YTread Logo
YTread Logo

mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets

Jan 14, 2022
oh hello youtube welcome back to the savage six channel

supra

we have um we have some rocked up parts we finally have a um we call it a series two we can't get series one anymore no one else this car is a series one but yes series two

front

bar

front

bumper

A Grudy style lip like V2 and mounting hardware from Prospect Prospect Auto. I've seen this car before with a

factory

front bar before I had a vase with the V2 valve side kit. I put dew luck on it, that's pretty terrible. so much glass work to fix it make it fit but anyway uh actually let's take a look at this yeah add a couple extra sticks duct tape um uh ok and first impression is which is actually quite clean. got got this got this bar out uh oem for jdm kieran and rob hooked it up for a pretty cheap price too like 525 530 um i've seen some second hand go for that and people are asking like a thousand bucks for you this is new it's 530 bucks or somewhere there um I'm definitely going to have some fitness issues here I can just say this corner of this wiper tank could be a problem a grill for my old core could be a problem here you may have to do a little bit of cleaning and oh I also have these headlight

brackets

and

bumper

brackets

there are four of them yeah we have both here I also got the side mount side stands which I have never had before.
mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets
I'm sure I'll figure them out and I've got a few other things too, like the bottom mount. I've never had a

factory

front bar before so I'm figuring this out and let's dig it's in there and take a look at some clearance issues ok I have some of this plastic mounting fastener stuff from a nice little kit which i got from uh ebay on the day i bought two of them is a hand is 415 set get all

toyota

clips for massive um just to order it centralized i put a couple in to see what kind of clearance issues i have with this thing and I bet I have massive space issues it has a six inch intercooler like three inch pipe four inch pipe a radiator not a radiator a wiper tank which is pretty extreme really extreme for a wiper tank um um so i can tell you now i'm going to have massive clearance issues oh don't drop that put these up so it doesn't move i don't know what the right fasteners are for this p art but i'm sure i'll find them and yeah let's hold this side up and we meet there we are and it's hitting me.
mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets

More Interesting Facts About,

mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets...

I only bought a little though so I can trim that down no problem blah blah. the valve comes very close but i don't see the need to have to trim that cover on this side oh yeah that bit is going to hit but i could bend it yeah yeah i could bend it bend and spin it that dont worry how its a pipe that cleans the charge plate inlet and just touches the intercooler which is nothing thats nothing at all and looks like a vl turbo stuck on the bottom geez a lot of sticking out on the bottom um and guess what I guess it's a good thing I bought the lip but then again compared to the do-lock bar not much airflow once you get that lip on the bottom it's pretty much cut off of the airflow and it's just going to be what's on top there so yeah that may or may not stay or I could get a west sea bottom lip and I know they have the cutout for the bottom I could do that but for now i'll just deal with what i have and have to cut back probably just that really that's how i can move that path um cool that's acting Usually not too bad um i don't know how they're supposed to do it i guess that just slide under the bar and possibly snap in, but we'll move on to this v2, oh my gosh give me a second while I clear up the rubble.
mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets
So yeah I've got this handy little mount for the gopro so we can um actually I might get you on time a little faster unwrapping the crap isn't that interesting mm-hmm first so take a look at it and well, yes, it is more or less the same classic. a little crease in that so it's uh you know look how much is getting how much will this actually cover all of that in the cooler look what I mean by the um there's no air going through here to get to the bottom of the interval not too much of a fan of that but um it would be so yeah i guess it gets rid of the vl commodore look but i'm not happy with the airflow because that's a lot of intercooler you're not curling maybe i can make a good hole on this day or something g or get a different one like the west sea falling over the top and bottom has a vent this open event that's yeah that's not terrible i guess if they see it was the whole intercooler was open which was pretty awesome great for airflow but just fiberglass crap so anyway uh now we got that open we'll take a look at this now just got that one bar that lit up, we popped that lip just off ebay somewhere in NSW or something um front bar came from oem from before jdm oem for jdm chris and rob there this this here is mounting hardware for the lip to bar and let me open this sucker one more time one handed and this lip came with uh mounting hardware so that's good and oops i just got that out there we go more frayed bubbles but sorry guys empty that's it all in the tube the box, I should say, but there goes, well, it's

prospec

t

imports

, um, yeah, Tony on Brizzy. something like 12 hours or so and these are the alloy mounting hardware so you have your sandwich top and bottom and then your sides there they go left, right, left and some accessories stainless steel mounting so it's um actually not bad at all i think that was it and it only took like a couple of days to get here which took a while to get here but i say if i should mount the lip on the bar attach the bow and then clear the areas where both the lip and the whip and the bar will need to be cleared so I'm going to put these on time lapse and mount the gun bar together and put on get back to you when i get everything in the car and we can start to work out the issues and areas where this doesn't fit so that's ok doggy yeah it fits pretty well the brackets from the

prospec

t

imports

not bad were missing a couple of screws, although there were lots of watches, mounted ones of nuts but luckily the lip actually came with a little hardware kit so i just stole a couple of bolts on that and i have it there just wit h the tabs on top there this washer tank is definitely going to be a problem.
mk4 toyota supra new factory oem front bumper and v2 lip install with prospec imports brackets
I'll take the grinder and cut a v in there. it sits in the back no it's not bad there's that tab down it's just rubbing so i could fold the plate then head to the top but the only real problem i have is just this bottle of washer i will mark it up and coax it with a grinder and i might even drill a few more holes and put some bolts on each side to keep it strong ok i have my little uh milwaukee little brushless chop saw it's 12 volt volt ranges it also has a breakout so plenty of trigger it will break four reverse a little handy job and I drilled out two spots put in some extra bolts and roughly scored around the wiper bottle so I'll cut cautiously a triangle on this and I'll be done with it yeah probably You should have two answers let me put them down and I flip it over to do the other side hmm it's better than certain things oh that sucks that really sucks and that's Okay. that fits nicely i trimmed that little piece of plastic on the bottom there so it fits nicely all i'm going to do is put these side brackets on that yeah look at the right front bumper though it says left this one says front law.
Bumper that now has a bar on it well I would say it's the if you can see it once it was curved once it was flat I would say the curved side comes out underneath and bolts on this is taking two hands so I'll um, let me answer you when I go to look for them there, so decide fast enough if there are plates. I had to trim that section here just a little more just a little more. I have a little gap here under the headlight and here and that's mostly because my trigger valve is hitting on the here um side but that's fine for now.
I'll get to it a bit later and it fits pretty well. I just noticed that one side of my bun actually zips too low than the other side. um, I have some side markers. It's just to fill in the holes I have, it's serious, so it has the side marking on the side panels and front, and I have series 2 headlights that aren't too big a fan of this weird gap. I don't know if there is a difference between series one and series two, but it's more or less the same on this side, there is also a little gap, but overall, that's not too bad, it looks even better when it's painted, i still have to transfer these side markers here over this dummy but that will um now i'm going to rest i just had the needle covered so i feel pretty bad but anyway yeah that's the first bumper which i got that actually fits pretty good, and oh its a factory bumper so anyways thanks for looking catch us later subscribe and message like above that's right it doesn't cost you anything to catch many of those hello you

If you have any copyright issue, please Contact