F350 on REAPER WHEELS Literally Tills FROZEN DIRT

Hello and welcome to Whistle Diesel Industries, where we're working on the future of the world's wheel technicians. Whistle Diesel Industries has been working tirelessly to bring you the next generation in wheel technology. Today I am proud to finally present to you Super Readers 2.0 Pro Plus. pro max is developed alongside the intuition of our next level technology, look at that ankle biter, can someone clean this up? We work professionally to manufacture your

wheels

. Our new prototype will be attached using a separate set of the original adapters on top of a set away. starting from the stock wheel spacers on top we placed it away from the stock adapters on top to sit away from the stock wheel spacers so since we built the four wheel Reaper

wheels

I planned to make wheels for the truck and I never had the right truck to do it because it had to be something that didn't have a lot of value, something with a short wheelbase is a really practical thing, so we finally have the right truck for this, so it's a SEMA truck from one hundred thousand dollars like any hydraulic level lift. so I'm kinda interested to see how well the lumens and body panels hold up to big kids like this puppy here let alone when I lower the lift and the wheels go into the sides of the bed and everything, it will be a big mess, don Don't worry about being funny, now we start early in the morning here it's like five degrees so everything is

frozen

, absolutely rock solid, hopefully they don't sink too much and then as the day, it will get much muddier.

Very quickly this turns into an absolute, muddy mess like you can't even get in and things like your six inch foot. I wonder if anyone on board can tell me why no, my doors will close. Why do you listen? I didn't wash. that today I saw this three days ago my door won't close physics props what's here I was ducking now what oh we have it we have to start rolling it's not there or it's low with the hubs unlocked they don't know the difference that's all I need you to remove these wheels, we're going to lock the hubs and save it for a low torque lock because they're

frozen

, the hub on the other side locks, so we have three-wheel drive, we give it the beans and I.

I guess I'm going to have to like everything enough, yeah, the moment I stopped here, go ahead, yeah, you're on the other wheels, things are just destroyed. I was as tough as he went back and forth every time he hit. a soft spot, the whole front end just fell down and I had to like a canyon through, look here, on the right, stump guy as I was coming down this hill when I go down the hill, a duck here there to tip it up, that's a crazy, these are just In fact, I kind of like the tiny look that is a quarter inch steel angle.

He was pedaling to the metal and not recovering. He is so stuck and I felt like I broke something. I pray you break a front axle dice. Comes back. I think I moved the whole front axle up there I think it looks weird those slide our links work yeah you push it forward thanks olive oh yeah because remember those sway bar links where you push it forward forward , to another level, like up and down it breaks look the tires spin that way the other tires turn yellow you did it racer son what did I do great that bar in the front it did break the right half this doesn't look healthy right here yes if the trip PFC if the trip The odometer was on or if it only had 6,000 miles, I say one has 6,000 miles, yes it only has 6,000 miles just to take that into account, breaking your head, oh my God, this wheel is simple now, what's closer? minute, yeah, that's a little close to the bed, just push this to get it out of there, how come that didn't go in there?

Oh, it's like against right now, look at this, how did that not get in there? Yeah, if you'll all excuse me for putting the wheels back on I think it's pretty clear that we're not going on a sunny day cruise today look at the ice we hit it's sunken in its it crashed into that ice so yeah guys just it I want to make this clear it is not the result of any level, if this were a ball joint, there is only one ball joint on the original tie rod, so when balancing it I mounted a heim joint, here we actually broke it a couple of points, but This heim joint goes on the original steering rod. to this bolt it goes through so we actually broke this bolt which is a big full eight five eight we put it in there but I'm pretty sure there's nothing wrong with this so we should be able to screw it back in but yeah .

It didn't look good to me, everything underneath was in bad shape when this thing broke, so all the wheels came back on too. Oh, the truck heals itself. We took out this heim joint for the steering. He says it's cut. I said it right away, so I DMed him at whatever level and he said it takes like 12,000 pounds of force to break that joint, so I was like, oh you know, that's cool, we just did it, it went like 20 miles per hour on the ice so they are sending a new heim gasket since we started it but those metal wheels were hanging over the side and in the front of the truck they kept going so the wheels stopped on the truck they kept going, so I peeled off this whole front part. and just peel off the quarter inch steel steering with bead welds along the entire thing and they're breaking into the bed, look at this each one, this is an angle, look at it tore it apart.

I wasn't expecting this, guys. not really sorry, i thought this would last a while, we really tried here, like you can't get it much more durable than that unless you move a huge barrel, unless the spikes are this long, but then they're like small chubby wheels, yeah Jason, sorry about your trashy welder, hey, you know what everyone always doesn't know, no one wants to listen to what he says, but be happy anyway, yeah, look at all the don't know They broke up, that's all I'm saying, you know? I haven't even fixed the deal, they fold, look, hey, come out, open up more, hey, kick your ass, boy, we've got security.

I guess our jennszoo prototypes could use some work, but you know what they say, I forget what they say. Well, thanks for looking at the store with some lethal industries for your stop, okay, thanks for looking at our prototype. It could use a little more work, but you know what they say, so thanks for watching, I was really, hey, I polish the face, but you know. do against