YTread Logo
YTread Logo

How to Paint Kitchen Cabinets - DIY Network

Feb 27, 2020
Kitchen

cabinets

take a lot of abuse and can be expensive to replace, but don't worry. I'm going to show you how to take your old or worn

cabinets

and make them look new again with a coat of

paint

. First you should know that everything is structurally sound if it isn't, don't bother

paint

ing them if the doors are warped or split, you may be able to replace the doors and then paint everything else to match if the boxes appear to be in good shape. condition, it is important to know what material your cabinets are made of, wood cabinets like these are easy to paint as long as you scratch the surface, but there are certain cabinet materials that are not as easy to work with, it is important that you have the right product for Metal and wood laminate cabinets can usually be repainted fairly easily.
how to paint kitchen cabinets   diy network
On the other hand, plastic laminate cabinets can be difficult to work with and require special painting. Most professional painters will use a paint sprayer when working on cabinets since it covers a lot. of cabinets in a short period of time, but these things work best with oil-based enamel paint and today we're going to use latex, we want to use latex because it's easier cleanup and shorter drying time, so our The best option for an applicator for latex is the foam roller. These are great. We also have some little foam brushes that we're going to use now.
how to paint kitchen cabinets   diy network

More Interesting Facts About,

how to paint kitchen cabinets diy network...

The last resort for the applicator will be your old brush. The only problem with the brush is that. You will have many brush strokes, it is difficult to get a nice smooth finish, so you will spend a lot of time between coats sanding it to try to get the look you want and which is the best option for today. Baby, now that you have assessed your work and cleaned your cabinets, it's time to get started, start by removing the cabinet posts and then remove the doors and drawers along with the hinges, if you plan to reuse the same hardware, store the pieces inside. plastic bags and place them inside the corresponding cabinets where they will then be easy to locate, this is where a little attention to detail makes your life much easier in the long run number each of the doors and stick a piece of tape with they. number on the back of the door and then also on the inside of the cabinet, that way you'll know exactly where everything goes when you're done number one, the next step is probably the most important, you won't get a good paint finish on your cabinets Unless they are squeaky clean and in the

kitchen

these things are covered in grease, food, I don't know, probably even some spaghetti sauce, you want to make sure all the things are out of there, you can use any cleaner.
how to paint kitchen cabinets   diy network
You want that, but more importantly you don't want to use a cleaner that leaves residue on the surface. Now most people are going to use a teaspoon. It is a trisodium phosphate. It comes in powder form. You mix it with water and you put it on the cabinet, it removes all that grease, we're using a premixed form, it's actually phosphate-free and we're going to spray it on, but keep in mind that any of this stuff you're using can dull the finish of any shiny surface, including glass and aluminum, so be sure to cover it and if it drips, rinse it off immediately.
how to paint kitchen cabinets   diy network
Now you'll need to put on gloves and definitely some bold glasses like mine spray. Apply the solution over the entire surface of the cabinet doors and drawer fronts, let it sit for a few minutes, and then wipe it off with a clean towel. A lot of dirt comes off here so you can see how much better your cabinets will look without it. Some cleaners may need to be rinsed with water, but ours just requires a good cleaning. Be sure to read the packaging of the cleaner you choose if you have a lot of dirt on your cabinets like these. use it as a six in one painting tool and very gently go into the corners and remove all that excess and you can see in this particular cabinet that I'm getting a lot of things covering the backsplash of the countertops and appliances with a drop cloth and then hit the cabinet boxes with the same cleaner so now that we have all of these cabinets clean we're ready to start sanding them and the idea is we just want to roughen the surface so it will accept the paint more easily.
I'm also recording. Remove any areas of the interior that we don't want painted to have a nice clean finish. When it comes to sanding, these tools will make your job easier. We have a random orbital sander with a finer grit sandpaper. here 200 to 220. Actually what we're doing is just scraping the surface, you don't need to remove all of the stain or if you have painted cabinets you don't need to remove all of the paint, you just want to sand it off so the new paint can stick to something, so this is going to be used for the flat surfaces here and here and then we're going to use the sanding sponge or the soft sanding block with the same 200 to 220 grit for these edges. any edges that are beveled where you need to go in and work it, the most important thing is that you don't want to change the profile of your cabinet doors and you don't want to make any indentations, so once you have sanded everything done, you have to get rid of the dust before before starting to paint, so use your vacuum cleaner to remove all the dust and then go over it again with the tack cloth to make sure you have a nice smooth finish, a small handheld vacuum cleaner or a small handheld vacuum cleaner or a wet dryer.
The vacuum works great, especially when it comes to the cabinets themselves, when it comes to the fronts, a pneumatic air compressor works great, especially if it comes to cracks or trim details, when you're done prepping the cabinets, take a last look if there are areas. with difficult stains you can use denatured alcohol to remove that stain and also if you have a material that you cannot sand like this paper veneer because you would ruin the material you can use denatured alcohol and a little steel wool to remove that shine, so it has been cleaned your cabinets, you've sanded, you're pretty much ready to paint, but what you don't want to forget to do now is prime, the primer will do three things for you. one will help the paint adhere better to the cabinet number two will give you a better finish with fewer coats of paint and prevent the wood grain from showing through and lastly these things will take a beating you want your new paint The job will last a long time and that primer will help make that happen.
I'm using a water-based primer that will be a perfect base for the semi-gloss water-based paint we'll apply the next time it's used. Say oil-based paints were the only option in a

kitchen

, but today's water-based finishes are easier to use and just as durable as their dirtier, smellier oil-based cousins, plus which are much more eco-friendly, so if you are repainting cabinets that are already painted, you can probably skip the primer unless you are changing colors. If you're going from red to white, you'll probably want to prime it or sand it all the way down. bare natural wood, you will probably also want to apply a primer if you are going to paint the cabinets one color, ask to have the primer stained the same color and don't forget to check the drying time on the primer can so you know how long it needs to set before starting to paint.
Typically if it is very wet or very cold it will take a little longer to dry, so you have laid the foundation, the primer is finally dry and now you are ready to take it to the finish line. You start by painting the inside edges first and the face frame openings, then the exterior sides of the cabinet, and finally the face frame fronts. This allows you to quickly work on less critical areas and allows you to see and correct any drips or stains. The most visible areas Next, you will paint any of your doors and drawer fronts and any molding you may have.
If these parts have raised or routed features, be sure to flow the paint into the cracks and corners, but don't allow it to pool. In these locations, this color will totally brighten up the kitchen and eliminate that ugly old dated oak. A foam brush works well to get into creases. It is best to start with the back of the door and once it is dry, turn the door face up. Paint the front this way, the front of the door will be able to dry face up without the chance of staining the finish. We are also using some risers we made from finished nails and scrap wood that allow us to flip the doors when they are. still wet or sticky leaving almost invisible marks no matter what applicator you are using, brush, roller or sprayer, always apply the paint in thin, light coats, but make sure to cover all areas.
Drying time varies depending on the first coat, but should generally be dry in about four. hours once you know it's completely dry, you should take some fine grit sandpaper and go over it. Now you're not trying to remove any of your new paint, you just want to make sure you have a great, smooth surface for your top coat. of paint, so what you're looking for are small spots like this, they should come off immediately with the sandpaper. Be sure to wipe away all dust with an anti-static cloth. Apply the second coat like the first in a nice thin layer.
Two layers. of paint plus your primer should be enough, but if you don't get the finish you're looking for, feel free to apply a third coat, looks great, eh, total time for this job is two days, price is only 100 and that's much cheaper than new cabinets

If you have any copyright issue, please Contact