TOP 10 DOLLAR TREE WALL SCONCES OF ALL TIME!!!Jan 31, 2022
I hope everyone had a great Christmas today. I will show you my top 10
sconces. I hope you enjoy. Stay safe and happy new year. remove the stickers and hardware there on the back of both pieces that way I can paint them I'm going to use some apple barrel white paint and matte and I'm just going to give it a good coat and I'm going to go over it with some of this hazelnut chalk paint and I hope I don't spill it, so I'm just going to stir it really well or shake it and go over it.
Now I started using the same brush that I was using. paint the white but it doesn't go on as rustic i guess its better to use it as a real stiff bristle brush i won't change in a second i just start using this and you of course don't have to do this part you can paint it the any color you want i just wanted to give it a rustic country like look so now you see i changed the brush and added more white paint to one side because i needed to brush it up a bit because the other brush just made it show.
I don't know, it looks weird, so I'm going over it with this type of brush now. and these kind of brushes i mean of course you can find them anywhere but i found this three pack from walmart uh different sizes for a few or couple bucks now that i have them painted the way i want , I'm going to use them. this
treeburlap ribbon i'm going to cut two pieces for each frame and for this part you can use any type of fabric you want i'm going to skip my breaks i'm going to make mistakes i'm going to skip my breaks i'm going to make mistakes it's going to be me I'm going to be someone else myself I'm going to be myself I'm going to be someone else I'm going to skip my breaks I'm going to make mistakes I'm going to skip I'm going to hot glue the burlap now and I'm just going to use the glue on the back of the signs and I'm going to use it too I think I grabbed another brush or a craft stick and just go over it because I don't want to burn my fingers on my tin no nothing can break me and you see those two holes where I remove that hardware on purpose I flip the sign upside down to cover it with the burlap that way i won't show i'm not quite sure what i should do this is why i'm leaving i have both pieces of burlap taped in there now i have some dollar tree tacks c As you can see they're gold first what I was going to do was actually push them to the sides right here on the frame but when I started to do that it's too hard to push and I really felt like I was going to stab myself.
I didn't think it was going to go all the way in. the one where it didn't and then i would end up stabbing myself so i decided not to do that but since i already had this planned in my mind of how i wanted it to look like as you can see i barely push them just to see how many i need i used 11 on each frame so once i figure it out i delete them i have this little piece of cardboard that i will glue them to and then paint them white so i will just use my white apple barrel paint but it would be perfect to use paint on spray so some
times i get comments about my nails y'all these specific nails i have on right now it only cost me like five or six bucks to do so i've been doing them lately not gonna lie of course There are
times when I still like going to the nail salon. but I've been doing them myself and they usually last about two weeks there are many things I like to try for example like my nails to see if it's worth it if it's cheaper if it lasts a long time then I remember doing my nails for a while now and they didn't last but this time i found something where they last and i love saving money guys i'm sure you all know how that feels i'm such a frugal person so every time i figured out how to do my nails myself and they lasted the same time for the same amount of time t last from the nail salon except I'm paying at the nail salon like 40 50 dollars for my nails and these are only I'm paying like five or six dollars I get so happy and excited that You know save money as well as you can see the tacks are dry and what I'm going to do is I'm going to take my stem cutters and just cut the needle part out and then I'm going to pop it out I'm just going to hot glue them and another idea s I'd like to use the little pink beads, as half beads, I guess you can call them they're dollar tree so they'll stick flat so you can easily spray paint them outside and then bring them in and hot glue them on too so that's another idea I you can do so let me tell you the few tips i have if you want to do your nails yourself what i do is go to walmart grab a pack of nails i like now i buy the ones that do not have the adhesive they come with the glue those are just the nails i'm using maybe that will help them last so i g clean them myself i file my nails with the little edge that comes with it and then i use the kiss glue not sure if that means maybe it does matter i have never used a different type of glue i always use the brand name kiss glue and my nails last guys so thats the few tips i have if you want to do your nails yourself lastly i will add is These dollar tree flowers so I think I picked them last year and this is the one they remind me of tulips so I really like the way they look happiness don't let them tell you what you feel or who you are , so I'll just remove everything including the little round oval sign where it says welcome to our house it's made of cardboard so I'm going to remove that so I'm also going to use this dollar tree cutting mat.
I'm going to use the cutting mat to basically create like a little pocket at the top of the arch of the window. so i'm just checking how much i want to cover and then i'll measure it and tell you. Exactly how many inches did I cut, so it's about five inches. I'm going to cut that out and I need two of them as I have two of the arcs through my cigarette so now I'm going to take them outside and spray paint them. white flat spray paint now I'm going to put it right here on the end I'm going to wrap it to the front and around to the side and I'm just going to see that this is about how much I need so I'm going to mark that up real quick with my pencil and then I'm going to show how long that is it's also about eight and a half inches so I'm going to mark it there and now I'm going to cut that piece to glue this on I'm going to use a little bit of e6000 and my hot glue so as you can see this is the last one time i can probably use this e6000 i need to buy another one so what i'm going to do is add some of that in the center of the little arch of the window and then on the sides i'll add or on the top and bottom i'll add the hot glue so basically the e6000 is for a long lasting hold and you know a lot of us use that for crabs and then hot glue of course it's for this time because it dries so fast so probably If you're wondering, well, why couldn't you just use a poster board or poster you know? the dollar tree or wherever and you can do that too i thought it would be fun to use the cutting mat so i knew i would take some of this dollar tree burlap and add a trim to each side so I'm going to cut out a piece and then we'll add hot glue, so even if you don't want burlap here I would recommend using some sort of fabric or tape, it will help keep the cutting mat in place as well. so I'm going to add that strip right there with hot glue and then the rest I'm going to add to the back and just fold it over and add more hot glue that might protect us now I'm going to add another piece of burlap to the bottom and this part you can decide how much you want to cover on the bottom so i'll calculate about half and then cut two str ips one for this one and one for the other little window arch and yeah i'm just going to do the same thing and add hot glue for the piece bottom we're doing about ten and a half inches I tell myself as I say now I need to add a background to this so I'm just taking another piece of burlap at six and a half inches and I'm going to hot glue it to the bottom and I'm sure that Now you can say that I use art. gluing it that way doesn't get my fingers as much glue and doesn't burn and then the opposite sides where those other two pieces stick out I'm going to add hot glue and just glue that inside the little pocket now I'll trim the edges of this bottom burlap piece that we added the bottom edge earlier and then i'll hot glue the rest of that underneath so i just hung them remember these bows have a little hook on the back of place them where you can hang them with a nail or you can add command strips like i do all i did was add some lavender dollar tre e florals in there diy number three i'm going to make four lollipops out of my dollar tree craft sticks to make these mini lollipops i'm going to lay five flat like this and i'll cut the ends of each one using seven craft sticks total for a little lollipop so I'm going to lay one of them horizontally and then glue I'm five on top of those and to finish the palette I'm going to hot glue the last craft stick together so I have all four of my finished palettes I used 28 craft sticks now I'm going to go ahead and take my hazelnut chalk paint and paint all four I'm going to use two of these cardboard containers that I found at the dollar tree and I'm going to take the lid off and cut the bottom of the container in half so I can fit them into each of the popsicles it was very easy to cut just making sure try to keep the line as straight as possible and don't tear it, just make sure you have some good scissors, so I'm going to hot glue it like this first.
What I'm going to do is just add hot glue to the bottom and put it on the paddle and then to hold it in place I'm going to add some dollar tree wood dowels. I am using my stem cutters to cut the taco. and first i'm adding one to the bottom on the inside of the container so the pegs are basically just to connect the pallet and the container and it's also a better hold so i'll add hot glue there and put it there just this on the bottom would be perfect because all I'm going to do is add a little bit of greenery and flowers in some of the containers so it's not heavy at all there's literally going to be no weight at all here but sometimes I like to be a little too much extra and I'm also going to add pegs to the inside of the sides, so here I'm just showing you what the pegs look like once they're glued on. now i know what you're thinking why didn't i paint the container right?
I looked for this neutral video, that's why I didn't paint it. I'm using a piece of foam board. I'm going to make a sign out of this and I'm also going to use this cocoa liner from Dollar Tree and what I'm going to do with this is cut it in half and we'll use it on the foam board piece. I'm going to use my L ruler to help me cut out a nice rectangular piece, so I'm going to score it with my pencil and then we're going to use a box cutter to cut it out. The easiest way for me to cut a piece of foam board is by using a box cutter like I mentioned, but I am, by the way. using as a i don't know a type of safety box cutter because once you use it and then lift the blade it will go back in so i have to hold it in place with my thumb the easiest way to do it is to score lightly and then once it does I'll go all the way through with the blade and it'll come out better. it will be bad if you try to do it.
I've been using foam board for a while now and yes if you use scissors it will look crazy so as you can see once I cut I have to. use my sanding block just a little bit on the side very carefully and lightly because you don't want to mess up the coating on the whole foam board and some of the framing is messing up and i still mess up a lot even though i've been creating for a long time time and then you know I've been on YouTube for about three years but the good thing is if I'm wrong I can tell you here and then you can't go wrong so I decided to go.
I stepped out of my comfort zone a bit and wore navy blue. I saw some farmhouse decor signs on pinterest and wanted to give it a try so i decided to start by using a sponge brush which doesn't look like it would be. too good an idea the way you're painting on the foam board. I don't know why I went ahead with it but anyway I cover it all up with and then decided to add that I'd just leave it like that with that simple blue color but I wanted it to show through I don't know I was going for a blue-gray color so i ended up using a gray on top and you'll see that in a second and i also switch brushes so i end up switching to a bristle brush which was a little easier to work with not too bad but trust me it gets a lot better once i painted the part top with that gray but now what I'm going to do is take my dollar tree skewers if you're lucky enough to find them pick a pack because I love them they are very very long I think last time I measured them they measure about about a meter long, they are quite long and I love to use them for signs, so I am going touse this as the border of my sign if it fits snugly on the outside of a piece of foam board the width of the the spike and the foam board are about the same so it fits snugly on the side so what i'm going to do is mix these two colors they are both waverly chalk paint i found them at walmart i wasn't trying to do hazel because it was a little too dark for me i wanted to go between these two colors so i'm going to mix them together and then i'm going to paint the skewers remember to go show some love to elena jenkins my friend who I'm doing this collab with her video will be linked below so everyone can go there and show her some love and let her know I sent you in the comments section and also if you come here from his channel well i'm very appreciative thank you so much i hope you like my videos enough to subscribe so i experimented a bit off camera with my bristle brush and paint gray I'm going to finish that on top so trust me it will look the best. once you're done I'm sure you'll see that you've seen the little thumbnail by clicking on my video so you must like it a bit but yeah it'll look better don't worry we're all you know still we're trying to figure out how to use this foam board it's definitely a lot easier to use a bristle brush so do that first instead of the sponge brush now i'm going to take my skewer once i'm done painting it place it on the side I'm going to score it with my pencil and then we're going to cut it with my stem cutters and then I can glue the skewer right there on the side hmm so do that to attach the cocoa liner to the sign.
I'm going to place it where I think I want it to go and then I get out my ruler and I'm going to mark two points on each side of the cocoa liner and I'm going to poke two holes with my pencil and I'll show you that in a second and then once I've got it do, we'll add some twine or whatever you have on hand, a piece of string, whatever you want to tie together. the cocoa coating to the happy sign so now I took a piece of the skewer on the end that has that little pointy end and easily inserted it into the side of the cocoa coating just to poke a hole that way I can attach as I said lo whatever you have handy piece of yarn i'm using this piece of floral wire and i'm sorry if you hear that alarm in the background it's early morning and my freshman keeps hitting the snooze button ok then i'll take this floral wire and I'm going to run it through the cocoa lining and also through the foam board so I'm going to join both sides like this I didn't twist it the back of the floral wire on the left side is too tight yet so I can finish the right side and see how it looks and then once I like it, I'll go ahead and twist it as many times as you like. you decide to use that and then once you twist it enough you can snip off the ends of the excess to secure the bottom of the cocoa liner.
What I'm going to do is I'm going to take some nautical rope from the dollar tree and I'm going to glue it all the way down so I'm going to add hot glue to the foam board part and also to the cocoa liner so it's glued down and the bottom is secured , then I'll cut off the end of the nautical rope and then I'll add some hot glue to the end of that rope so it doesn't fray, then I'll add a sticker on the bottom that says gather if you'd like to use the one linked below and, last but not least i used greenery inside the cocoa siding and this greenery is from walmart they were a dollar each this sign weighs next to nothing so it is very easy to hang and what i like to use to hang anything even things that are heavy are command strips those are perfect for not putting holes in the
walland they work great so for the next DIY I found another DIY to do with the small pieces of decoration of the cathedral of Dollar Tree.
So what I'm going to do is add something to the center because there was like a little sign there and I removed it because I thought I was going to use this for a different DIY now this little sign is from my last video that I did. I had these little wooden signs and this little sign came on the penny After that I removed it and put it away so I'm going to add that in the middle and now I'm going to take a recycled dollar tree box that I already had and go go ahead and paint it. a solid color because as you can see it's a bit worn I wouldn't leave it like that I like the way it looks but I want it to be a solid color as well as my first DIY when I painted the spikes I mixed the hazelnut and chestnut together I'm going to do the same thing to give myself a really quite creamy color and I'm going to add it or paint the whole box with it to connect the two together I'm going to take a dollar tree craft stick I'm going to add hot glue to it and I'm going to connect these two and I'll add it to the back right at the fold of the cathedral decor piece and the box to add more security to this if you're going to hang it. on the wall I'm going to take a little wooden dowel and paint it the same color as the box I'm going to add hot glue and put it in the crease in the front of this where the cathedral and the crepe flesh just like I did on the back side i've had these dollar tree cotton stalks sitting in my craft closet for a long time because i haven't really been doing farmhouse diy so kind or i forgot about them and then i saw them and was like ok , this is perfect to go inside the box so I'll take them off I won't take them off the stem but I'll cut off the long stem because they have really long stems and I'm going to put them there and you can hang this if you want I won't because I decided leave it on this little shelf I have but you can do it it will stay um hot glued because we added the front and the craft stick in the back and then if you just add flowers inside it will be totally fine it won't fall off two pieces of foam board I always get my foam board from a dollar tree or walmart because it's the cheapest sometimes it's even cheaper at walmar I always cut it with my utility knife.
I have shown you many times how I do it. At first I just score it and then go over it all over with my utility knife so these pieces are about 12 by 8. inches, it's also good to sand the sides a bit with a sanding block from Dollar Tree because sometimes it has a bit of roughness on the edges from where you cut it from I'm going to paint the foam board piece with my old wax and you want to use a bristle brush because it looks more like a wood grain here if you do if you use a more precise brush it will do make it look solid and you want it I mean if you want the look that I went for where it looks a little bit more like a piece of wood then you want to use a bristle brush so I'm going to go over it and then I'm going to use a paint on top so the wax isn't so so dark because as you can see it's pretty dark I also add water to my brush so it gets a little bit lighter and as soon as I'm done don't wait for it to dry I'm going to use my cashew chalk paint and go over it with the same brush and the reason for this is i really love the look once you see the finish after i go over it with this it looks so nice another reason i'm using foam board is because i can cut it to the exact size i need for a banner or something so since I'm using them as sort of buns instead of going to the dollar tree and trying to find the perfect size sign to use I can always use a foam board.
You've probably seen me do this a lot recently so these are my two
sconcesand what I'm going to do is take some dollar tree dowels and frame the foam board. so it looks like a sign or buns now you can do this with tacos. I usually make them with the long wooden skewers from the dollar tree. If I make a really big sign, it's up to you, but if it fits perfectly on the sides, that's why I like it. doing this so I'm just going to add hot glue and put them to the side as I'm not going to paint them so "Everyone remember when I was in the hari sambal creative champions contest that contest is still going on so don't forget to watch it it's every saturday and i think there are two more to go so make sure you go watch it but me too i just want to say thank you so much to whoever voted for me in the first round i really appreciate it even though i didn't make it to the end so appreciate y'all the pegs are glued on and i really really love how it looks can you believe how well paint goes on this foam board i mean it looks so pretty and i'm obsessed with that color Now what we're going to do is take a dollar tree gift box and I'm going to cut it in half this is going to continue with the scones if you're still watching thanks you're amazing put a heart emoji in the comments below I love to do that me i like interacting like this with y'all because it makes the comments so hard emoji used to seeing i'm using the dollar tree self adhesive wall tiles to cover the boxes so i open the package i flip the wall tile onto the back side, I'm picking up the clear plastic which reveals the sticky part of the tile, I'm going to place my box on top of it and then I'm going to cut the excess around the box, so since I cut around the tile, the sticky part of the tile will separates from the actual design on the tile so I'm just going to use my hot glue right there and finished all the sides now what am I going to do to complete the look of this little box.
I'm going to add studs only to the top side area so I'm basically going to frame it and keep it from looking like it's tiled so it's an easy way to layer this. I'm just going to add hot glue around it and stick it to the foam board. Now you might see a little hole there because I was going to try a different way to attach it, but Honestly all you have to do is use hot glue. I'm just putting flowers inside this and I'll show you another way to add more security. to this from the inside so I'm going to use dollar tree jenga pieces and I'm going to add three inside one on the bottom and one on each side so it will definitely help with security and this won't fall apart , I'm using command strips to hang these, that's the best way to hang items on the wall without drilling holes and I added dollar tree magnolia blossoms there.
I'm using two 6x8 dollar tree canvases now I'm painting the frames width after removing the canvases from the frame I'm now using a dollar wreath charm and I'll paint it black so I'm making a chandelier for this last DIY and I'm making a double frame out of the canvases otherwise I would have made two but I realized this crown charm needs a thicker base I guess for gluing so that's why I doubled the frames and you'll see what I mean now I'm going to glue both on top of each other so I have a thicker base for the turn now I'm using the hazelnut on top of the white paint with a bristle brush and now for the fun part we're going to decorate these sail buns so this is what I mean when I say I'm going to add the other one on top but first before I do I'm going to create a little design out of the sun hat straps.
I'm starting from one corner to the other corner and I'm going to continue and just let you watch because it's a little hard to explain but it's so easy to see instead it's okay and once I've cut off the excess I'm going to add the last two strips this way and I realized I needed that bottom part of the frame to add the crown charm so I just removed that little area of the sun head strips. Do you remember how? I said I need to double the frames so the bottom where the reach arm will sit is thicker and um better add two frames so that's why I did that I'll hot glue the frame first then I'll add the reading charm even though i'm just adding a dollar tree sail to the return at the top i want to add some extra support with a falling tower block so i'll add that to the bottom and then paint the bottom black like so that i just glued some dollar tree greenery behind the candle the candle is light so don't worry if this falls over and over again to hang this you just want to use command strips on the tree tray of the dollar and for this pot I'm making a trellis out of this this is really simple all I did was take a few dowels from the dollar tree and I didn't cut these two down.
I'm going to use and hot glue two of them to each side of the tray on the back and as you can see I apply a lot of hot glue there so I can glue it on top and then I'm going to hold it in place making sure it's pretty straight and I will do the same on the opposite side once they have dried very well. I cut a piece to fit on the top right here and I'm just going to add hot glue and top. place that part once it was done i put it down and grab those really skinny skewers that i still have a lot of and i'm just going to figure out how far apart and how many i want and go diagonally going left to right first innowhere, so now that I have that part done, as you can see, I turned around on the opposite side to go the opposite way of um, what did I say earlier? um all this hot glue on the other side is so the last thing i did before i added the greenery was i used my old wax on this and i used a little bit of water on my brush so it wasn't super super trying.
Darkens dreams. I added greenery to the bottom of a dollar tree tray. All I did was remove the vegetation from the stands by just pulling it off, so now what I'm going to do is add two of the pieces of vegetation. on each side, going up the sides just to make it look a little fuller and, um, it looks prettierI like it. I often call them jingle blocks just because I grew up playing them, but specifically at Dollar Tree they're called tumbling tarp blocks, so for each one I'm going to use 12 pieces so all I'm going to do is basically do four rows of three so I'm just showing you the shape of this basically you're going to do a diamond or a square and then we'll glue everything together this in my last video i mentioned i was going to scream thank you to my viewers leaving comments below i want to thank barbara romans thank you so much for watching me especially during your treatments i would love to see some of your DIYs so please if you can share them with me on instagram or email them to me at bianca and d gmail.com after i have my four rows of three now i'm going to go ahead and stitch all this together to make a diamond shape so last night of i decided to join tik tok. what i do is look up bianca andy i'm trying to stay on top of it i was a bit nervous about that i don't know why youtube i feel like it's more stressful so i'll post more diys there. and diys that i already have on my youtube channel maybe one day you will be lost and just different content in general so go follow me if you want to see maybe a different side of me now im going to use this dollar tree basket to basically making the pocket on my falling tower blocks so I'm going to cut there and see how much I need to cover I'm going to stick it in there and then I'd cut off the excess so I flipped it on the back so I can see exactly where I need to cut so you can paint this with whatever color you choose I'm using a green mossy chalk paint and added some white to it to line it up a bit so it wouldn't be too green and for the falling tower block area I was going to paint that white and maybe a little distressed but i decided to leave it as is because i'm going to add some white dollar tree hydrangeas in there and it really pops against the green and light brown they definitely came out much better than expected or now i just have to find a place to put the next one on them i cut a smaller piece to create a candle holder you can make two i just made one just to show you how easy you can make it look like a wooden skunk so you don't need do this part.
I did it just to see how it would look, but I'm going to create some lines here just to give it a more woody look. Once I do this and paint it, you won't even be able to see them, but I'm going to use the back of my blade and just do a few lines with it. I'll also use the blade and cut some lines here to or to make it look like a wood green I don't want it to be a perfect rectangular square so I'm using the end of my blade to score the top and cut out a few pieces or make little dents just to give it more of that woody look and now I'm going to go over it with my old wax and a little bit of water and now I'm going to take some black paint and a smaller brush and do some black dots and you can see I'm filling in like the dented areas on the top and bottom and kind of like where I did those lines this is where I really transitioned to look like a piece of wood just by adding a bunch of lines with the back of my brush and i just pushed a little hard on some areas and lighter and some others and then added more black and buffed it with my largest bristle brush to finish off the piece of wood i'm making little circles c With the back of my brush and also making them a little bit different in size you don't want them all to be the same and just spreading them out now I'm going to add this little jar that I picked up from the dollar tree I'm just going to remove the shells and the little cork on the top and to add it here i picked up some magnets from walmart i am going to glue a little bit to the small jar and then also to the piece of foam board.
I forgot to mention that I also drew a couple of lines, one at the bottom and one at the top, just with a bit of black paint so you can also most likely be able to get away with just using a small little square of the magnet and I ended up using two the flowers won't knock it down or weigh it down at all some tower blocks that fall from the dollar tree so first I'm going to hit three rows of eight and then two rows of four as you can see I'm using my dollar tree rule.
I have my Sherbonder glue gun and glue. You can also use some gorilla glue sticks. it helps to make sure the rows of rotating blocks are straight and it really helps this is s It's an easy DIY but it looks so fancy and here I'm just showing you how easy I am putting together the two rows of four blocks. Now that I have them ready, I'm going to glue all this together. you can see what it looks like and how i created the candle buns so i'm putting the two rows of four one on top and one on the bottom and the two rows of eight like this it's like one long rectangle and then for the last piece I'm going to place it in the center over the rectangle we just created now I'm going to hot glue everything together just make sure everything is straight with my ruler and I actually got inspiration for a candle sconce like this from excess stock .com except the ones I saw were huge and I think they were outdoor and it looks almost identical to what I'm making except theirs was gold in color and it was huge and mine is a little smaller it's 17 and half to about 18 inches so I went ahead and made two of them except the dry one and one that I made doesn't have that center piece in the middle so what I'm going to do is stack them on top of each other like this way and the reason for this is because the center piece will be to keep have my mirrors in place. and i have a really secure and stable background to glue it to so i took them out and gave them a nice spray paint with a matte black spray paint and now what i'm going to do is glue them on top of each other.
I bought these five pack of mirrors I think it's four inches from michaels and it was only even two bucks because they also had a coupon and that gave me like a few cents off so it was super cheap for a five pack I know they have some mirrors at the dollar tree but i couldn't find either of my two local dollar trees so if you need what i did was online and bought this pack and just went to the curbside van now that i have the mirrors attached downstairs i'm sticking some dollar tree skewers in between the blocks and under the mirrors that's another reason i did it this way and made that center piece for the mirrors so the skewers have a place to stay and I'll also add hot glue in a second so Dollar Tree sells this hundred pack of skewers and I love them because they're obviously only a dollar a hundred and I like them because they're very thin so you can hand Make them however you want and you can also use your scissors or whatever to cut them to your liking so basically I'm measuring how I want them to sit under the mirrors and then I'll add glue as I mentioned. i use to brush those skewers, um, that's just the area where i cut, so i glued five sets of two blocks together for this last part on the sail buns.
I'm gluing these two together so I have four here and then I move. that out of the way and putting a fair set on it e and gluing those four together on top like this lastly I'm taking the last two sets and gluing them on top of each other and now I'm going to glue them all together like this for so this part will actually go on the bottom of the rectangular buns that we made and it will hold the candle for us you can see one side has two blocks and the other side has four and that's because I'm going to glue it under like this the two blocks they're going to be glued under the scones and then the part that has the four blocks i made to make it a little bit thicker or wider i guess you could say that way it has a bigger base to hold the candle like so that we are actually going to add another mirror since i bought a pack of five i can add another mirror here to hold my candle so i thought it would look absolutely perfect in there now i will add hot glue and place my mirror like this it was or diagonally to where it looks like a diamond like this and I'm going to go ahead and leave it like this and I have this dollar tree pillar candle and it's led so you just light it at the bottom and it flickers so I figured it was great that I found it because I was actually on Amazon looking for something and um I think I found some like three packs for 20 bucks you know something like that so this was perfect for this and I'm also using my level to make sure everything is ok i only ended up making one of these sconces but just think how perfect it would be if you made two and had one on either side of your fireplace or either side of a large mirror or diagonal from each other it would look so pretty and let me know if you're going to give this is a try also send me some pics on instagram thanks so much for watching and i'll see you next week 3rd january for a new diy valentines video it's just
If you have any copyright issue, please Contact