YTread Logo
YTread Logo

Heliox to Servo i tutorial

Mar 22, 2024
This is our video to demonstrate how to put helium in the fan for use with

heliox

. First, of course, you need to make sure you have everything you need, including a

heliox

compatible ventilator indicated by the red label that says heliox NIV, the helium tank with the bag. The supplies in the bag that were taken out would be the hose for connect the two and a wrench. Yeah, the connections are to tell you to put your fingers on it, so to start, we're going to disconnect this from the tank, we're going to leave the regulator on, of course, take it off.
heliox to servo i tutorial
You are ready to connect the hose, the hose connected with your fingers seems to be a decent keel, you can adjust it with a wrench if you want, go up to the fan, open the door down here, we have our adapter set here, connect the helium to put that at this point we can turn on the helium here turn it on see because there's helium there and now we can do our change from air to helium or the helium and oxygen mixture we have the 80/20 mixture so I'm here we can pull this down , it moves like this and that allows us to disconnect, so we will lower the air.
heliox to servo i tutorial

More Interesting Facts About,

heliox to servo i tutorial...

I'll try it and then we can push this one up and now we're connected. We have one more step, we have just held a fan, we have made the change to helium. To start, press the menu button, come here, compensate, compensate with the gas type and then we have a message that says, make sure the helium is connected before compensating and it is so we will say yes and now it says that the machine fan is offset and to check our settings, we will now that we have made all the changes, we have an indicator. Up here it says that the helium will pass later and now we are ready to go back there, so to do that, all we have to do is reverse our process.
heliox to servo i tutorial
Come down here, just plug in the helium just like we did with the air and then we can push. the air comes back on and now we have to tell the fans that we're running here instead of helium so we'll go to the menu again to offset the gas type and make sure the air is on before we offset it so we say yes and our indicator. Up here that previously showed that the helium was gone, now we're running directly here instead of you and that's it.
heliox to servo i tutorial

If you have any copyright issue, please Contact