Arrma Infraction V2, Setting Rear toe,..how to..Setting up for drifting.

Hey guys welcome back welcome to the channel uh yeah update on printing set up for drift and what he needs is what I have to do and well we're going to do this today but I have to get the new spell . It meshes there because I rounded it, right? I have an 18-tooth sprocket for the engine instead of the 15-tooth one. I'm going to put it in and that's the difference in the

rear

end, which is the original one it has. GPM right now and that's the one I'm putting in, which is a zero

rear

toe, I see a difference, um, and I'll show you how bad it actually is from the factory, so I've got it there.

I've measured everything, it's perfectly straight from here to here from the back and if I put that ruler there and if you can see that on the right, look at the angle compared to this line here where the 4 are Is there that which is zero ? See how to get to the center of the wheel. Look how far the toes are naturally from there to there. That's excessive. I mean, for

drifting

they say it's a little weird, so a little. I mean, yeah, 0.5 probably. there but I'm going to go for zero between zero and it probably says I'm going to go for zero um so yeah, I'll bring you back in a moment um so take the sword.

I have a few other parts on the way, but let's put them in there and then um uh we'll go up there so yeah let's do it so you can see the people there uh I just put the new pump swing arm bracket in place um and the zero tip, see the ruler there instead. that line, that zero toe on the back now, so same difference from before. I'll leave a photo here from before, although if you just watched a video, yes, that's one way to do it, so it's perfect. Perfect, now we're sitting better and I'll also project in front of the back, um, run toe out on the front, go one degree, two degrees, camp and then again Negative shift on the front.

I run about 0.5 degrees of camber, negative cam on the rear cam and zero degrees on the trailer I feel it in the rear um that's what I run we'll go I'll run that seems better I like the rear wing , I'll leave it on for testing unless you're overcoming overwhelming response in the comments for me to use the gt ring. I'm going to leave the bat wing on so yeah if you prefer the GT wing leave a comment below, like I said if it's overwhelming I'll return it. but oh, that one you don't know a little test speed test, but I've gone on too long because I don't want to make a very long video, it's a nightmare for you, um, what we're going to do.

The next video will be getting this 300K putting in the center of this, close it up a little bit. Now I have 100K on the back so it's much better. It will be, and I hope 10K on the front is loose, keep it loose. a bit, I have 10 spur drive geeks. I rounded up the number and in my opinion it has an 18 for the motor, instead of the 15, so it should be fine, it won't stress it out too much. Um, but I can't do all of this until I take some school parts to Parts because there's no point other than putting it all together and then taking it all apart again to put the pieces back together.

I have some driving stops that come with steering stuff. um and I need the engine mounting bolts which I'm going to get too because I'm out of them and I have one left so yeah that's going to be it so I'm going to do this video and I never want to be. I'll do all of that and then I'll run it at the same time on the same video and we'll test it so it's like

drifting

. That is the same. It's a good thing I did it about five months ago in a video. in mine and uh, yeah, so there's a couple of people now that have started to, you know, instead of mentioning what we're going through, isn't it just what you know and it's already done, so yeah, I'll keep an eye on all?

Yes, go back five months and you'll see my video when I posted. If not, I'll leave a link below if you get in touch for feedback. I love YouTube. The community uses a strange old place. I'm finding it. I know I like it I love it because I like talking to people I don't know I like showing people things you already know so it's nice to show a hobby enjoying what I enjoy I hope you enjoy I enjoy I've always seen it. If you didn't, I'll leave it there and see you next time. Thank you all for watching.

Greetings for tuning in. Don't forget to hit the "Like" button and the "Very" notification. See you next time take care people thank you all for watching thank you for subscribing see you soon goodbye for now goodbye foreigner