MY WIDEBODY SUPRA IS COMPLETE!

We're back with the super today and I'm so excited because in this video we'll be finishing this up and sending it off to be painted. I just got the front bumper back from our molds and we also talked about the missing parts from the molds. We have the two front bumper extensions and we also have the rear fender extension on the left driver's side, so that will also be bolted on today, but to start we need to do exactly what we did with the rear bumper and that is remove them. The motion sensors cut a hole in them and glue them to the inside of our front bumper extensions, which at this point we're pros at doing.

The first thing I'm going to do is start drilling the center holes just like the back, the front has a notch that you can start in, we're going to drill it to about the size of this sensor hole and this test installed a couple of times and once we have the desired diameter, I'll go ahead and do the same thing. thing on the other side, okay, I just finished drilling this one, these are a little bit trickier because there's a little bit more of a curved plane than on the rear bumper, so when you do this you want to make sure that you don't. over drill your hole but when the back tab is there this should be nice and flush and be perfect for me.

Okay, with this reading, the mounted fender fits perfectly. The next thing we have to do is just hug it from the other side. We're going to have to put a bolt right here and we can pull this out a little bit, attach this and that will look perfectly the same on this side. I'm going to go ahead and put a picot on this and then widen it like we need to do and then bolt it right there and then that side is ready to hit the heights to see all together I can't wait to get this back on the road and paint it, a little trick I added to the garage.

Recently, what I want to share with you is that you usually see me wearing these blue tinted motion glasses and I'm on the computer and playing games because they help against ultraviolet lights to protect your eyes from computer screens, it's still like doing. I'm sure you don't damage the drives for a long time and I have quite a few and what I've started doing is not only using them at home when I'm on the computer, I've actually carried a few of them around. These to the store to use as little as safety glasses while we work on things just to protect our eyes normally if I wanted to cut something that I would risk damaging by sunbathing on my face maybe I would use them as a full face mask but doing simple things like drilling fiberglass and all that.

I'm trying to remind myself to wear some for my protection. It's like a couple of shots ago I was punching through the fiberglass and the smart move would be to always wear small glasses like this and this is something. I'm going to try to implement it, if you guys want to do the same you can get them for 10% off using cotija tan or by clicking the links below to see the quiet move for /tj honey. I leave all the information below. I also did the exact same process we did for the back. I took out these tabs.

Shout out to Calvin that he can cut little holes just like we did in the back. Calvin actually just finished putting the front bumper back on, but Cut these little tabs off now, the reason we're doing this is because when you actually put the piece over the fender on the front bumper, you can't have that original bumper there because the tab is on the inside here and the wires are outside. to fit so you have to cut a big chunk out of your bumper but again it's not the worst because you already trimmed this bumper before and it's all covered so we're all good on the hood but other than that I'm Done to make our glue again with our product 4243 M, this material is literally magic gold.

I suggest you pick it up if you ever did something like this. It's a little fiddly to work with and store, but it really works when you do. You're trying to make things sick and you don't want them to fall apart, so I taped the sensor shut. I left it out of the orientation. What does it have to be someone who does the same thing we already did? I'm going. go ahead apply some app to this thing and stick these puppies baby to make this money that's money right there teehee Hill boy oh man despite seeing it man it's ready to go Oh I got the front bumper on come on a plug this in, screw it in and start doing our final assembly before painting what I suggest you do I think we move to think and then we plug it in let's see yeah oh yeah that's a good idea you should tell them how to do this for what they do.

They get themselves a street hunter kit, a big recommendation is to take the sensor off the side of the side panel, plug it in and then put it in there because it's a little tight when you're going to cut this out. with the sensor, but this will mitigate all of its promise, we're out of beauty hardware, so we're just going to put the allen key in for now until we have more, so let's ignore that they're just allen keys, it won't be like that when we actually , install it, but again, this is all just for painting and before we paint we want to replicate what it will look like on the final speaker just to ensure the fit and make sure that everything will come out perfect after painting the idea of ​​the once it's going to be painted and come back you're down you don't want to touch anything talking about making this as Oleum as possible as this is a stock mounting hole and you just drill the hole on the top and put the OEM in. hardware that will hold it in because again this piece is attached to the hood so you can't do this kind of thing like we did on the rear so this is just a little lens over the top of the bumper. quality of the seed, but look, that is sick, yes, yes, we will emerge prematurely.

Test solution, we haven't done the other side yet, but the doctor will give you one, so another recommendation I have is that bolt at the top can be drilled out. Hole a little more to allow for play That's what Ferraris do That's what Lambos do These use spacers and big holes Pretty decent Pretty good just like any fiberglass It's going to need some adjustment which is really good, Although I'm very happy with how it is, you've already seen it. a little support here, staying a little here so that the fit is perfect. I'm an exaggerated guy, so tall, and like that, we're set up, so the two things that we don't have right now, we don't have.

We don't have the front lip and we don't have the wing now, obviously, they get painted, sanded, prepped and all that kind of stuff, but they're taking a few more days because we're wrapping the lip. carbon and we are wrapping the wing in carbon which is a

complete

ly different process once they come out of that furphy and then another mold that we made to be made in carbon so luckily that's not going to be done now but come on I'll send this to paint with ease because we're going to go ahead and get started with it.

We already know that the lips will fit and that won't be painted, so that's fine and we still need to paint the wing supports, but like I said. I can't want to have an advantage so I can get this car back even faster. Oh, I tried to make it so I could separate perfectly in the frame, but I couldn't achieve it, but here we go. I wanted to get a little Walker. before we send off for painting tomorrow, I'm really excited, just FYI, I can get more air in the back, but as of now it's like it's getting a little stuck, so we'll be able to get some more tires in.

We'll just have to do a little bit of alignment and do it and just tilt the camber a little bit on both sides and we can talk a little bit more at SEMA. We were able to make some progress on this. a little bit deeper because it was a little bit thinner, but the fiberglass is a little bit thicker, so it holds us back a little bit, but I'm excited, man, this is such a big process, it's such a long progression that, As you know, but I am very happy with the result. I'm so excited to take this thing off - Oscar, let's imagine that lip and then imagine that wing on the back.

Oh okay, I know a little, this thing barely fits like it's pretty. Scary Cow, today's paint day, we are loading up this car and sending it to SLS to be painted. It's very exciting and as you guys know throughout this whole video, I'm very, very excited about this process and the fact that we just got there. I see it okay a little I have to imagine it painted very excited you can turn out okay I made a mistake and I brought my backpack oh brother so we're going to have to tie this thing around the wheels I guess get into your seat so that Although I took off your shoes, I always send them to the seat, but if you want to take your shoes off, I appreciate you waiting, sorry, what sucks is that this window is not that small, so it was so small, so hard to get out. of not being a child I have been seeing a lot of this question in the comments section seeing a lot of this question yes that is correct English what are they talking about they keep asking is Calvin going to have a wide body Supra .

The honest answer is yes, but. I don't think any time soon I'm really enjoying the original body and I don't want to get TJ's version of this kid right. I want to create something and, as you know, if that's the goal we always have. It'll end up taking four years or something to even install a ready-made

widebody

kit on my car, but I hope with all the work I've been doing for myself and all the work we've been doing together and their stuff. I believe we can make this happen. I have a really crazy idea in my head, but I don't know if it will be feasible.

Tea, Jenna, we'll talk about it, maybe Street Hunter v3e. -This is the first time I've heard this here and talked to John Soval, the guy who helped design the first kit, and he looked at me with eyes like you're crazy, bro, so I hope I can figure something out. and to all those who keep asking yes I will in the future four years ago well hey it's just a good super baby you know what this car hasn't done in a long time no no no. I don't know how secure everything is, I mean, it's all bolted together, but I still wouldn't have done it.

I knew he was going to do it and I didn't say anything. I should have done it. I knew he was going to do it. It's good to hear. the damn Supra will be a Supra, yeah, you know, yeah, I didn't sit in hibernation. Which is idiotic, boy, I'm excited, so leave everything but the wing and lip. I'll bring you the wing later okay popular later this week omg. What are we thinking? I'm thinking? 24 hours 48 hours 69 hours couple 72 hours 30 minutes couple Red Bulls I mean monster I'm sorry, yeah, I'm sorry, I'm sorry, my name isn't true, oh you're right, okay though, my new glasses arrived. in the mail, check this out, these are the ones I used to use a lot in vlogs years ago, so some of you might recognize this angle, probably not or some of you won't even know the difference, most people won't notice the difference. difference but I'm going to change the lens in three two one oh I missed this lens this lens will help us a lot because if you can't tell it's a much wider view no we'll get that feedback yeah hey man. you're taller on camera and Vic let me show you this too yeah look at this so this 10 and 22 so you can see all that zoom in a wide angle too yeah I'm gonna look tall now look at me I know .

What is so good about this lens? We used to use it a lot and enjoy it. Clothes and stuff might appear. You can still get the full face and I took out the whole camera. Most want to notice the difference, but some of you. I could and for those who do, I appreciate you guys too, look at this, look at this. I should cut down Lynch's tree. I would do it with Shamus if I was still a streamer, it boils and twitches, but my computer has been maxed out on all of its similar settings and stuff. and he's literally been shitting himself when we play video games, so I just ordered all these new computer parts, the couch should be, if we explain them, you don't even know what you have.

I'd be honest, I don't know. to be fair, I don't know, okay, let me explain, yeah, okay, let me explain, so TJ's computer has hit a bottleneck. He has an r-tx 20 atti, the juiciest of the juicy graphics cards and his CPU is

complete

ly breaking down, that's why I connected him I told him what to buy i 999 hundred k nein nein nein nein nein okay okay and we have a complement your motherboard is simple we put it in his computer tonight we play Cod streaming follow me on Twitch TV porch laughter do you want to help me install this today yes of course I'm sorry yes he was being mean to me he was being a cow because technically now I have a highly respected computer and Calvin has a much better setup than me, he's a Calvin. dollar yes, I can sew my parents, very good, she is rubbing in this face, you are rubbing in my face, so I'm excited, so no, we have this, it's good, we'll put it on your computer of all ways, there are more than fifty sources offeeding, wait.

Where is your CPU? Is this? Where is the Adreno CPU? Tidy up the CPU, you know, tidy up the CPU oh no, didn't you tidy up the seat? We have the motherboard. Where is the CPU? Oh, TJ, I may not have ordered that. What the hell is this? Oh, that's it. it's for the reserve chip arena Chapter II I know, I don't know what this is, it's not the right picture, even though it was the right picture, even though on the right picture it says KF, but it was suspicious, I need to return it. I saw them all.

My heart is broken right now. Oh, I guess I just acted on camera. Sorry no. I have to wait two more days.