YTread Logo
YTread Logo

This Hat Screams And Coughs Smoke

Jun 06, 2021
Hello welcome to the second episode of they didn't ask for it but we made it and sent it to you anyway aka today's project it's an animatronic hat for King Fupa each in a can of h3h3 thanks to these fantastic. user suggestions, you got a message, it's from Derrick, oh I also forgot to mention that

this

will be a vape cap. We took all the suggestions and put them together, so here is my bad hat CAD model, which on the inside is about half the CAD time. I haven't really gotten into creating

smoke

for fake vaping, but we have a little mouthpiece, a little Bluetooth speaker that we're just going to plug in with an audio cable, a fan that's going to blow out

smoke

that I haven't figured out yet.
this hat screams and coughs smoke
However, and a battery pack that provides the batteries, the idea is to make it look like, hey, that's me talking about a hat and then it

coughs

and smoke comes out. I don't know what we're doing, she would cut things. Does that mean it is? laser time I only remember that it was wooden or maybe we only had the big pieces left, it's okay, we might be lucky. Oh, daddy hit you in the nuts. I turned that jar over too quickly. Sorry, cameraman John junior or senior, no less. weird just not saying anything sorry oh yeah as long as we don't mess

this

up we're fine so it's good that it ever fits in a vent oh i just pushed it further look even if this place was clean it would still have this. problem did you get me the watch oh yeah the fan every time this happens people always ask what it is and I always answer them.
this hat screams and coughs smoke

More Interesting Facts About,

this hat screams and coughs smoke...

The problem is that nobody remembers. I don't answer, you're lying to people, that's Edward's vent. At the races some of these pieces came out pretty terrible like this one, I'm not sure what's going on, we could cut a new one but we don't. I will simply carve it painlessly, painfully, painstakingly with an exact knife. Cut it a new one. I'll be back in a second. Oh, it comes hot, okay, it comes cold, fresh beans, so now we have to put it together and I don't know if that's going to work, which is the story of almost all of that. if you want this leave a comment i will put a stamp on it and mail it to you i will keep it there on the floor that way i'm going to lose it this goes there this goes there this goes there these go yeah I came across a peg that's cool and some threw it there.
this hat screams and coughs smoke
Did you understand it? Thanks John, you're real, you're the best man. These shorts make my butt look fat. I put the pin here somewhere. Oh, I threw it at you. Where? Go, yeah, whatever, I'll get another piece of towel, hey, I'll make you a deal, how about I keep doing this while you go get those two pieces from there? If not, you say no, yes, I can't. make Wu come over okay I should use it well I got it this is Fupa make me look fat hey kids it's me the inside of a talking penny today we're going to make a talking Queenie what's next passed?
this hat screams and coughs smoke
Should we try SMAW and smoke? now let's make some smoke, we have a lot of nichrome wire, let's try to make a smoke like effect to imitate vaping without using real vape because drugs are bad, okay, you're supposed to nod with me, let's have a piece . of cotton we are going to wrap it with a little wire at night. I just bought a pack of different gauges because I really don't know what kind of wire thickness we need. I don't know, I don't know, I don't have. idea, so let's just soak the cotton in a fog solution and then we'll just connect it to a battery.
I tried 12 volts. Do we want to use fog juice? It's different fog juice. Is there too much water in fog juice? something I really don't know where you're supposed to find glycerin in a grocery store. I don't know, I'm afraid to ask you, employees, we found one in aisle three. I'm a completely different general glycerin store and this is a weird hippie. vegetable glycerin hey, it's actually pretty good, we should see a lot of smoked meat before she realizes, that's a good idea, oh hey, what's up? We've never seen a fire like this approaching that hillside.
The flames light up the sky about to burn the house. your house needs like you burned this whole house down, wow that was weird. We're in Ventura, a local makerspace in Ventura, they didn't burn down and they have a laser, and we have to get back to this project. In fact, I took it. to reorder your sound board, speaker batteries, or a bunch of new Arduino. I have nothing, it's actually very sad. I'm out of tools and supplies so we basically have to rob this place and then buy everything on Amazon and then wait a day or two hey Dave I'm gone okay what we have is a really bad ham trying to be nice, Gallatin, okay, so cameraman John, that's it, so this is all very annoying, cameraman John perked up like a sock. puppet animation in After Effects two audio clips we didn't take those audio clips we put them on this Adafruit sound effects board then I wrote some fancy Arduino code that takes your animations and puts them back into a servo and then the Arduino triggers the sound effect I know what this works right now, so let's see if we can put it all together.
I don't even have a computer, so we're going to remodel some of these things. I will have it, but it is not configured. because I don't know how we're going to set it up I don't even have monitors anymore the only thing I have is the tower everything else is toast we have to figure out how to set this up here it's a pleasure the only problem is that I have I have no idea how this works this is a giant control panel, how convenient, how do you turn on the laser? Yes it should be, we spent the last 30 minutes trying to get our laser parts file onto the laser.
Well, I heard about the downed bird. I have a flash drive we have a DXF file generated from fusion 360 and we import it and nothing happens be a pout kid yeah what is this top laser and laser CAD crap called? Oh, it works. I really don't know what I did differently. Thanks Paul you are the best oh yeah I just realized I have no idea how to use this software. I shouldn't have hung a bach, right, yeah, we just do what we always do, just press the button, since you're happy, oh dear, I don't look good. that's good, we're not giving up, this is new, I'd feel a little guilty, but 3D printing carts, free candy, a little scared of how people will feel about this, but I guess we'll see, okay, I have to go to the mirror, okay?
Kids, prepare yourselves, educate yourself, this is not Arduino Uno, this is an Adafruit sound board. Sound board president John found some amazing clips of Ethan dying animated with sounds inside After Effects he took those keyframes and pasted them into the Arduino wrote firmware that interpolates between them. and move the servo motor the audio files are activated on the Arduino sound board which plays on this bluetooth speaker the fan is running continuously because we are lazy a generation of smoke is connected to these wires which then connect to these big scary ones lithium ion batteries didn't explain anything, well go to my blog if you want more details and code, you guys are good, no one cares, no one gave us reactions, we tried to get fake ranches, I hope you know why not even my cat It cared.
I have a suggestion for that and I asked for it, but we did and said too many ways, leave it in the comments and Ethan, I don't know how to contact you, so if you want this hat, I can't imagine you not doing it. I don't want this hat, let me know we are dependent.

If you have any copyright issue, please Contact