02 - introdução aos workshops - Montagem da bancada

Well, second class, then from the

introduc

tion to the

workshops

I am going to show you how I assemble my bench, the first thing we do when assembling the bench is pack all the materials that we are going to have contact with. , then everything that we are going to have contact with or the skin cleansing spray the ink the alcohol transfer gel if you are going to use it in the middle of the tattoo the Vaseline of a protected screen important here the door was closed so everything we touch during the tattoo you have to isolate it with the PVC film because then there is no risk of contamination, so the first step is this, I use this glass table, everything is packed and this will be my work area, this will be where I will leave my paint and it is important to remember that this area has to be left as free as possible, the less things there are here, the better because this is the place where our ink will be stored, some paper towels for us to use during the tattoo. so it is very important that this area is as free as possible whoever uses a slide font has to pack this little tip here on the button so that you can use it during the tattoo, right, it is very simple to pack it, just pack it there with the PVC film and it is ready, it is protected, the first step we do is to prepare the batochi stand, then the door clicked, that one is already here, it is already in the club, right, then we are ready to use the door here, no need when we are working with tattoos, but it is important because I am going to show you how to hold an a or e on the bench, if we do not have the we can do it remembering that the button should always be in the place where it came from, they are not sterilized so we always have to close well so that when we use it I will separate our four potatoes here when we use it or touch it directly on the table, what happens when we wet a needle, we can hit it and turn it over and when it turns over it makes a huge mess for those who do not use the door of the batochi, I recommend that you do the following, take a little Vaseline, okay, put it on. on the table and I take the lipstick and it just fits there, that's it, it's already firm, it won't fall off with the touch of the needle, since I use the touch stand, there is no need to do this but there is something we need to do first, which I normally do with a toothpick, which is how I pack it, it's already closed here in the glute sports area, so what do I do, I open a hole, right on the sides so that it fits better, I'm going to make a hole in two and I'm going to leave two without the holes, in fact it's going to stay there for you as a reference and I'm going to put one in for you without drilling it first so you can see what it looks like, so when I take my batochi and put it in, it fits perfectly in space, it's tight, it's firm, there's no problem with it falling off when I do it.

I don't make this hole, what happens is that I can even push it, it will rise and then rise every time because it is not enough to make a hole down there, so we make the hole well, we leave this area free for the button so that it fits correctly , now I'm going to start assembling the machines, okay, I like to assemble the machines first because then we can access them to see if everything is correct, the only problem with testing the assembly of the machines beforehand is that you have to have a lot Be careful not to hit the needle and not damage the needle, then what am I going to do?

Ok, once this is done, I'm going to separate my needles, these needles are already open, I went to record. the other mall and I couldn't, I forgot to press the rec so I left my painting needles separated and behind, ok, I'm going to use the metal nozzle so you can see how it works, so when we open the toe and the needle we have This option of this thread here, mine, we are always free to pull here, it is to pull straight here, if you are going to open it using force, it is important to remember to never use force. on the beak, you can apply force here from behind and tear it here, okay, and then there will be no risk of damaging the tip and my metal beak, right, and the needles, same thing, the needles, it already comes with a case that We can take them out, but if we force them, we also always force them by the art above, never by the needle so as not to damage them, now, this is how it is done with the needles, always take care of the tip so as not to damage the tip, okay, with our The same thing happens with the needle, I'm going to take it out of here and leave it separate, okay, come on, like this for the first assembly of the bobbin machine, right, it's always important to have access to the top rubber, it's not loose because If it is loose it does not do its job, which is to soften it a little and force it. make it come back softer, so that that doesn't end up happening, we always leave it loose here because how we are going to attach the needle to the toe, we already have it ready, so let's go, I have my Needle remembering here on the needle, the welding of the solder is always down, to the right, and when we lift the needle, it comes backwards, so we give it a very slight turn, just so that it can make direct contact with the tip. something, which is the following, when we place it we never force the needle against the tip because when we force it we run the risk that some small part of the needle hits some point and bends or becomes dull, the thread has been lost something like that , then we place it very carefully until we reach the bottom and when we reach the bottom and when it is engaged in what we do we simply release it until it comes out, through the tip it came out through the tip. all good ok ok I'm going to go look here at this space on the toe, if my mother-in-law is looking down, the rod weld has to end here, okay, and then the needle weld has to be down , which is where you will get the ink and carry it, right, ready, I'm going to get an eyelet, it is important that this balloon is always changed, it is very cheap in stores, so I can buy a lot, so place the eyelet of the lens this way.

I already know which direction my needle is. I come with the machine and it looks like an open screw, right, I put it there as soon as I put it on, I pull it. up to hook it with the right beater, it hooks with the beater, here I can adjust the depth of my needle, I'm going to leave 1 m outside more or less because when I make the stroke, it will come out a lot. and that way it will return and bring enough ink to load it, once it is level we press it, we close it very tightly, it is not necessary to force it much, okay, but just leave it firm and we have the machine almost ready, what is missing is our elastic right?

Our elastic will already be used here to hold this needle, the elastic is placed right in the middle here and sometimes when the elastic has already been used, let's see what we can do. do it, we can turn it like this to force its elasticity a little more and give it a second turn, what's wrong with this, it will get stuck a lot, boy, okay, then it will cut the machine a little more, but go ahead. On some machines it is necessary to do this if it is not necessary, all the way around, what can you do?

You can take it out, twist it and snap it into this part of the line up here, because this little part up here is going to give us a little bit more grip because we already have the strength that we need to hold this rubber band correctly, it's used to see how he hits, he will always hit straight, he will always hit straight, he will never hit like that, understand, he can. Don't hit like this, otherwise the whole line will change, so let's do our machine the other way around. The bent one, there are some people who like to bend the tip of the needle, but we can never use the tip of the needle to deliver it. on this side here is always the welding side and very light a slight and real one just so that it is lower Touch the plastic one, it is easier, just let it fall and everything is ok, remembering that the welding will be down, right on the needles, so everything is ok, the machine I use is rotary, it is strong and has a support system on the rod, so when I put it on I just give it a small click and it is firm to be able to put it on. up there, it fits there and I'm just going to give my son a little bit here, ready, it's ready, now I'm going to measure more or less the depth of the needle and if we're going to do it later with more precision, but it's just to have an idea of ​​where we are going to do our tightening since our machine is assembled, when we have the machine ready we must go to the price cable to turn it on now and do the test because I like to do the test first because if there is any problem if I have I have to make some modification to the machine, make an adjustment, something I do at the beginning of the tattoo and not when I am ready to start tattooing. , but that's also a personal taste, okay, come on, so to protect the clip cable, I'm going to use my clip cable for the trace machine, okay, it's a common cut clip, it's not RCA, and these here are the clip-on cable protectors, okay, they come with one side closed and the other side open, right, that's ideal when we put it here, there's still a vacuum here, but it can't fill this vacuum, so, What we do is cut a very small point here, on the right, and on the open side we give it a very light surprise, blowing here, let's make me Come on, I left it, it's easier to fit our clipcord all the way, so put it there, just push it, we always put it, we point out that it goes to the source first because this other side we are going to use to protect even this part here, which is where we are going to have contact with the clip bead, right, that is what we do, we make this fold here on ah, okay, and we always leave a little bit of space here, this space is where our tape goes, so you can use masking tape, you can use Put some tape of your choice there and it is already protected, we are just going to leave the clipcord firm here, ready, our clipcord is protected, we can now turn on the machine and remembering that the clipcord has a positive side and a negative side, it is important to identify this, the positive always goes on the bottom, this is what what we do with this machine and we always check if the elastic is strong enough to prevent this part from shaking and now it's perfect, I have my machine ready, okay?

Now I can put it aside, remembering that when the machine is ready, we always have to be careful not to hit the needle anywhere, not to touch it in one place, mainly because it needs to be in stereo and it needs and can't be damaged, right, same thing. Now I'm going to do it with my clip cable, but well, I'm going to turn on my machine, then I'm going to plug it back in here, I'm going to lower the voltage a little, because it's treatable, it's going to work differently and I'm going to see if everything is okay.

Well with mine, the needle, its measurement, and here it is great for me, it comes out to about 23 mm. , okay, and I already have my two machines ready, what I am going to do now, I am going to do that process of taking the Vaseline, the Vaseline, we will do it in vain like this and we will leave this little mole. open part because when I go to get it I'm going to use a paper towel, I open it and then I come and take a little bit because if it stays open during the procedure the greater risk of contamination will have to be put.

It's outside and no, it's not worth it, you can pack it with PVC film too, but if you always use paper towels, that's fine too, so we come with a toothpick, always a new toothpick, okay, we come with a toothpick and I take one quantity and I leave it there quantity on the table, well, save our Vaseline, I'm fine, another important thing to have is a small cup with distilled water, here if you want to dilute the paint. or something like that, you can dilute it in water, I use this little cup because I use a little bit of dilution on the needle and here on the needle only when I clean it from one person to another, but you can get that little bit. a little bigger cup of coffee too ok now I'm going to put the blindfold on some of you who use it.

I don't know if everyone uses it the way they like, I think the blindfold is very important because it's made of a little bit of fabric. He ends up not taking as much Vaseline, it doesn't slip, it's rubber, it ends up slipping at times, okay, that's how I always end up using it, it's very easy to use, a little piece comes off like that, it depends, if you want to make the little one fat, you can take a little piece a little bigger, okay, but then take a little piece and put it in your machine, always making sure that the needle doesn't stick anywhere and it's self-adhesive, so what do we do?

It's on itself, it's like Velcro, it's similar to velcro, okay, and here it is already stuck, oh, so I'm just going to stretch it so that it's sticky, okay, finished, press well and leave it tight, hello, we already have our machine here ready to work, working with the appropriate bandage, all this is already done. As the last step we use the paint. We are going to put our paint on the buttocks of everyone we are going to use but a very important tip about paint is the following whenever we are going to use paint we first have to protect our bench, that is why it is ideal to put a paper towel on it, put the door, hit it with any paint that falls here, it doesn't make such a big mess, okay, and then we come with the paper towel, we always leave one aside because when we get paint we pack it up.

Everything around it, but this upper part is not this part. People never face it, they never fear that they will always be free because that area here is an area that people can contaminate, they will contaminate or beco and there they end up contaminating the entire country by planting crops that Before using ink, the item that I remove from the ink lasts for about 30 seconds to 1 minute, sometimes even more so, notice that the ball of the ink also releases or in this case, as I am using an ink that I use for training, it is not Meio vazia então ela vai bater bem easy but it is important and I saw this bolinha batendoWhen you tinha more wait this bolinha bat with som more opaque assim more hard né então feito isso tá mexeu quite a ink to people see with paper towel stick the pontinha da ink open the deixa ela pontinha and when people to place people do it like this and I always put a finger before and let it go clicking there because it is so why do it in another way for example to throw here just like this or clear it like this or something like this and I don't have as much control and that's where I might end up leaving. a ink for the sides or in the worst hypotheticals costing a ink ali em because people can't cost a ink because when people stop reporting when all that ink is going to create a emptiness inside and that's when people cost a ink they're going to study Once again, I'm going to use contaminated ink and people end up having to discard the entire tube, so it's important to always place a finger as it is packed or you can place my finger as you wish, but it's always better to place a finger and leave it to press itself. thing with diluent with everything that is related to ink because it cannot cost ali certain bom então feito isso chegado our machines coil machine ela tem que ser com a beat da solda reta a beatada da release tem que tá assim never assim certo ela tem that you must always be quiet and that everyone needs to check the machines or that people must separate enough paper towels or paper towels from a cantinho longe da onde vai passar with the ink left from the cantinho tranquilinho that it is going to be useful for a people do not need to glue every time the paper roll of paper towels then you end up leaving several items separated in pedacinhos that when you need to glue a new one you just use it and everything is certain to use the violence called that when you change from one to another item that clean the water for it do not carry and after cleaning the water you have to throw away some paper as well and let all the water come out because it feels like the water is going to influence not take two more details than other inks logical that with a colorful everything just as well fun é uma form so então and isso galera sente because that amount to less bench you can change the jeito de vocês we can mount as formis more calm for you but it is the same way that it amount and from now on to people já segue for tatuagem when they have more of A needle plus a needle number for the machine is always left to use this number after the needle is dated and after assembly with new luvas is certain of the shot it is kept and the boot does not boot or the new needle is likely to happen frequently when people tattooing with various types of needles but it is important to make sure that this area here is our work area and that it has to be taken care of so as not to be contaminated by anything certain that it has been done from here and only from here to tattoo and everything is true