Hair Extensions Bead weft or Quick weft NBR Handtied

Hey guys I'm going to make an update video of my

quick

bead

ed weave so what I do is I start with the

hair

style which is a strand of

hair

like this and you can do just one or fold it into two pieces and do it. thicker either way works great. I do both so I'm going to start with just one because it's a little bit easier to show so take my

weft

if you part the client's hair you can do a part or a straight part get my wife to measure it and then I. I cut the edges I need to fit the hairline.

I take my clips to secure it, like this and like that on each side and I take my

bead

ing tool, my rat tail comb and my player to hold like this. How I start is I have this side secured with the clip, you remove this side and I start in the middle, so what you want to do is take a section of the client's hair and lift it up, take your

weft

, put it back and secure it. instead, it's easier and cleaner to work with it that way, you take your top piece, your top section, so what we're going to do is take a section of hair from underneath the weft and a section of hair from the weft so you have three pieces, three sections, you have a section of hair, a section of the weft and a section of the client's hair from the bottom, so essentially your sandwich places the weft on the client's head with the client's hair, take your beaded tool like it's sliding over a bead now the trick here is don't overtighten it if you overtighten it and hold it it's going to stick out like this so what you want to do is pull down move the bead where Don't be too tight, just under the weft and hold it flat.

You can go this way or that way. I'm going to go this way because it's easier for me to reach it. Take that off. Take a section of the client's hair from the top. You can lift it while belaying. your left back take your top section, thread another section underneath and include a small piece of hair from the weft that way it prevents it from sliding back and forth, you will pull it down so it is neat and tidy, thread the section a your pace, pull the hairs, you can pull it down and slide the bead to where it is just below the weft, so place a flat section of the hair section from below including the weft, just keep it secure, read your bead, take out some of the loose hairs so that it doesn't pull or damage any of the clients hair, pull it down move the bead up a little and cut it so that it lays flat always keep your sections flattened so that it is safe this will not It's going to go nowhere and you're just going to keep going around until you make the edges.

I have another video I can link below to show how I secure the edges so they don't come loose. I always make sure to pull the hair so it's flat and straight at the top of the bottom because this is the top of the client's hair, this is the bottom of the clan's hair and this is the extension here, so we want to make sure After they are all together and leaning back, now you can see that it is safe and not going anywhere.