How to Make DIY ROBOTS out of Cardboard for kids with Ryan's World!

Hey guys, I'm just helping mom clean up, huh, I wonder who keeps leaving this here. Hmm, I just want to just put this in a trash can, a scrubber, so much thread and some cotton balls what are they used for? I'm going to do with all this, oh my gosh, recycle that. Hi Ryan, hi Peck. I know exactly what to do with them. What can I do with that? Send it in and then we'll

make

some super cool

robots

. A robot. No way with this. Alright? Back, good luck, okay, I can't wait to see what you do, bye, oh, thanks Ryan, ah, Peg, I just heard your teleportation device, yes you did it, Ryan sent me all the parts to

make

the books, let's start at our first place, the first step.

Building our Brushy robot is connecting the battery to the motor creating a circuit, since we are on the globe we have these parts lying around but they can also be found online or at most hobby stores. Building these Bots can be difficult. and dangerous, so be sure to ask an adult for help. Wiring the motor is the most important step to power our robot. We're going to connect the positive or red wire to the positive side of the motor and make sure it's nice and secure. then we're going to connect the black or negative wire to the negative side of the motor like this, now we're going to wrap it all together with a piece of electrical tape to keep our connections nice and secure, first we're going to grab our brush then we're going to secure the battery and the motor mount to the back of the brush using hot glue once again be sure to ask an adult for help especially when using things like hot glue now I am using electrical tape to secure the extra wires so they don't get caught underneath of the brush or in the motor.

Now we are going to hot glue our cork to the engine post. It is important that the cork is unbalanced or twisted so that when it rolls, turns, it creates vibration now this vibration will make our robot move, all that is left now is to add batteries now that we have everything built, all that is left is to press this switch and complete the circuit, look at it, go, wait, calm down, okay? yeah, first boat completed, actually package, we're not done with the place yet, huh, are you kidding me? This guy needs a face, this robot is cool, but you know what package he could use.

I have a great idea, we are going to use this cup, so just like the other robot, we will start by connecting our positive wire and our negative wire, here we go, it looks good and it is safe, let's try it, it sounds good, next up we go What to do is To make a hole in the top, be sure to ask an adult for help. Now we are going to connect our motor and our battery, so as we start with the motor we will have to be very careful while gluing this in place, the glue may take a little while. while it dries, so we have to be very careful not to burn ourselves and we have to make sure the engine is very straight.

Now let's put our battery in place. We have to use a lot of blue so that it adheres very well. Put it right here where we can still turn our lever, there we go. I'm going to secure the extra motor with some tape and it also adds a fun color, so for our counterweight we'll use this clothespin and hold it on. So, Ryan found us three markers, we have orange, blue and purple, so we're going to tape them to our mug, let's do the blue one first, then we'll do the orange one and then the last one will be purple.

Let's go and we're ready to draw. I could add a few more finishing touches and now we decorate, look at all that color, okay Bree, I prepared some paper for us to color. The good thing is that I go everywhere with my colors. I think I'm I'm going to start with maybe a house, oh wait, sorry Bree, it's not for us to color the butt, okay, wow, I guess this guy looks pretty cool and I'm excited to see what kind image makes, hopefully, something purple first. What we have to do to start coloring is remove the covers, here we go, look at those colors now we just have to turn it on and now we draw, removing circles from the table, let's see.

I think we need a little more color here. Perfect, look. In these circles, it reminds me of a spirograph and we need a little bit of color here. Alright guys, now color the rest of our paper. Look, he's moving, look at this cool pattern he's doing and he did it well. It was amazing, huh? It was fun watching the robot do his doodles, but can we do one more butt? Bree, well we have some perfect straws and toilet paper that will be great for our next place if you say so. Okay, Bree, we have all our materials. a racing car robot, well if you ask me, my first answer is always the same, let's decorate, the first thing we have to do is fix this toilet paper roll now that it looks like a racing car, next are these wheels that They need a little shine, now look All ready to go.

Now we're going to put some wheels on this race car. The first thing we will do is assemble our axles. Now we will use these beads and glue them in the center of each wheel. This will hold our axles in place now our axle will actually be made out of sticks and straws so we need to cut the axles one size and the straw is a little shorter this will allow our wheels to roll now that we have everything cut to size measure, all that's left is to glue everything in place and put it under our car, once everything is dry the straws should spin like this now all we have to do is build a second axle and once that's dry, put it under our car, now we are going to stick it on the bottom of our car using masking tape.

We have to be very careful to make sure we hit the axles straight and in the middle so our car goes straight. Now it's the complicated part we're going to use this on/off switch to turn our car on and off, so to do that the first step we're going to have to do is lengthen our positive wire because it's too short to go all the way through. through the car to the back to do this we are going to cut the wire in half and then using wire strippers we are going to remove the coating from both sides so we can join them together now we are going to take the two ends of the exposed wire and we are going to twist and twist and twist nice and tight and then cover it with tape for safety now that's nice and secure it's time to attach our switch, we're going to take two positive sides and run it through each side of the switch, we're going to bend the wire to make little loops and then secure it with more tape now that we have our switch in place and it looks nice and secure, it's time to wire the motor.

We're going to start by attaching the negative side to the negative side by bending the wire so it's nice and secure now that we're done gluing the negative side, let's connect and tape our positive side and there we go, hopefully we can get this. nice and tight with a little bit of tape so now that we have our circuit connected to our motor, our on off switch and our battery we need power aka battery so if we connect this we press our power switch and off and on like this in the next step. is to install our finished circuit inside our racing car, we will place it here so it can work.

The first step is to make sure our motor is attached at the front with enough room for our propeller now that it is in place. We need to make sure our battery pack is nice and secure in the back, all that's left is to connect the switch. Now that we have our circuit installed, I put the on/off switch on the back so it's easy to turn on and off. We have the battery, all the cables and the motor in the front, the last thing we have to do is put on our propeller and that's it, let's go for a test drive, did you hear the penguin, let's go to the race car, this place is spectacular, it was a lot of fun .

I think it's time we send them to Ryan, although I would love to play with them. I think you're right about teleporting the butts to Ryan. Goodbye Bots, there I am. What are you doing? I'm waiting for Peck to send me his. latest invention Hey guys, hey Beck, are you ready? The butts are ready. Wow, that's great. Peck, amazing job. What are Hardies? So I sent Peck a bunch of random things and he said he can make a robot out of them, so these are

robots

. Yes do it. make sure you try them have fun see a button around it?

I see a button here it's a lever, let's see what it does. Backwards, backwards, that's nice, oh, backwards, airplane, where are you going? Yeah, oh, we should name it, it's so cute, it's like. a hole Robo hole what's it called maybe bear plane because it's like a plane but then it goes backwards okay oh how cute hello bear plane okay oh okay then it's my turn so this one I found the switch right here let's see what happens if it works okay ready yeah move your hand move your hands okay just the last one let's see let me turn it on it's spinning it's coming towards us oh hi don't forget it can also draw two colors yeah okay let's spin .

Hey guys, real quick, check out these new Titan Universe toys Ryan helped my super family and friends win lots of fun adventures and defeat the bad guys. All new Titan eggs and Mecha toys available so you can create your own Titan Universe adventures at home. Grab Bag Microfigures Build your robotic toys at Walmart Target and Smith's, but let's go back to Ryan's World Hey guys, today I'm playing my favorite video game Pac-Man oh, I'm running away, I'm running away, no, I've lost That was so easy How I missed? Mmm I'm going to ask dad for help.

What's happening? Ryan. I'm playing Pac-Man but I keep losing. Ah, that's because of lack of concentration. I used to have the same problem when I was little. Okay, but what did you do to gain concentration? Actually, you chose the penguin train and focused. Why don't you ask Peck for help? Okay, I'm going to go ask the pet for help. Choose Are you there? I need help. Hey, Ryan, I just woke up. from a nap, how can I help you? I have been trying to play this game but I keep losing and dad said I have lack of concentration so I need to train it somehow, can you help me?

Oh sure, how about a buzz? wire super challenge focus game to help you train, okay, pack, good. I'm going to ask Bree to help with this experiment, in the meantime you should practice focusing and meditate, okay, pack up, it's raining, oh well, now that you're here, you can build the last buzzwire. Game Challenge Buzz Wire game using a simple circuit, let's build a focus and concentration game that sounds like a great idea, but first I think we should learn how to make a circuit, come on, a simple circuit consists of four main parts. conductor a power source an electrical charge and a switch to complete a circuit the conducting wire needs to connect the negative side of the power source or battery to the negative side of the electrical charge which in our experiment is a light bulb and a doorbell, then the The lead wire needs to connect the positive side of our battery to the switch and the switch to our light bulb and doorbell.

Now all you need is for the switch to close the circuit and Bam, we have power. This works because energy flows from the negative. side of the battery through the wire and to the bulb and doorbell, some of the energy is converted into power, the wrist flows through the wire and the switch returns to the positive side of the battery when the switch is turned off, the circuit it breaks and there is no power because there is an interruption in the flow of electricity, let's see on, off, off, now that you know how it works, let's start our construction right now, the four main parts of our circuit is this wire that will be our conductor this battery which will be our power source the light bulb and the doorbell which will be our electrical load and this wire which we are going to use as our switch now the pet is doing his midday meditation right now so we are Let's go ahead and start with the base and the structure of our construction, we will use hot glue and

cardboard

, meditating, so we will start by tracing all of our

cardboard

pieces to make our base and our structure.

The first part is going to be the main part of our base that's why it's going to be so big because we have to put everything on top and then we're going to make a small support for our base using these two thin pieces and lastly we're going to make the walls to the exterior, so now that we have all of our bright and colorful pieces, it's time to start assembly. We're going to glue everything together with hot glue. Now, if you are going to use hot glue, be sure to ask. an adult for help it's very hot I mean that's in the name I wonder if Brie is okay hmm the first thing we're going to glue on is the base of our game now we're going to take these yellow strips and glue them on the back like this now we're just going to hold it in place while the glue dries one side down one more to go uh oh, we're getting glue everywhere, soThat's why it's important to ask an adult for help now that you're nice and dry.

We now have our base built, all that's left is to add the walls, everything is nice and dry which means our base is built. Now it's time to build our circuit so we'll start by connecting our two positive wires that will go from our battery to our light bulb now we need a good secure connection so we're going to twist and turn and twist and turn until it's nice and secure, let's check it out, oh, that's really nice and safe, now let's route our combined positive. wires into the positive section of the bulb and carefully twist them around the screw, there we're going to bend it now that we haven't bent the screw, we're going to tighten the screw to secure that connection in place after tightening it. you should have a really good secure connection.

Let's try, yeah that feels good so now we have our positive wires connected to the positive side of the bulb now we're going to take the positive wire that we connected to our light bulb and we're going to connect it to the positive wire of our doorbell do this and let's go having to do the same thing twist and twist and twist and twist and twist some more until we get a good secure connection, so now that it's secure we're going to fold it in half just to make it more secure and then we're We're going to make it more secure. with some electrical tape, so we'll wrap it nice and tight to help keep our connection in place.

Next we will take our negative doorbell wire and connect it, you guessed it. negative side of the bulb we are going to do exactly the same, let's screw it around the screw and now we tighten the screw to secure our connection, once it is nice and secure we are ready to connect it to our board, so now we have our circuit connected, we have our power source, our electrical load, we have our conductor which is the positive and negative wires that connect everything, all that is left is a switch to turn it on, so if we take this wire and use it as a switch and connect it, the circuit is complete now let's take our circuit and glue it to the base.

Okay, everything looks good, but this circuit definitely won't help us improve our Focus, but you know, it will add a lot of twists and turns. Right in the middle of our loop, you know what? For this to be the best, this will take a while. Maybe he'll come back later, an hour later. I've finished all these twists, turns, ups and downs to create the ultimate approach. Challenge the Buzzwire game. This bad boy will need great focus to get through, as you can see. I made small holes in the wall for the cable to pass through. Now we're going to make our change for this switch that we're going to use. a straw and copper wire, so we'll start by cutting our copper wire.

Remember that children ask an adult for help, especially when working with wire and things like that. Now I'm going to use this glue stick to make a perfect little loop. We're just using it to shape our switch, there you have it, which looks like a circle. Now we're going to turn and turn and turn and turn and turn and turn and perfect, here we go. Now that we have our loop, let's put it through our handle, which is this straw, and all that's left is to bend the end up and secure it in place now that we have the switch, now we're going to place our switch in its place just like that now that our switch is in place.

We have bent the wire with pliers and are hot gluing it to keep everything in place. Now let's connect our coil to our circuit. We're going to use a negative wire to connect to the end of our coil once we have it connected. Coiled up, we'll hold it in place with some electrical tape, so after we have our cable nice and secure here, we need to secure our two negative battery cables and the coil together, so we're going to twist and twist and twist . and twist and twist some more and make sure the connection is nice and secure.

We will use more electrical tape to wrap the beginning of our coil, this will allow us to break the circuit and begin our game. Now my favorite part. decorations the decorations are ready we add a start line we add a focus meter which shows not being focused at all until the end and then we finish with the finish line all that's left now is to complete our circuit using these alligator clips So first we're going to take our alligator clip and connect it to the negative side of the light that's not going anywhere and then we're going to connect our alligator clip to the bottom of our switch making sure it has good contact. with metal like this and now completely focused on foreign, are we ready to start?

Ah, I think we are ready to try it, oh right, let's try it, that means it's time to focus, let's see the extreme focus to maximum pleasure. works fine obviously I'm not very focused but I think it's safe to say this works and is ready to go Ryan great the machine is ready to go let's run it in three two one hold on I really hope that helps Ryan. learn to focus yeah, hey Ryan, you're back here, you're still there, yeah, I've been waiting all this time, well the experiment was a success and now it's on its way, here it comes, okay, this is great, le I'll ask my dad. to train with me with me daddy come on whoa what is this look daddy this is the super game Ultimate Buzz wire oh choose he said it can help me train my concentration uh you first okay so I'm thinking you hold the stick correctly and you have to go through these wires without touching them, let your stick touch the wire.

I think if you touch it you make a sound and it's okay, okay, so I'll get serious now, ready, okay, okay, too, just firmly, it won't make any sound. Don't shake it right, stop shaking it, please, ah, please don't shake it, oh, it's okay, you're almost okay, you're in the second grade, oh God, that's why I lost, it's okay, dad, Well, it's my turn to train, it's that easy, guys. oh my god, it's not that easy, huh, oh my god, it's horror, oh, oh, okay, you already called so many times, now it's stuck, guys, my turn again this time.

I'm going to give you maximum focus. I'm not even going to talk after this. oh please focus, maximum focus, maximum focus, nothing, oh, isn't it pretty, okay guys, so we both need to practice a lot, but thank you, thank you Pat, for giving us this ultimate ringing device to train my buffer. Focus Ryan is super good at focusing a super revolver, oh this. It's a mechanic it's not good it's not good he finished it I did it yes yes about the device no you didn't finish it you know you didn't finish it Hi guys, I'm trying to find things to move around the house so I can play outside whoa okay this ball It's too big I'm going to go look for more things this is perfect and despite the ball too oh okay, let's go look for more items oh it looks perfect okay, let's go out now okay guys, it's the perfect time to play, wait Is it raining and there are storms?

No man I have to go back inside, oh man I can't believe it's raining outside. I have to think of something to do inside. I have an idea, maybe I can ask Peck, hey, pack, are you there? Hey, Ryan. I just woke up from a nap, how can I help you? So I wanted to play outside but it started raining so now I have to play inside. Can you help me with something to play? Oh, of course, you can count on me, Ryan, I'm going to do it. Go ask me for help with this experiment. What a nice day to catch some rays of sunshine.

It's raining, lucky for me. I never go anywhere without my umbrella. That is better. Oh, we better get in before there's more lightning, come on, it's stormy. outside, oh hey Bree, perfect timing. I'm designing a lightning experience. I know we could harness the power of static electricity to build a lightning machine. In fact, go ahead and start right. The first step is we need materials and I'm pretty sure we can. I found everything in the office, so I'm going to learn about static electricity after a quick power-up, now on the cake. I'm ready, strange materials, oh, yeah, hey, I got it.

Finish your drink and let's get started. It sounds good to me. An elegant scene transition for our outside driver we will use aluminum foil. The first step is to cut the aluminum foil along the flat side of the bottle. Now that we have it cut, we will wrap it tightly around the bottle making sure. don't wrinkle, then tape it in place and then we'll secure the top and bottom ends. Then we'll measure our cable to make sure we have enough slack like this and then Now we're going to cut it and remove the ends. When using things like wire strippers, be sure to ask an adult for help.

The second side of our wire will actually make contact with the aluminum foil, so we need to remove it all. Covering like this now very carefully, we're going to lay out our wire and make sure that the copper wire makes good contact with our aluminum foil now that it's in place, we're going to tape it down nice and secure next we're going to wear. the tip of the hot glue gun to melt a hole through the cap of our bottle. This will give us the perfect hole for the nail to slide through. Now let's glue it into place.

Here we have our cover. our nail is stuck, so the next step is to add salt water. The ingredients are simple, it's just salt, lots of salt and, oh, water, we'll fill it up until the tape passes. Our lid and Shake It Up are perfect and now we have our salt water made, but the clove doesn't really make much contact with the salt water. What we can do is add more conductive metal to make it longer and give us more surface area. area for our salt water to touch now because we're in the lab. I happen to have copper wire lying around, but if you don't have anything like copper wire or maybe a metal chain, you can always tape some nails and do it.

As long as metal is in contact with metal, it will work fine. We'll use our copper wire and state-of-the-art pencil to make our coils, so we'll start by wrapping them over and over again. and around and around, but we got smarter, so now we're just rotating the pencil, which requires a lot less work now that we have it fully wrapped, all that's left is to slide it in and roll up the boom that we're going to wrap tightly. our coil around the nail and secure it in place with some tape and now it's time to add our coil to our experiment.

Wow, and now we're making a lot more contact with water to conduct electricity. Now all that's left in our build is Add the ping pong ball on top, but since we needed to conduct electricity, we'll wrap it in aluminum foil. We need to cover the entire ball with aluminum foil and make it as smooth and flat as possible, so continue smoothing a little more. that should work when trimming our foil, we need to make sure we have enough extra to go around the top of the nail, then we'll squish it into place and secure it with tape like that now that we're done. our build, which means the next step is to charge it, push, are you going to charge it without batteries?

Oh, that's simple, let's use this balloon, wait, huh, how is a balloon going to carry you? We're going to use this balloon to generate static. electricity like this oh constant static electricity is generated when two surfaces rub together like this now in this case electrons are transferred from my head to the balloon now because it has more electrons the balloon becomes negative and my head becomes becomes positive, which, as you know, is the opposite. Attract so that when you lift it the hair will be attracted to the balloon look at that hair sticky substance now that the balloon has a negative charge we are going to transfer our negative charge to the inside of our bottle so now the inside of our bottle holds a negative charge which will actually push the electrons away from the outside of our bottle, so the outside of our bottle is now positive, but since things like to be neutral, we'll use this wire to connect the two charges together, which will neutralize both the inside and outside of the bottle to be able to charge it we need much more charge.

This is how lightning bolts are formed. Clouds are made up of water droplets and ice particles that maintain both a positive and negative electrical charge. Particles move in the clouds, they rub together, friction causes the positive and negative charges to separate which creates the static electrical charge, the top of the cloud becomes positively charged and the bottom becomes negatively charged because our business attracts the negative charge of the clouds. to join the positive, but it is very difficult for electricity to move through the air as the clouds continue to grow, the charges gain more and more power, eventually the charge in the clouds is strong enough to be released, the positive charge on the ground they will jump to meet each other and when the currents come together, they create a bright flash known as lightning.

This is the same lightning that we will see betweeneverything we need just lying around the office while you gather materials. I'll do an investigation ten minutes later. These materials are perfect. Where do we start? We start with the base. Excellent idea. Peck, let's build our face. Oh, now when we use. Things like scissors or hot glue, make sure you ask an adult for help, so we're going to be very careful when cutting our popsicle sticks into little squares like that. Now, once we have our squares like this, it's time to start from the bottom. from our base now for the bottom of my base.

I'm going to use these bright yellow popsicle sticks. Now very carefully, we are going to glue our popsicle sticks. Now we're going to hold them in place until it dries and then we're going to put hot glue on two sides of our square holder very carefully. Now we're going to attach it to our frame very carefully and hold it in place until it dries. This will ensure that our frame is nice and sturdy. Now that we have one corner glued, we only have three more to go, let's get to work, so now that we have all four sides glued, we're going to place our squares, you know what's next, we're going to add. more popsicle sticks to improve our stand glue each of our squares one two three four and add our popsicle sticks they should be good and sturdy so now that we have our base finished it's time to add the size and then we are .

We'll need to build a top, we should get to work, we're going to add a blue popsicle stick to each corner of our base. Now we need to make sure everything sticks up and down like this, that looks good, thank you, oh, that looks. The next thing we have to build is the most important part, the individual pendulums, and for that we can use marbles and ropes, so we cut our rope to the appropriate size. Now we will find the middle and glue it to the top of our marble. a little bit of glue should be more than enough and now our marble is nice, dry and ready to act as our pendulum and now we are going to do this for the rest of our marbles, it looks like a necklace of marbles, the pendulum marbles are ready to Assemble Newton's Cradle.

Okay, so we're going to place our first marble pendulum in the center, so we need to make sure it's nice and centered and nice and straight, and then we'll hold it in place for the moment. with a piece of tape, so let's look at that side, hold it in place like this, now let's get the rest of it in place, let's briefly finish the setup of the pendulum, look at the science behind how it works. Newton's Cradle is named after the famous physicist and mathematician. Sir Isaac Newton for his Laws of Motion it was not me, it was science this device demonstrates two important laws of physics the law of conservation of momentum and the loss of conservation of energy the law of momentumstates there when two objects collide the momentum of the two objects before collision is the same as the momentum of objects after collisions the law of conservation of energy states that energy cannot be created or destroyed but it can be transferred now let's see how these laws work with our invention, The pendulum falls on Newton's cradle, meaning it is at rest with zero energy or momentum until it is removed and released.

When we remove one of the balls from the pendulum, we are creating potential energy or storage and it will remain potential. energy until the ball is released once released it is now converted into kinetic energy or energy in motion this kinetic energy and momentum is transferred from the ball in motion when it hits the second ball which is at rest then the energy is transferred and the momentum from the second ball to the third, to the third, to the fourth and so on, once the energy is transferred to the outer ball, the momentum will cause the pendulum to swing up and down hitting the fourth ball and transferring energy and momentum in the opposite direction to this energy transfer. and the momentum will continue back and forth through the pendulum balls, yes, let's be careful, combo, the friction in the surrounding air applies force in the opposite direction and will eventually cause the balls to slow down and stop, it is that's why the transfer of energy and momentum doesn't last forever now that we know how our invention will work, let's check back with free, okay, the last one is in place and we're done, what do you think?

Peck Peck. I don't know where Peck is. but maybe we could do a test before he comes back, no, there you are, Pekka. He was finishing up and waiting for you to try it. What do you think he looks cool? I can't wait to see it in action. Okay, let's try it abroad. I'm back with the results. Okay, Pat, I'm ready. Show me your science experiment. Okay, come out when wonders collide. The energy is transferred to the last marble. Isn't it the best thing you've ever done? Have I ever seen it, yes, wow, now I understand everything, okay guys, thanks for watching my video.

Remember to always be happy and get up, goodbye, this is like an experiment with pets.