YTread Logo
YTread Logo

Powder Coating Gloss Black with the KF-X1 Powder Coating System

Jun 29, 2021
Now before I start blowing this up I want to jump in and remind you that if you want a chance to win the Eastwood hot coat 1000 pcs we will give it away when we hit a thousand subscribers if you want to share this video with someone who you think it will bring value and encourage him to subscribe so we can reach that thousand subscribers remember you have to comment on each video like that when we choose a random video and random comment the more videos you comment the better chance you have to win remember don't make multiple comments because if you do you do the

system

might delete your comment and you may not get chosen so please don't make multiple comments of course unless you are talking to us.
powder coating gloss black with the kf x1 powder coating system
Let's get this over with, okay? Welcome back to the 710 performance vlog bringing you new

powder

coat videos and today we're finishing up this bumper so we've got it all set up and ready to go ahead and prime it. coat. That way, we can go ahead and pop it in the oven. This is a zinc primer, but first thing in the last video we did, we didn't go as deep with the machine, so today I'm going to take a break from the beginning first. we're going to talk a little bit about the kx1

powder

coat

system

and what settings we're going to have first starting on this bumper we're doing the primer now keep in mind this bumper will also be the first bumper we actually do a second coat on so that it will be really nice for us to be able to see how well the second layers are deposited.
powder coating gloss black with the kf x1 powder coating system

More Interesting Facts About,

powder coating gloss black with the kf x1 powder coating system...

We're doing a different kind of

gloss

y

black

today, it's also inky

black

from prismatic powders. We'll go ahead and leave a link to that below if you'd like to check it out let's go into the system and what settings we're going to have this on why we do this Prime so the main power button for this editing system is here but first turn it on I want to show you right here I have the psi to go in set it to around 50 this regulator two come with it and we also have this from a little thing that collects the water and also from another regulator that collects the water as well and this is set to around 80 so it's letting 80 this is letting 50 I'm I'll go ahead and turn the system on.
powder coating gloss black with the kf x1 powder coating system
This radio button here changes so you can see what your Iser fluid is. Those are these arrows that rise in their supplementary air. The top 21, yes, the top 21. gun that's the orange hose right here on the gun you can click on your presets the first preset here is for flat stuff this is for the second layer this is for hard to reach areas that's what we'll be working on today and you can see where it is this arrow but if you press this em here you'll see it also changes the rest up here even this is the powder this is the powder pump that pumps that powder and then this is this like that detail atomization so this is for that Run it for airflow this is flat if I click on this you'll see where it goes in the KV at this preset at a hundred and the microamps are at ninety now let's go to the second layer and you'll see the kV is at a hundred and the microamps are at twenty-six, also changed dust and airflow.
powder coating gloss black with the kf x1 powder coating system
Now when we switch back to the second layer, you'll see the same thing as the mic. the amps are actually very low and the kV is still quite high it changed the dust and it also changed the airflow and then you can also adjust them here now when you were on this setup when you were on the hard-range you can't increase your microamps any more of 12 you lock it there so it doesn't go too high you can turn it down and you can go down to 10 you can raise your kV up to a hundred but you can just lower it to 90 now it locks you in that setting if you want to turn it off so you don't use the prese ts and you're just setting it yourself take this power button here and hold it down and you can see it's flashing there you release it and now it's off and you can go ahead and be able to adjust this however you want to be able to adjust them I'm not going to change them all.
This is how we have it set up. If you have any further questions, please ask them below. I want to break this down a bit more on the machine as well on the back. these blue hoses are airflow and dust so they just plug in here they're all NTP fittings but what I like about this is they come off as well like little fittings like for your compressor or whatever, they just go ahead and blow off makes things easy to clean chuck's like that the only thing they don't have is the air supply which in this case is what we have this is one we had before so you'll need to get this and just hook up its fit for your air hose just like your regular arrows and you can plug it t in that's the longest we have we're going to order some so it's a little longer but since the gun and all it's long you don't necessarily need a super long air hose if we already had that setup it would be hooked up really close to the air compressor which is something to keep in mind and also brings me to the next thing I wanted to talk to you guys real quick and it will seem at the end of the video about why we are selling the machines and we are going to talk to them about possibly putting an extra hose in there so they have a hose but they may have to go somewhere and get the actual accessory that is will connect to your air. this bumper with this zinc primer now what we have here real quick is we've got the box hopper which has a bag of zinc primer on it and this just sets when you turn it on it has fluidizing air coming out so last time I had eyes fluids too high and it was squirting hoo k around and everywhere but now with the fluid icing pressure set the way it's working perfectly fine for us we may need to adjust because every powder is a little different , but right now it's not spraying so that's a good sign now let's go ahead and get the power through so now Jeremy is wetting the ground we're going to go ahead and let the water soak into the ground for probably about five minutes that way it's nice and it's wet you have to make sure your round is wet not just the ground but the actual ground rod as well.
You've got to make sure the ground around it is moist so we're going to let the water run over it for a minute on low so it can go ahead and soak it up and it'll work better we realize when we have a problem with the ground as it looks like we're having it right now this works pretty well so we've got it all set up we're doing the black so I'm ready to look at this better 'Cause so much better black, oh yeah that's better than regular

gloss

y black, oh yeah What's up y'all? It's TL Steve here with a 7-10 performance and I wanted to jump right in and explain why we're actually selling this machine on our website, so after contacting the company we bought it from the CEO. group we were talking with them after we made the purchase of the co ello 191 s after talking with him and they saw that we had a youtube channel they asked if they can update our machine for free without charging us more what would the model be and go ahead, send it to us for that we can show that video because it was their newest model and they wanted to show their newest model in the videos that we were going to do so we said we got an overwhelming response for people who are interested in this machine and the company we dealt with we contacted they contacted us and asked if we wanted to be a distributor here in the US the company is in China so we thought we would go ahead and we could get you guys something you guys wouldn't have to worry about fees you wouldn't have to worry about from working with the company in China or something like that right now they see our store is full we don't have a lot of machines in sa uk but essentially we will be the middle man so when you order KFX one powder

coating

system through us the charges include customs fees and shipping from China to your door when we have them in stock the prices definitely they might be go up a bit because we have to store them and the import duty fees on larger quantities of items or a higher price basically the higher the invoice the higher the duty fees so when we start ordering and pay more we're going to have to pay more on these rates too so right now the price is the best we can get it might get better actually it might get a little bit worse right now whatever email you're going to see Olo - group Please reach out to any emails I send them about the system they are forwarding those emails to us so we can go ahead and re To respond again is overwhelming because we just wanted to be able to provide you with something and give you the comfort of not having to worry about dealing with the company in China as To the extent that any replacement parts, additional parts are such that we will stock small quantities of those here as well and chances are we'll actually have more additional hoppers and tips and things like that in stock at some point then will the actual machines because they take up a lot more space we didn't go into this wanting to be a powder

coating

company selling systems the fact that we have the opportunity to offer you a great system at a great price we want to go ahead and be able to offer it to you that is why we are offering these systems for sale on the site if you have any questions leave them below or feel free to email us you can also send us a message through our website I hope this is explained a lot, remember, comment below Hey if you want a chance to win the Eastwood hot coat 1000 pcs that we're giving away to all 1000 subscribers, we've jumped tremendously and want to thank you all for your support, it's been crazy the last week.
I would say and things have really taken off for the channel and it's because of you and we really appreciate it so again have a great day and we'll see you in the next video

If you have any copyright issue, please Contact