fletching arrows with mfjj!

tip   and then there's a button here that you can press to lengthen it and get it to where it's near the end, but the purpose of this is to create some tension to hold the arrow in place so that it pushes it back into the receiver, that's what That's like, if you want about four to six inches, that glue probably spilled all over my hand, oh well, that's pretty much how you set it up, so let's put just one here and there's these little black ones. and reds. lines on the clear and you want to line them up with that consistently every time you see them back there, we're going to do a little dry fit here just like the victim burger, you're going to want to put it on first and then rotate the wires, so we're trying to put the maximum helical because I'm a big fan of that.

Look, we can do here and rotate it where it lines up with the arrow over there so we can push it and then rotate that guy. if you look at it there, come on, push hard, looks good, let's back up a little, there you go, all good, looks like all I can do and still get a good stick. I look pretty good. It's okay, no glue. there and it still sticks, look at that, so a little bit of primer, a little bit of glue, spread it out nice and here we go, push that in there until it touches firmly, make sure it's all the way in and stays in the receiver. okay, looks good, okay, we'll leave it alone, let's go back to this guy, which has probably been done for about five minutes, turn it out, you'll see that, push forward and turn it to the right, remove the cap and pull of an open feathering jig and when you leave it there for too long you get white residue like that before you have a chance to clean up the excess glue if you get a Q-tip we don't take but if you just use the q-tip, wipe it off, you have all three veins with a really extreme good propeller, which is what I like and I really think it makes the biggest difference in broadhead stability on a left-hand propeller.

You can do the same thing with the right one, so this The arrow is ready, here are our straight and hamburger arrowheads, open the clamp, take it out, take it out of the receiver and put it straight in there very well, so when you went to do a second one arrow, rotate it to the left, take another vein and let's go. Go ahead and work them up, take note of how long it took you to lift that one versus these, these take a lot longer but they are a more precise tool with more adjustability so there is some give and take so let's go to go now.

I'm not explaining what we're doing, I'm just going to put these last two very quickly on each bit of glue, spread it down and as you push it in, give it a good push while holding the arrow so the arrow doesn't move. okay there, so it should come out, we should be able to turn it again, another clutch there, primer pencil, little glue, slide it in, push it in, keep the arrow in while you do it, give it a good push, back here, so actually we do. we sell everything you're seeing on the table here we sell the feathering templates we sell the veins we sell glue we sell primer pencils even allen wrenches uh we'll put links in the video here for the feathering template so if you decide which one you want you should be able to click in taking you directly to the website for that, every time, sorry, one more here is not a great multitasker, so be patient, everything on our website is 90 and up, shipping is free, usually no You never run out of stock of typically feathering jigs or veiners or anything like that, so you should be able to get yourself what you need relatively quickly.

One more vein on this guy, spread it out a little bit, there you sink, be careful, that's why Hold the arrow when you push it or it slides, so okay, that's your straight right heel collection and that's your left, done , there are three

arrows

in pieces, simply and carefully, take it out of here and that is your right helical arrow. of the vane master pro which is a lot helical it's almost as much as what you'll get on a true helical jig so if you want an adjustable this does more than it will do but it takes more time but there is adjustability.

I mean, you can do a right, you can do a left, you can do a straight and it's all integrated, so we'll do another video here in the near future on how to build a perfect set of

arrows

that match the grade, etc., how do. They actually weigh the same thing to do to get a higher level of performance from your arrow but like I said visit the website and check what you need here we should have links at the bottom feel free to comment give me like and subscribe please. We have almost 5000 viewers, it's pretty quick to address that for us.

We are very excited. I hope I can reach you more every day. Send me a message. Contact me if you have any questions. And thanks for visiting our channel. I appreciate it, we will bring more content quickly.