YTread Logo
YTread Logo

3 CPU-Wasserblöcke für Ryzen und AM4 im Test - TechN gegen Watercool und EKWB - Geld kühlt nicht!

Mar 30, 2024
I get greetings, I see that it is completely blue, I have it clear, but the theme is blue sky, of course, we are doing something to cool, water, cool, why will Dr. Lisa be like this soon, yes, the eighth is there, proud as crazy, and will present the Z3 to us. The new desktop processors for travel and of course we also want to be cooled properly, which is why I have three and four plates of water. I'm worried, especially this one. which is new as a new company from Berlin. I'll take a look, and no one else has it like this, Mr.
3 cpu wasserbl cke f r ryzen und am4 im test   techn gegen watercool und ekwb   geld k hlt nicht
Prototype in private, okay, the item can also be ordered from the web store, I will get 99 successfully. Well, it's not exactly cheap to go with her because here you can get her with four assassins per pack. This clothing is a well-known multipurpose weapon that is relatively good because it costs 65 euros, so it is a little less than this one so let's look here and be careful with the rice, where should we resolve what has a bit of comfort? So basically the 007 among all these water blocks for kids, that's the nickel-plated 240 euro ek quantum water blocks. second magnitude of delay, so the thing is almost four times more expensive again, of course, still 2.4 times more expensive than this day change, that's exactly what's happening today.
3 cpu wasserbl cke f r ryzen und am4 im test   techn gegen watercool und ekwb   geld k hlt nicht

More Interesting Facts About,

3 cpu wasserbl cke f r ryzen und am4 im test techn gegen watercool und ekwb geld k hlt nicht...

I just ruined the thing in the summer and you can see this refrigerator visually. Don't complain, so it has the charm of a small series, I'm going to say this is really good, it's well made, it fits, it's all precision anodized aluminum, I have something else and I have a battery cover on the top that It's relatively solid It hitchhikes ours is a little taller and it's okay when you're hot and cold hot and cold doesn't really mean anything the construction of this argument the battery is available but it's actually extremely thick so I think we won't have no problem here.
3 cpu wasserbl cke f r ryzen und am4 im test   techn gegen watercool und ekwb   geld k hlt nicht
Listen, I screwed it in, it went in as smooth as butter, you can do it hard too. I tried it, you get the fascia right. I also didn't have cracks, which are the things that are so interesting that others don't have or don't have yet, that are injected this way like here look at you now so when I go now to the name server we have the a or so that later on the sides from the hammer let's have the maximum of two completely disappeared, that was no different now here is an injector, there are no tattoos directly, so on the acrylic made plexiglass jets exactly that's what it was on these 23, so the second place then passes to Mario, so it is still available.
3 cpu wasserbl cke f r ryzen und am4 im test   techn gegen watercool und ekwb   geld k hlt nicht
So here we have the objector behind, that's not a laxative that works very well, there are squirts in these. I also say it completely, but this motherboard, the thing, is relatively solid and is exactly three millimeters. Then we see the fins, which are thin, 0.5 ten millimeters, and the channels are 0.2 millimeters, which is very thin, so it wouldn't necessarily fit here. That's one of those things, the well-known water coolers, you know, it fits alone, filling it, cake, it's like a porter, well, something that rhymes with fashion, you have to have it here, probably at some point they're going to put it up, like this that normal accommodating nothing happens.
I also tried it with 15.50 glycol there. There is nothing hanging. "So it worked, the reforms through, otherwise filtering from time to time works. Now I have measured a little. So that is also a little bit of the secret of this cooler, the federal government is strong, so I guess that of what you can Measure with, yes, it is less than 0.3 millimeters. The manufacturer does not spoil the joy and then actually gives the dimensions that he himself did not expressly measure, it is significantly less than 0.5 millimeters. The fins too they are relatively high and of course Vectus copper is also used here, so far it works, it is pretty well nickel plated and the back of the image sometimes has a satin finish.
That's a relatively good story, now we have the exhaust of a large part of one that is eleven centimeters longer is a whole mass, the thing is that if you look at 7.7 and 40 centimeters and what else do we need for 2.08 cm high. Then the typical AM4 helps, the typical size A4, the use of the Agro I' I've already said, you can use it, it's okay, it fits very precisely and according to the dimensions of the space like in Benz Clark and all this completely unscrews the first seng with an internal hexagon, so that everything works relatively well.
What else have you seen? In the January result, I don't necessarily address that it's doubtful you can connect to a principle where you can get it working, most motorcycles still have it, otherwise the cloud puts the controller on it or cuts it off, you don't need it . Relatively bad, it has a formal logo that you can often get to the right place, just press the print. It's a magnet, which is what we're still bringing up on the water blog talking about unless you drink, it fits, but we also have beautiful writing. on the original AM4 backplate of the motherboard But I still wanted to take it, you can see it.
I'll show you and at the end it will be pushed until of course it reaches the end with the spring. Down here. Now I'll go down to the ground for a moment and pick up the horses again and also the screw is all. When it is screwed it has a contact pressure of approximately 0.6 Newton meters at 6.065, then it comes like a stop so that you cannot turn it any further, it turns out that it does not fit perfectly when it is screwed well and in the end it comes off like this. In principle, I don't need any assembly skills, actually that's all. for this whole story and they say I'll have it quick and then I'll put something on it, but it will also look like the thing is assembled, as you can see my

test

system, what's behind snatching it 9 2009 I have a small possible reference wafer, and this part produces 150 watts.
This is how I set it up. Thanks to various precision-increasing overdrive

techn

ologies, you can set it very precisely or specify it and it runs constantly. So what did I record? Then I let the thing explode. and the secret of these people is that we don't want to compare anything with our small amount of comfort for 240 euros, after that I also screwed this in there or the water always passes at 20 degrees Celsius, that's the problem. 20 degrees is clear, very pleasant. I can get a very clean delta. I just can't mix luck. The problem is that when I do a cold run here we are at 30 percent as far as I am concerned and we have cooled it to 20 degrees and then it becomes more and more viscous, which means that for the mega deal it naturally decreases a little because I didn't want that and it's always good to have the same law for everyone, no matter what they found.
Before, the strong ones left the water empty, so it is pure, normal distilled water. The water is pumped very well, but it goes through companions plus a 20-liter expansion tank. I have a total of more than 30 liters in the circuit here and in the basement. It does this relatively accurately, meaning I can assume I've always recorded the water temperature, so the packet comes from our travels, yes, and then you can compare things beautifully. I did five runs each for each refrigerator with 170 liters per place. I went over a little bit of this effect again and saw what it does.
The differences were measurable although of course I made this whole beautiful structure at 20 degrees and passed it five times. It was reproducible, so I assume that the distances I measured here make them more or less almost congruent. I also agree in the end that we look at everything here, we see the curves. Of course, I changed the coordinates a little so that the private origin of the package temperature has reached 58 degrees in Canada. and the warmest is then around 61 .9 a little bit about that we see here is what is happening the coolest coolest only the minister calls stuck products has done it is the best of the three well a bicycle behind says uwe renz It's our friend the Hit Killer, that's really good, what's with these flows now?
And with these, I will say that it is a constant 20 degrees, what is a motorcycle? It's not much to know what you can't measure, but in reality you can almost push it to start badly well the worst reference

test

is the most expensive this is our clear and noble refrigerator this little nickel monster almost 240 euros I dare to speak of all this because you have to be very kind if you get a dad blog for 240 euros I understand So the prices stayed as good as I think it is tactile and it is a force to be reckoned with and it is very difficult to lose so I will say that like this It's how you like it, I also like it visually, but for the price you have to pay for the performance it offers.
Let's leave a space as a question mark. Now I have calculated the deltas. Let's take a look. This is what a bar graph looks like. Can you leave it? Then we have our friends set the heat to 39.54 is a little more, you can accept that the price is lower if it was because you want it to fit you a little better but also a little more expensive, well there is our little expensive friend 41 85 and if you think about it, a hit. I mean, it's almost two and a half courts in the schools, yeah, that's a house number, so at least when I say I have a high-end 25 cooler that does it again, I always had to blow dry or style, like that than two records.
In the high-end area there is a lot, you really have to say that and it is a verifiable measurement. Five long-term measurements lighten the burden of hours of running, so first you have to warm it up for just 45 minutes a month and then you can eat it all very delicious and then really get it. It is not necessary to test it for a proper cut because the results are reliable for me. Now, of course, I didn't have time because it was three days of bumpy work, because the work was going well. Then I complained bitterly and had the old Russian church and now there are three or even the ponies are terrible opponents of my studies.
Then I abandoned it. Somehow I had to do something else again. It's not how it all looks now if I actually do it with the logo, so again with 60 and then with 100 liters per hour, however, I just calculated it like this, the 170 again with a deeper meaning if I take it here now and everything, no matter what blog I take something for the graphics card and back then we go back to 100 which is the same The decision she should give here would be a little better. I wish I had such a decent bomb, not even her crying and Lambertz and representing 60 children. , a really smart one, so I don't have a 150 liter per hour one either and then I hear the pump halimate, so from that point of view check it out a bit, it has to be something about this refrigerator, I don't have to do it.
That was great, whether it's unrolling it and taking a step forward, we always make sure that common sense and safety of this test are covered, but hearts because it's cheap, as always, tawakkul, you can say yes and the big change in the question marks a bit of quantum comfort. It says that there are still 40 euros left, children, I don't believe it because you also talk about eating Frauke and then they still have money left over. Buy in that sense I wish you what we will see soon with a water cooler for a graphics card and we also have a Geforce RTX 30 80 Galaxy SG.
Also, Cave Story is still available as a single trial with air cooling, that's what I mean.

If you have any copyright issue, please Contact