LZ R34 Nissan Skyline GTR Midnight Purple III Vspec Detail Series E3: Polish and Wheel CoatingFeb 23, 2022
I thought and use them like this. Is he going to die when he is 38 years old? I look, I asked. I was like. I know I was like. Shulman doesn't always wear gloves. Is there any reason? it's ok sure it's not ok you should never leave the
coatingbottles open it's ok ok t It wasn't that they didn't communicate it to me ok my instruction was very good this guy isn't it ok so you should have been in our class? five drops i've been telling you to take it for years i don't even have time to brush my teeth dog well you could make time and you'll find more time three four five how come that's good i don't know what at first we were doing little sections and then i hit it Notice that like you do the whole
wheelface here, no problem, are you serious?
Who is your dad? You know? I will trust me. This is that he was taking too long. Otherwise, time is money. to say because you can see the chassis in the sun you can't see it for sure you can i can see it right now i can't you can't see it in the gloss you can see it on the lip because the lip is glossy you can't see it on the side and you're not wearing enough you should be able to see it you should change the hue a couple drops in there good job keep it vision in the bottle who's making you use that would entertain all the cracks remember the twists if you need it that's the point ok so hold on last time you're gonna follow rolling and then i did this folks yeah the key with with coding is to stay organized you know a lot of times it makes sense to start near the valve stem so you know where it is where it was especially hard to see so look see now Haley changed the color long before it was just getting there these words use enough now level it out so there you go so not all
coatings are like that but this coating is super forgiving so you have plenty of time to do a bigger area like this and just clean and clean we're going on this ultra crystal serum yeah push your crystal serum light you got it good i'm going to do the center and then clean it and then clean the excess yeah you know start cleaning where so do the barrel hair and then go your same way and don't just clean the surface so don't
polishit well you just want you been
polishing it smooth clean it ain't trying to clean it up i'm just trying a latino man who said me to level it with this yeah well you're leveling it you're not cleaning it you couldn't erase it all but you just want to gently make sure everything is level no you have high points and it's really hard to make a high point on a satin
wheelyou go to get your coffee are you ready to work? so flip it over and let her go for sure or i do the other first video XO first don't finish the me this is so much easier this knocks it down a little bit takes up the whole surface don't miss you're missing a lot of points now i'm back on it i'm back around the outer edge and then I go from here and go inside this you got it move on I'm going to start polishing ok ok back to the capitalization.
More Interesting Facts About,
lz r34 nissan skyline gtr midnight purple iii vspec detail series e3 polish and wheel coating...
I can go straight to life. I'm going to tackle this curve here, now, now that we're at the back of the drum. That's so good. I can't wait to see this. Up here amazing this I thought this would all be fucked up you picked a good day to come and see the chaos a little bit of solvent popping up here but it looks so much better yeah when the solvents come to the surface but it never really escapes it leaves like a little bubble of air underneath, this is what solvent pop looks like. I don't like how this white didn't really get cleaned up. it's we'll get you all we're going to finish composing do the lights do everything and it'll be interesting to see if we can bring them back to life but we'll get back to you when we have something that changes well so now let's finish the finish lead It takes much less time than we did. all the work removing the blemishes getting rid of getting rid of as much of the etching as possible because well what will really make the car look good if we polish the glass don't close it just let us I'm going to need to get in here so we finished polishing we knew much bigger sections because we've already done most of the work so now we're just garnishing it and this paint is really responding well to finishing off the car which normally Jess finishes very well but we were we had a little bit like I guess you could say, like the enamel is burned on the surface.
I don't even know how to explain it but we've been able to take it off and embellish it even better with the finish but I'm splitting this into thirds or before splitting it into s ix sections and we're just doing three nice slow nice controlled passes just to relax. I forgot one yeah dude this is the fun part actually the fun part is Jess's car next one ok it will change your life you will be affected for the rest of your existence and starting off we should cover this is much better not perfect I mean nothing in this car is going to be perfect but pretty good nice that was worth the effort i think taking it apart clean it this had a lot of towels like towels in a straight line marked with drying marks that they were able to get out pretty quickly and ease that i think i even got all those scratches in a straight line there were a lot of them there's still a little bit in this crack but it looks noticeably better so we're rolling around the car here we have just finished all the perfect minutes everyone the Sonics on the yellow rig are doing the last skirts to the side I did the door jambs Adam put the wing back on oh we need to hit the little flaps on e l end and I'm going to polish the glass here real quick we're going to get the glass out and then we're going to clean the car with the eraser and coat it nice so I finished the glass what I did was polish on speed six and again we're just cleaning the glass polishing the glass isn't really a thing i mean you can but you won't get anything skimming the scratches so it's a pointless move but what i'm doing i'll show you the moment i use the Nano to get here to the edge and clean this edge.
Really, we're just cleaning it up more than anything, but we're almost done. The price is to finish. pull up the front bumper we're in a corridor and start decoding ok so that's a wrap for the finished glass polish now we're going to clean all the polishes clean this whole area i have to run home to grab this. some finishing solution because we're going to do the trim and the glass and all that, we're also going to clean the glass number 39 and then we're done, so maybe we'll end this episode here and go to the next episode for all the final steps.
I'm going to put the wheels back on and finish this. I will do everything. tonight
If you have any copyright issue, please Contact