YTread Logo
YTread Logo

LED Streifen anbringen

Dec 10, 2021
So everyone welcome to a new video on LED strips. I've shown you in this video here what you can do with LED strips and it brought up some questions like what do I actually do? I still have a leftover piece of LED strips. Or can I control multiple led strips with one remote or what should I do if the socket is in one corner of the room, but the led strips are going to be installed in a completely different one? That's what I want to do in this video Please clarify if there are any questions she is always happy to write them down in the comments and as always you can find everything you need to rebuild in the info box below the video so have fun building led strips she follows from the fact that you first have a power cable and then that power supply with the integrated receiver for the remote control and then a single led strip that can then be connected to the faith rn operation can be operated accordingly an rgb strip has a relatively simple structure, you always have three 4 kg white leds and then always a contact surface with the markings 12 volts gr and b, that is, current green, red and blue, shorten the strip of led exactly at this point do you have a contact surface so you can display it from there or split it?
led streifen anbringen
A question that I have heard very often is the following, namely if it is possible to operate several led strips with one power supply and one remote control and the answer there is a very clear year ahead with a quadruple brightness of this type can eg to operate four led strips at the same time with a single power supply, but of course there is also the possibility of connecting a double, triple or six-way splitter, depending on what you intend to do in the first step of the installation, our quadruple copper pin into the respective white connection the e The end result should look like this: four copper pins protruding from each of our adapter pieces.
led streifen anbringen

More Interesting Facts About,

led streifen anbringen...

Now you could easily think that you would just plug in a power supply and the spindle is finished. But there is still a small but important problem, although we have it open on one side with our cuttable led strips, which would have to be cut exactly by the contact surfaces, and on the other side with our four copper needles, which we have just finished with such care. stick in adapters So what do we do now to solve this misery? Is there a proper adapter cable that can connect these two ends so I would buy the correct one?
led streifen anbringen
You will find everything you need for this, as always, in the info box below the video. The good thing about this cable is that on one side we have the proper connection for the copper pins and on the other side an alligator clip where you basically just put the led strip under the contact and slide the clamp secures and keeps everything solid like a rock when you have plugged in the power all four led strips should light up if like in my case there are two more led strips that won't light up just open the clamp again and flip the contacts the other way you probably connected them backwards that's a common mistake when using these clamps and we're done and we have 4 strips that we can control through our splitter with a remote so in short you basically need a quad adapter power supply unit the adapter cable between our multi adapter and led strips and otherwise you could just shorten any length of led strips and connect them with our splitter to make them stand leftover zas of criminals everything is ideal. the next variant i would like to show you is the ecc connectors and they work it's the same there we just have two clamps on each side under di If we slide the led strip in and make sure the symbols ie rgb etc. in the event that the LED strip and the exact one are at the same height, this option is perfect, for example, behind the TV or behind the PC monitor for cooling. lighting concerns building this variant is actually relatively easy we don't need any additional adapter cables but we have our power supply in the top left hand corner and the start of the LED strip brings this to the first corner of our first character and You simply cut it, you take it to the countries that need it, guide it around the corner with the triangular adapters and the last piece you simply guide it down again and the snow falls where you want to cut it and I already drive it myself.
led streifen anbringen
I use the variant with my pc setup and we are most satisfied with the result. I have linked you to the Egyptians as always below in the video description. The next problem is what to do with your led st. tires is the fact that you say ok I have a socket on the floor but I would like to use my LED strips somewhere on the ceiling the cables supplied are basically too short for such applications ie between the LED strips and the plug also to be able to bridge a few meters without problems there is a classic extension cable of two meters five meters or even ten meters there is absolutely no problem the extension cables have exactly the same connections on both sides on one side the connection to the power supply is not a problem on the side to the leds you need to make sure you put a copper needle adapter on top again to make everything possible now we have exactly the setup i presented before i have our quadruple adapter with the four led strips only with the big difference that we are now between the power supply and the beginning of the led and a 200 m Others such as extension cables Among the last configuration that I present to you, we always come into play if, for example, you have shortened a led bar too soon or you want to save distances significantly less than two or five meters and, of course, we have again an adapter wire on either side of these snap clamps under which we just slide the led strips into the contact underneath to make the clamp and that's it you'll see it all repeat itself so from a certain degree you basically just have to know which adapter suits which situation The principle can also be used very easily at very short distances With a clip like this you can, for example, rejoin two LED strips that have been cut too short directly at the same point without have to have a connecting cable in the middle.
Just slide them under again. Make sure you don't do it wrong. at man the cable rode freely once again thanks so much for watching hope you liked the video if you have any questions just write them in the comments below i would also be happy if you would give me a thumbs up and a subscription so you don't get more videos we missed it and also took the trouble to link all the adapters and app options in the info box below the video and briefly explain what you need for what so Marko is having a lot of fun with your project this year

If you have any copyright issue, please Contact