this block, it should do a rotation and then if you click on it again, we now have an active assassin trident. so you're actually just sending a signal around when you energize this block, it's actually going to energize the piston below, so we're making a circle with the assassin trident in place, we need to start putting up some barriers. the path so we can split some of this up right here, we can complete this part when we get to the top, let's go ahead and make sure the blocks are as tall as the monsters, so just two blocks above our main platform.

Lest we forget, let's go ahead and throw our trident into this trident, it doesn't have to be at full health, it can be at partial health. You can put in a couple of tridents if you want, you can even enchant them for this

tutorial

. I'm just going to add two, you really only need one because they'll end up next to each other anyway. I haven't seen a huge improvement in rates, but you can experiment with our tridents instead now it's time to place a small storage system at the beginning of the video, we talked about what kind of items you can expect from these monsters now, if you are Planning on being away for a while, I recommend setting up a substantial rating system that way you can get rid of it. of your stone swords and your bows and arrows and other things that you don't really want, so for the next part let's go ahead and lower a chest, we can go ahead and we'll put our hoppers in place.

Creative is great to get these. So let's see here, we're going to want a one block space between our kill pad and three hoppers. Now this is important because we want to place a minecart hopper and this can be quite

easy

to do, we will only use three. the rails keep shifting place the rails make sure you get a good curve place your mine car hopper there you can break your rails and you can make sure it's highlighted see the edges lit break your rails there and now your mine car is practically In the center of this, the best thing about the assassin trident, is that it goes in a circular pattern, so if things don't land right on top of the minecart, they will be pushed over it at some point, so let's go ahead and complete this correctly . here, make sure you don't have any spawn pads so we can put some glass here so it can be seen, you can do that, you can shape it any way you want, but for this we have our assassin trident in place, now is the time.

To figure out our attack position, the trident assassin is a key piece of this, we want to make sure we know where our limits are and one of the limits is how far away it is in the z direction, so we'll count in so many blocks and we'll get out a lot blocks, but another key part is how low to go, so in this case our kill chamber is there, you can see it on the glass and we want to be at y68 and the reason is because it burns. I like to be on the same level as you, so if you have your attack position up here, they will never float towards your assassin trident, but if you are on the assassin trident level or lower, then they will. on their way to your level, they will always sink, so that will be important, so we have and 68, which is our key element right here, and we will go 30 blocks from the edge of our assassin trident here from the last assassin trident. platform so we're going to go at 30 in this case I'm at 14.80 so I'm going to go up to 1510 that's some math for you and now we can go down to y68 so if I drop on that totally messy and what we see here is that 68 yeah, we're at 68 now, so we're in a good place and we'll check that out here in a moment to show you why I chose these. numbers so let's go about 27 blocks one two three four 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 well now that we are 27 blocks away we can start to see where it is everything is going to appear, it looks like we have a good number of spawn locations together and one thing we can do to check and make sure we're in a good position as well is you can probably make a circle with a radius of 24 blocks. a semicircle, there's no reason to go this far unless you need to remove some things and that will tell you how far the inner circle is from the spawn radius.

Anything within 24 blocks won't spawn a monster, but anything between 24 and 44 will spawn monsters, so this spot is important because it will include our full Assassin Trident and then go as far as you can to the right to capture as many spawn points. as possible, so if you have the opportunity to use external plugins or resource packs, you can go to the Foxy No Tails website and get their armor support resource pack and I love this because it's easy to use, just load it In your game, you place an armor stand and give it to them. a banner and you right click and change it to first or second position and it will give you a green sphere and a red sphere to tell you where the spawn radii are, if I were to ask where the armor stand is the green circle will tell me that no monsters will appear there now, the red, if it is between the green and the outside of the red, then monsters will appear, so you can see that we have one, two, three, four, five, six, seven places ofgeneration within this construction now.

We will also need to notice that our trident assassin is also inside it, so even if we do, if things come down and fall, they will still be inside our position and we will still benefit from them. So we are maximizing this as much as we can to save resources. We know we don't have to go to the edge. Here we have already slapped a lot. This was just for protection. but now we know that we don't have to cross all the way, so we can just separate this part and make sure it is generation proof for the most part, this will help us save some resources in the end, no one here really. want to spend more than necessary, especially to use redstone blocks, many rails, many mine carts don't put more than necessary, so we will just block this part, nothing can go through and in fact you can cut this part too, okay, so we wall it up, we slap it, we're protected in that direction right in In case we go out of our spawn radius, now we can get rid of our armor, so the next step is to show you how to use levers to power your activator rails.

Let's get rid of our trap here, our glass panels. To help with the next part, we're going to dig one two three one two three one two three one two three one two three one two three one two three and what we can do then is fill in this top part. use something contrasting that way when we're underneath we can know exactly where to put our levers in this case it's nice that we can go in here and you can see we have this opening that we can put on our levers you put one in, hit the

switch

, put one on the

switch

, place one, place the switch all the way down after you're done, although you have to go back and hit anything that has an open space, so once you've filled this entire row with a new type of block and you have levers under them and you also have the slabs under them to make sure you don't have spawns, you can see that when you place the activator rail it will light up here is one without a lever here is one with a lever.

It's important to have levers on each one because when we parallel our rails they are not connected, so each block below needs to be active now that you have the means. To make redstone blocks I definitely recommend it, all you have to do is take this row all the way down and then fill it with redstone blocks so now that we have our redstone blocks in place we can go ahead and place our fence. we want to make sure it's level with our fence or our redstone blocks, the mine carts will push them towards the top of the fence, they can't really go anywhere once they're up here, but they can be pushed towards our Trident killer I've tried trap door buttons I always end up stuck in this mine cart full of molasses, but the fence seems to work well and actually helps push them out because there's not really much to stand on.

Okay, we're close, so let's go. Get on our activator rails, let's go down. I'm going to go over two spawn positions and get everything set up and then I'll fill in the rest, so we want to make a trigger rail trigger. rails activator rails activator rails activator rails activator rails activator rails activator rails activator rails activator rails activator rails activator the correct orientation, what we can do then is break our regular rails all the way and now we can solve this spawn point, so we'll want to have some glass, we'll want to have a block and let's go ahead and We'll put a piece of glass on the back, on the side and again on the side, we'll fill it up and make it a little bit more high.

In fact, we'll make it twice as loud. We'll get another set of glass blocks around. and then we'll put one right on top of it when we're ready for everything to spawn, we'll take out this block and the monster will appear in this corner. These two glass blocks will push you into our minecart system and take you to our assassin trident, but for now we're going to place this other block to make sure nothing spawns while we work, so let me place a few more blocks just to show you what needs to be placed to get to our spawn point take out the back put them on one side to each other we will fill this in one go we will put glass blocks around it we will put another block there we will go up a little we will put two more right there and we will do it until the end, okay, we have all the glass on the rails, they are all active, nothing is spawning because we have everything locked, let's go ahead and place our mine carts now.

It should be swinging back and forth, we're going to go all the way down, okay, we've got all of our mine carts on nothing spawning because we block them, all of these things are going to push our monsters towards our trident assassin. is ready for some action so let's break these blocks here all the way down and this should allow our monsters to start spawning because we have those spawn locations determined so we broke our last block let's make sure we get to our AFK position. We should start seeing our monsters, yes, there they go straight to the trident assassin.

This is exciting, so we know they are being killed because they are getting little dust particles. We've got withered skeletons, magma cubes, flaming skeletons, all doing their thing down there, the magma cubes are perfect, um, we don't really care about them, they'll jump onto the carts and sometimes they'll get to the murderous trident, sometimes they'll give a jump and they will come out of the way which is fine and they will jump right out of our spawn radius and new monsters will appear on top to maximize the amount of items you get. Make sure you have your three plunder swords available, so let's say your kingdom or server requires you to do so. turn off your farms when you are not around them, yes they can happen if you play alone, it's not a big deal to have these entities active, but if you have some rules on your kingdom or server, let's make sure we are following those rules, what we are going to do What we have to do is take out one, two, three, four blocks, one, two, three, four, one, two, three, four, and we will take out those four blocks until the end of our construction.

Now that we've got our four blocks out of the way, let's go ahead and start putting some glass in here all the way and while you're at it, let's go ahead and put target blocks right there all the way. that we have our first row of glass and our target blocks, we want to bring some redstone to our AFK position so we can control our redstone from there and then we will connect all our mine carts to that redstone, so come here, we'll start going down, we'll make a little staircase here, we'll probably find a cheaper way to do this, I'll just do it this way, so we'll go down and then come on, I don't like running into my own red stone, so I'll put this right here .

What we're going to do is put in a switch, turn it on, and then put in some redstone. here so we know we can go 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 and then it's over to maximize our redstone here we'll put a repeater that should light up and then we can go another 15 blocks one two three four five six seven eight nine 10 11 12 13 14. in this case I'm stopping at 14 because we're going to have to put an extender in here, we can't just put repeaters online because one of our carts won't turn on, so when we get the number 14, we'll go back from one to 13 and put four blocks, we'll take out some repeaters, we'll put one here and we'll put one here.

A light will come on there, here, here, so now we're going to reboot right there, so 1 2 3 4 5 6 7 8 9 10 11 12 13 14 and we'll keep doing this until we have everything turned on, okay? We have our red stone in place. Each target block is activated. We need to send a signal to our killer trident to shut it down. Now you will notice that the assassin trident is on but the lever is in the off position, which means no. Even if the lever is there it will still work unless we turn it to the on position so we are actually making a negative redstone circuit here so if we turn it off it should break it and it should come back on so that means if we have life in Redstone, that means we have to shut it down somehow before it gets here while it's up here, so to do that we'll just use our glass because nothing can appear on the glass, we'll go down. one two we'll go down again and that should put us in order even where our lever was now we'll come bring us down here we're still energized we can put a block here and then that's energizing the block and if we have a torch on the side it's going to put it out because is turned off.

Now we can extend a circuit this way, we can simply put a piece of red stone and a repeater. We have this should stay on because we don't have any red stone energized which means if it is off it is on just like our switch, if the switch was off then the killer trident is on, in this case we are knocking down the red stone energized, it will pass through this block. this redstone torch is out, so if we go ahead and break this circuit, guess what will light this redstone torch and then energize this little circuit which will then shut down the killer trident, so let's go ahead and see what happens.

Now take a look, this is off right now, so if we get to our rest position, we press this lever, we notice that all of this turns off and if we can get out here we can see that it's now energized, which tells us that the Trident Killer is off, so all of our stuff is now connected to Redstone, so we're ready for the next step. Well, Redstone is connected. We have our Trident Killer connected to a circuit. Now we need to place another layer of glass. on top of our red stone, this will create a barrier for our mine carts so the monsters can't get out and it will also keep our mine carts in now that we have our second row of glass or slabs, depending on what you want. wanted to do, you can put our rail system, so let's start with the activator rail, the rail, the activator, the rail, the activator, the rail, the activator, the rail, the rail activator, the reel, the activator rail, the rail, the rail activator and we'll take it all the way, okay, we've got all of our rails. instead, let's go ahead and grab our glass and a regular block and get ready to finish this.

Put it in our glass. We will break it. Make sure that's our spawn point. Place a glass block there. Glass block. Just break all these rails as we go in that direction, we can reduce our spawns and we'll just complete this. Okay, we have our other set of glass blocks, we have our limited spawn points and We have our rail system in the correct orientation, now we have our target block here, we will place our fence post at the end and now we are ready to place our mine carts to the bottom, okay? We have our mine cards in place, our redstone circuit is off so our mine carts are just hanging around being real, now we can take out the top block to help get our spawns started.

I quickly went out to this afk position, you can see all the the monsters just appeared now they are trapped in the minecarts they push them straight towards them they can't get out so now what we can do wow we have skeletons we have all kinds of things waiting for us let's take all we have to do is hit this switch let's go ahead and do it and that's it, thank you all for joining me in this tutorial, it was a lot of fun to do, I hope it works for you, be sure to check out the Groova Boys video on the mechanics from Minecart and also.

The Foxy No Tails website for those addons is pretty good, but thanks everyone, they appreciate it.