FERRARI 488 PISTA WITH IPE EXHAUST, HRE WHEELS, NOVITEC SUSPENSION.

What's up, guys? Another beautiful day in Miami, so we have this autobiography of the long wheelbase Range Rover. I had the opportunity to drive it over the weekend and it made me reconsider everything I wanted in my car. I usually like fast gearbox cars that I bought in this one. and I felt like a king, like a complete king, so I just wanted to show you a little bit of what we're doing. We just recovered it from the wrapping site. We did the 3m stealth black all over the car, it was originally gloss. black, so we did the wrap, we're going to put anarchy

wheels

on it and 37 to 24 inches will be very, very big, very nice to show off the brakes, so if you take a look here, the brakes are nothing to write home about.

You know, they look a little puny, however, we are doing a Brembo big brake upgrade kit. When you see these big Rambos, you will be absolutely amazed, especially with the open design we are doing on the am 37, it can look really great. I already made a super sprint

exhaust

, so the super sprint

exhaust

comes from Italy and we installed it yesterday. It sounds very, very good. This is the first long wheelbase Range Rover in the US of this model with an exhaust and we're also going to make a tune, but what I really like about this car is the long wheelbase, the huge doors and the interior .

Now you know why I felt like a king and everything I see, man. It just makes me want to come in here, take a quick nap. I don't think Ben will care at all and just relax. Oh yeah, yeah, wake me up in about an hour. Well, mid-afternoon or afternoon. Dale just woke up from my nap. Alright, if you remember a couple of videos before our customer received the gun here at Wills Boutique and now it's back with the license plate roof and it will be done by Nova Tech Springs, as always, lowering the center of gravity.

I'm going to do the HRE

wheels

. I don't want to reveal them, you know, I don't like doing that. I would like you to see it in the car first, but it will be much wider. I'm going to make the 13 inch wide rears with absolutely crazy 355 Pirellis, these are just 305s like I mentioned, very very puny compared to what we're going to do with them and again you have to look at the offsets, look at this factory , it's a Monster Truck comes from the factory, that's what we're going to do with Nova Tech Springs and it's also going to be the first track in the US with an IP II exhaust.

Wait until you hear this. We made this same IP exhaust with your previous one for 580 Speciali, naturally. V8 aspirated so it will sound a little bit different as this is the twin turbo but you will still hear all the terrible spools, all the whistles from the turbo, it will be good first for me because we have never heard it before but it will sound. good mr. Wynand did that doesn't translate to my love life although, by the way, I'm not the lord. one and done, it's just for video captures, so today is the day we do the brakes, we do the wheels, we do the tuning, so basically he's going to finish the whole build.

I'll show you the wheels there in a moment, but I wanted to check out the Brembo brakes first. Now these are going to be some amazing brakes. They have eight pistons. They measure 412 millimeters. Look at this, oh boy, so 412 millimeters in size, look what they're up to now. There's no way we can. I came out of the anarchic wheels showing those little brakes, those little factory brakes and then here's the piston caliper with a special gold finish. The client did not want the options that Brembo has from the factory, which were red highlighter yellow, why did you want black, a special color? to match the wheels, so you'll see this is a BMW Gold, it will match very very well with the Anarky wheels here, so this is top notch, it's beautiful, so we saw the color of the brake calipers, now let's see the Enter the key am 37:24 for ten and a half huge wheels, that's what you need for a long wheelbase on a big body, let's see where we start this ending, crazy, crazy, crazy, crazy, so yeah You take a quick look at it.

It has a two-tone champagne face, so the actual face here is brushed, but the windows, which are a surface area between the spokes, are set on a rotating machine which gives it a marble-like stone effect. , so it's actually two-tone. brushed champagne face with champagne stone windows, this is what I told you yesterday. There's a lot of surface area that can be seen beyond the steering wheel, so those Brembo calipers I just showed you will explode like crazy. I really love this man. I can't wait to see this build, especially against the stealth rap we did. It's going to be something beautiful.

Look at him just relaxing. I wish I could do that. That was me yesterday taking that nap in the rover. How are you? you say that's enough, okay, okay, more real goodness for today P 107 SCS look at the rear pad to save weight, these bad boys are pretty light as you can see, so this goes with the gun, my client with the gun you love and OEM Also, look where the car looks like it still comes from the factory, but you want the aftermarket wheels because HR makes it easy on the prestige, lightweight satin black finish, very simple 20:21 setup, just like you had them in a Speciali and look at these giant tires.

Pirelli PZero 3:55 wide, once we remove the OEM wheels from the car, we will place them side by side so you can see the main difference between those tires and the ones that come on the car from the factory. Look at this, womp. womp womp Michelin tired baby no, that's not a front tire, this is a rear tire, rear tire from the 305, going to the 355, going from Michelin to Pirelli, the way the automotive gods intended it to be, since They work together very closely on their F1 program, as you can see, this is the reason, another reason to get aftermarket wheels, wider settings fill the wheel better when you see it on the car, we will appreciate it.

Danny has the exhaust outside the car, as you can see, not this. Too nice factory exhaust, we're replacing the downpipes and we're replacing the muffler part, so there's a lot of expensive heat hitting this thing and as you can see by the way I pick it up, it's extremely light titanium. IPE, this is a beautiful thing. I'm very excited to hear this as I mentioned that it will be the first gun in the US with an IP escapement, so the first time I hear about it will be the first time anyone hears if it's basically necessary.

Take a look at this. I'm going to go to this bad boy right here, it'll fit right under there Danny, although the magician will do all the magic, so that's not it, let's not eliminate any more, definitely our good, please watch me work. in this saint, you are not the man, the myth and the legend, look at that tiny little one that appears at any moment, anything right there, look Oh, I have a guy that parallel parks and I started getting stuck in the middle there too and I got my knees smashed idiot bro isn't it amazing they're not going to fall off I just texted them hopefully they'll call us back let them know the cars are ready I was expecting it tomorrow Saturday but like can see outside, Rhea stayed a little late, it's 9 pm. 9 12 so I hope it's a nice little surprise, Graham, it's 10:30 at night here at wills boutique.

Many thanks to Danny, our technician, for calling so my client could pick it up first thing tomorrow morning. I'm very happy. he will be extremely happy. I mean, how can I be happy about this? Check out this HR e P 107 SCS 21 by 13 in the rear to fit a huge Pirelli 355 tire that I showed you before. It turned out better than I thought. I thought it was going to be amazing. I'm speechless when I look at it to be honest with you. Today I'm wearing the Nova Tech t-shirt because we're walking around Nova Tech Springs that make the HRE wheels.

I look even more amazing with the stance, since like I said, I'm running out of superlatives for this setup, it looks crazy. I'm in love with her once again. Many thanks to Danny, the technician, for staying late. I stayed late. I'm tired. Franco behind the cameras is tired, so I want to thank all my team. Thanks for looking too. Stay tuned to the channel. Subscribe. Press the Like button. Give us a comment. Let us know what we want and what you want to see. What do you want to see us make different cars? Different constructions. We would love to hear from you.

Thanks again.