EXTREMES MÖBELMAKEOVER DIY

Hello, it's good that you're back. Today I'm going to show you how I earned 320 euros with these two small nightstands, which I also found in the bulky garbage, that is, they were free, and how maybe you can improve. a little your own vacation budget. At first I will take a look at the furniture that seems to impress. I must say there wasn't much to complain about. some defects on them were removed, so I have to say that I definitely have it with wood when I look at the wood tournament, so for me that always automatically means that this combo is removed or now in this branch two nightstands would definitely be removed.

Of course, you could also say no, I never know anything about myself. I must admit I'm a little lazy for that. It's too much for me, so it's usually for no reason. For me, it's actually always taking off my accessories first. Of course you can also tape them or if you're doing something yourself brush them if that doesn't bother you, everyone's job is different but it's easier for me. If I can remove all the accessories, then I paint, sand and whatever. Whenever I have something to do, I can drive faster so that at the end, when I put it back together, I can put the right tournaments in the right places.

So always. I write with an Edding pen where the hinge goes and do it. The place that is basically in the closet, that is, is now done here right and left in a place that will be screwed later anyway and then practically gone. visible because now I have two cohens here, so I only have one but two more written so I know which mode it belongs to. The next step is definitely to clean it thoroughly. I have done it myself in the past, but well, back then I only made the furniture for myself and not. Of course there is a difference when they go on sale, but it is very important to discard this furniture very well, otherwise you will get dirt and grime and everything else that is older in the years since you started sanding it, which can really cause it to become embedded in the wood, which can cause it to have no color, no rax, no money or simply have unsightly impurities in the wood.

I am constantly asked how I sand my furniture and am I not afraid that it will break in the process? Somehow our myth seems to exist that says I can't discard furniture, I have no idea where that comes from. , turns out I was someone who was very careless and then saved it by doing it and so I came to the conclusion that you can't, you might like veneers, you definitely have to sand them. Just do it carefully. to use the coarser sandpaper now. If you are not sure, just use a much finer paper over time until you learn how to proceed with coarser sandpaper and then you will have to be more confident, but at first if you are not sure. just take a tall tractor, we 120 180, he also went into 240 because of me, you are definitely on the safe side, just keep an eye on where you have already worked a lot and maybe you should I don't do that anymore at this point.

Go over it carefully with the sander and if my cat has dents or defects, our cat tried to fix it very carefully with the sander if you have the feeling that the tournament is already getting very thin and I'm not sure and then I prefer to glaze it and do it at Hand, that's the other option. Now I'm taking the wood because I woke up to fix the bruises on my back, that's really not rocket science. You then let it dry yourself and at the end you smooth it again with sandpaper and there is not much drama.

The parts where I know I'll paint them later anyway, I just give it a little sander work. It's even possible. To put the whole layer under, I only do the surface, I have to smoke it so that the new color adheres firmly to something and before the new layer of paint goes in, of course we have to remove all the sanding dust. so it doesn't mix with the color I used YouTube, I think the color is pink, I love you, I can't, but I think it's still cold and I have to say the quality of Hessen is really amazing.

I would definitely recommend you. I've said it in my previous videos, but the most important thing when applying paint is to really work in thin layers so you get a wonderful life, it almost looks like it came from the factory. so many thin coats instead of one thick coat to clean the accessories. I make a cleaner mixture of water and vinegar. I'll cook everything for a few minutes and then you can easily wipe it off and clean it with a fine swarm and then almost everything again but in this case I'll use a little bit of spuhler.

I'll paste everything here with Trabant. I don't mess up the bottom page in my new black color, basically you wouldn't see it, but I always notice that when a customer comes and doesn't just load a dessert or a meal into the car, they usually do a bridge too and then I can see it very good and I think the initial applications leave a deep impression, so" I'm just leaving it up to now, it's not a lot of extra work for me, so I get a clean result when you have to go out to your next project anyway to get the materials.

I can only recommend that you get lucky in a slightly higher price category because, to be honest, the cheapest version always leaves an unpleasant image and then looks like an orange peel, so it is not elitist but it actually makes the orange house to be completely disgusting and unsightly. invest a little more, but I always tell myself that if you take care of your materials you will get something out of it for a relatively long time, especially if your goal is to get fit and make a profit, you would like If customers like how they turned out, I would definitely recommend Invest a little more, it will definitely be worth it in the end.

What I have also gotten used to is that I also caress behind the hinges because I can. I always show it a little bit and I just realized that I hadn't done it in a while, but that bothered the others, that you could still see it a little bit, yes, it's easy, it's two minutes, no problem. and it is also easy to see higher quality because the drawers do not run completely smoothly, this could be because the sides of the drawers have already adhered to this space over time, so it usually helps to simply redesign the drawers with long sides and high. some, for example with a 240, I wrote that I had to sand it again at the end and then add wax again at the end.

Then the problem should have been resolved. I still had a very spontaneous idea: me too. I saw these old wooden forms lying around and maybe you could use them to create the design. To make it a little more interesting, that's why I've cut several shorter parts here to fit and where we also fit the drawers and now we lend them. equivalent to drawers. It doesn't help at all, you can also cut it by hand and this video is a few months old and I must say that if I watch it again now I will make it a little more complicated than it really is.

You need to use a different look. There is also a Journal express line and it is much faster. I could have saved myself from all this clamping and on the other hand I had big problems until the little pieces of wood were sliding back and forth. There are two tricks, but I didn't learn anything about them after the fact. You could spray it a little and then it wouldn't stick as much or that's my favorite variant. I still put a little super glue on it. all the corners and then it sticks right away, but the read had enough time and when it dries it has the advantage that it can continue working immediately and before the end of the day by removing the accessories from this water and vinegar. solution because I don't like to let them live in this solution overnight.

Since I had a really bad experience and unfortunately the accessories disappeared afterwards, I'm now happy that the drawer fronts can't reach. The first thing I thought was. To write nice, round and smooth again so it feels different and also looks better, I could just paint it with a brush, but that was a little difficult for me so I decided to use spray paint. It is a matte black color. In fact, I have it at Center Shop, I have to say that it is a very economical option. I have had the best experience compared to the construction markets, I don't know why, for some reason I am missing the video material, but first.

I put this second coat on, sanded all the sheets again with 240 sandpaper, very finely with a very fine, light hand, then blended the top and then did the second coat. At first you will have seen that when. I put my feet up, some of the wood at the bottom splintered. Now I find these two components in five boxes, which I think is really cool because it sets really well and doesn't shrink. About half an hour for it to harden well. Normally I prefer to let it dry a little longer and then you can sand it normally with the sander.

I have these feet, I bought them from the company and I have to say that I use them. very often for my projects Whenever I work with the brush I try to go over it with the brush immediately and avoid ugly brush strokes. It works very, very well and you can. After that, I can no longer see that I used a. kitchen at all, but I chose a different handle for the drawer fronts, so I filled in the old holes. You can still sing from the inside. That gave me the next reason, so I decided to do it all with duct tape. the sides again and then I also paint the inside of the drawer.

I hold a small block of wood in the place where he will spend the week. I do this to prevent the wood from splitting versus what is inside the drawer. drawers and then the leaves fall off and it looks just beautiful. Now the accessories are also uniform. I have a very practical piece of old wood here. Once I put the palecher on, you can always just lay out the attachments and spray them relatively evenly. everywhere. Here I also have it again. The driver in the downtown workshop is the same brand, I just called. Also with spray paint it is very important to leave enough space and apply it thinly. layers, otherwise you will end up with ugly noses and we don't want that at all slowly towards the finish line.

I have it at the end or almost at the end, let's say that the legs have the same color as the lid with a width that I diluted half with water so that it does not darken so much and in the end I have everything with one. I cleaned it with a cloth and then let it dry. I used to seal the surface to seal the Miss Pompadour bag. and my main advantage was that I didn't want to influence the color of the wood as much at this point as it would with the wax, it definitely would.

In case there are many more yellow directions, with this sealing, that doesn't happen with the drawers, but that wasn't so important to me, I wanted the wood to look nice and fresh and for the drawers to go in and out easily again. , which is also always very appreciated if you put a little wax on it. and keep in mind that these dressers were probably made in the fifties or sixties and are therefore still 60 or 70 years old, sometimes we can have something broken, like I do with Davis now. It was also made easy. I know exactly which team this piano belongs to.

I don't have to waste a lot of time to see which one is correct. This brand is there for just that and it makes my life so much easier. Now we are almost done They are both completely dry which means I can apply wax both there and on the inside of the drawers, this also serves so that the drawers can be moved in and out immediately and right at the end Still I make the old glass plate holders into the glass plates. Unfortunately I don't like them anymore, which means they are very rare, but I think this home page is a scam and first I will show you what the desserts are like.

We interrupted everything for a moment the dessert I got for free, the legs have a total of 49 80 receive two new flues for the two drawers together 56 and then I have several materials that are sandpaper film medium waxes green paint for approximately 15 euros because they all these are materials that I have anyway I didn't use anything at all so I put an estimate of around 15 euros so I put a total of 71 euros 30 on the desserts and then I sold the two desserts together for 390 euros i.e. , minus my material expenses, a little for a quantity. From 318 euros I receive 70 euros, which gives me an hourly wage of about 29 euros because I finished the entire project in about eleven hours.

I still have all my deductions because I do this full time, but then you have to look at the criteria for yourself. Then I'll finally show you how the two of them did afterwards. Now, of course, I hope you enjoyed it. , that you were able to learn something from it or that you were able to take something away with you, that you were able to just enjoy the video, whatever, I'm happy. You can hear from her if you have any more questions please. Bombard me with them so I can adapt the following video a little more to what it contains.

Real questions are a clear thing, so I'll say.