YTread Logo
YTread Logo

Toast's Supercharger is WAY BIGGER Than We Thought!! FREAKIN AMERICA BROTHERS!!!

Jun 09, 2021
Guys, we are working very hard to finish the Camaro for Cletus and the Houston cars, which is this Saturday. Tickets are now available online if you check my link in the description we left tomorrow. We have a lot of things left to do, but we are here. I'll bring

toast

even if he's running or not so see you on Saturday let them break the chip yeah bro you're on the YouTube chain please check out okay guys we just finished the video. We put the engine in the Camaro. and we didn't want to leave without being okay, take this fragile everywhere, don't crush it, so guys, we just finished, we just used the Camaro video, we were getting ready to leave for the day, but we're dying. to see the edge of the hat for the

supercharger

so we're opening it up right now we're just a bunch to resist Dossett you're still not convinced yeah James has been gearing up for a centrifugal blower there you guys are there this.
toast s supercharger is way bigger than we thought freakin america brothers
Wow, oh, that's it. A new doorstop, come on honey, yeah, oh yeah, the biggest one I could give them, oh, hello, polished, look at this, yeah, what size are those? I told him I wanted the tallest one, they had the biggest holes and didn't age well. they delivered that thing when it's in front of you doing a burnout when it's spinning it's going to sound crazy yeah yeah I was just thinking that or just jamming might be a little more appropriate let me sing oh yeah do you think you know , poor? That outdoor thing placed there, yes, we definitely did.
toast s supercharger is way bigger than we thought freakin america brothers

More Interesting Facts About,

toast s supercharger is way bigger than we thought freakin america brothers...

It's going to be very difficult to tune the tip of this thing because it's going to go from vacuum to all air, like that's basically enough air to go wide open here for that motor. Yes, there is probably enough there, this the difference between this and this will be nothing. Jase is like a free kid, that candy store is in your truck, I mean, literally, you're going to think about it, make a big burnout right there. as such, like imitating a piece right there, man, yeah, it just had to be that way, them blacks are carving to be tough hawlucha, you said old school, I love it, guys, we're going home, but we decided to ruin it all in place of everything right now.
toast s supercharger is way bigger than we thought freakin america brothers
We have all the blowers so there is a hat that helps us pump, yes we have to wait. Dan, for now, so all this stuff for a big block Chevy is pretty expensive and we were able to talk to the guys at the blower shop. them and they were very excited to work with us on this project, so definitely check out the blower shop. These guys were amazing at ordering all of this and they did it so quickly that they got everything here so quickly. I think it says caution, it's a steam elevator yes, all that is beautiful, it fills you up, it's glorious and now let's see what we have.
toast s supercharger is way bigger than we thought freakin america brothers
I like that word glorious, it's glorious. The same people who have Finnegan stuff to see the badass, it's great. Do you use blowers, friend? Yes, I know the guys at Holly's Blower Shop and I know a lot of people in Australia use blowers. Okay, so yeah, he hooked up with a bunch of different pulleys and belts and look at that bill, he's not crazy. pulley and then it has something different I think these are the points that it is a belt right there, where is the belt? I mean a serpentine belt, yeah that's pretty sick, we have our meeting, the guys at the blower shop set us up with this complete kit to sell it complete. kits you can get there whether it's an LS, a big block, a small block or even I think they made the fourth one yeah they make the fourth stuff and you have anything I don't know but it comes complete with literally everything you need , so it's really really out of place, oh, everything is very polished, that's beautiful, that's beautiful, okay, there's the manifold for our high-deck big block, there's the kit lifter for the good stuff here, yeah there's a kit we need a kit with oh wow so this is a 1071. billet prop

supercharger

from the hobby shop dude this thing is huge.
You say there is no oil and Laurel, so leave it on until there is oil in the block. Oh, that's the back we went to. I'll take fingerprints all over the team. He left a team. it's getting taller oh I'm so glad you wanted 1071 it fits perfect yeah you better use some cutting don't hate modifying this chassis come on here we go the tire

toast

ing starts with this oh man everything the high polish. ratchet strap oh honey come on that's big oh this is a perfect guy hell yeah I just wanted to touch the car they are predetermined oh daddy that's a bunch of super charger yeah oh my gosh they said come on to Australia, we said, hell yeah, bro, dude, that's it. crazy, I think we could be a lot happier with the way that song came about, so blueprint Blower Shop, guys, this is like our baby, now, but we'll make you proud, it's a combo and a half a day, a day.
In less than 24 hours it went from a 300-horsepower big-block chimera that had a thousand horsepower capacity, if not a thousand siblings, on its smaller pulley. Hold this thing, you probably will. Hell yeah, okay, we have to call it a day. For today I have to try to sleep on this and we'll come back tomorrow hooking everything up so we can run this puppy quote of the day, yeah that's a lot better than yesterday, what's up guys today we're on day two. We're really going to get it done by putting this supercharger James is putting this water pump right here I just received this Missouri water pump in the mail from Summit Racing I ordered it last night I already received it today We have a ton of stuff from Summit We stayed overnight because we know they're the fastest and we will show them everything that day.
We're installing a bunch of awesome parts on the Camaro today, so it's going to be an awesome blast the day we just start getting that thing running. I think it's We're going to see some head pressure, so the only thing we're worried about with this water pump is whether it cleans the COG belt drive system. We don't know how it's laid out but we really hope it's not a problem so we've got some bill gaskets here for the intake manifold sticking these puppies on before we take that big old manifold you saw yesterday and planted it in there put some silicone over here, just seal the valley, oh yeah, okay, so here's a bunch more stuff we got from Summit, we had to get a new starter because we got our different flex plates, pretty light stuff, then we got a bunch of ARP hardware that will lower the input bolt down some other things like the flex plate and lastly we got a transmission cooler because this is going to need a lot of coolant at 150 miles per hour, burnout until the last minute or two , it's going to be pretty loud James it's really silicone, hang it here, it's an online art bro, nothing else we have to do before that happens.
He's okay, she's not, uh, so he thinks yeah, now he's really on and then behind or below or well, that's a big gap. Games, some good guys, so we have this high deck manifold, we have some bolts and we had to go out and get a couple different types of hardware, but we have everything figured out for that, so it's in James, it has a dealer in the bill, double sink MSD distributor, that thing is a beast, work on it, I think it's crazy this camera and Franco, oh yeah, well his double sink, honey, come on, wow, that's a gas cock incredible, brother, remove the gasket.
I'm good, so check it out guys, now we have our billets placed here and the only thing we have to remember is to do. is to put oil in this thing, I don't think it'll last long if we don't, they'll probably be very unpleasant, yeah, we bet, so let's do this, James, you film Cooper and I'll be the transport team. In them, do you feel strong to take charge? Eat your Wheaties. I'm ready. Do your arms feel extra long? Punk. This is the worst. I just had this long. I mean this nose. I mean, it's hard to catch it on camera, but that's it. a little like three feet before you get to the engine, oh yeah, so the bolts just go to the sides here for the blower and at that point you proceed to rip pretty good, although thumbs up it looks classy, ​​all this chrome plating makes his brother come home.
Well guys, this is one of the coolest things the blower store sells. This is their EFI platform so it has fuel rail injectors on the bottom and we'll use some LS style injectors and then the fuel comes in through the top. the blower, so we're spraying a Nighy 90 right on those blades over there and then this little filter and then our injector hat goes on top, pretty sweet. I mean, this thing is beautiful and these fuel rails are so pretty, so right now we're about to head into performance gear, get it over there, get all of our AM accessories and stuff like that that we're going to need for the fuel system. , we need a new collar for the radiator hose, a bunch of things, so here we go.
Luckily we had a problem with our distributor, it hits the back of a supercharger, it doesn't actually hit it right now but once there it will never run right so we have to get it. a flat cap for that, okay guys, so we're here doing some things just buttoning up, putting the flex plate on, we'll put the transmission here in a second, which we have there. Powerglide James, man's favorite, but I don't. I don't know about that, but it's the best for big burnouts, that's what all the guys in Australia use, so let's go fast, let's get those reps down and plus it'll be great for the guys' races because we need to put a tire on. giant on this thing and see if it wheelies eventually it has a lot of right nose but your tire will definitely try to put some sandbags on the back and try to stop on the bumper, alright guys check it out we have a pgc converter working. it came out pretty good Ruby, I mean oh yeah she rips so we hit our friend Dusty Bradford spent another toast converter and we're about to launch this pup as well as an electric glider we ordered through him , pretty much your basic power plan the only thing we did was get an SFI case because with all the high revs we are unloading and reloading the wheel speed situation we wanted an SFI case the transmission blows up you know that would be cool yeah , and it has a trans brake because we will definitely be doing drag racing with this thing and what I need to be able to jam the trans brake and go to the bumper mount with wheels, so today we are going to throw all this in the car, connect this thing and then we'll finish off with pretty much everything that needs to be there and then from there we'll wire up the engine components, things like the steel system, the fuel system, the cooling, all of that, fix it all up, so if we're going to put the pieces together we're going to have a bit of a mess so Check it out guys we put that belt on just see what it's going to look like it's pretty crazy looking but we know our water pumps are going to be cleaned now so that's good it's all going to be looks great I mean do everything that's in this kit it's been very nice and at Cooper he's working on the fuel system so he's putting a different bulkhead on this fuel tank so we can run and line up with the front.
We are using one of our old fuel pumps from Leroy and James is building. Let's put out a steam port kit right now, so let's do the blower right now. There's our injector hat. Look at this, guys, you're not injecting. This is our injector block. I guess I talked about it a little bit before, but we have our. One hundred and sixty pound Holley injectors in there, they all fit, which is awesome to just throw some accessories on, while Cooper will eventually get here with the fuel system and hopefully we'll be ready for them at that time, you guys will have to come back. see the finished product, we haven't screwed the hat on yet.
I was getting ready to do it but we have too many things that need to be taken apart right now to put it back together for final assembly so we're working on Guys we should have this on hopefully in the next video we shoot the Glide is on The whole front assembly, I mean, things look really amazing, so I'll do that for today, though thanks for looking, Dale, damn. See you later, any last words, Dave Cooper, you've got fuel in your armpits, that's cool, that's cool to say, that's cool that it happened.

If you have any copyright issue, please Contact