Dollar tree ribbon organizer idea diy / dollar store ribbon display idea / ribbon twine organizer

What's up, friends? Tina did it here and welcome back to my channel. Some of you have been requesting a tape

organizer

, so this is what I came up with. Everything in this video can be found at Dollar Tree, so if you want to see how I made this. Keep watching, but before you start, if you haven't already, be sure to join my Facebook group called Tina, she did it with the pink hearts. You can find us there and see reenactments and how people took the

idea

and made it their own. Make sure to join us, we are all friends and treat each other like family and also make sure to follow me on Instagram.

Tina did it and you can message me anytime there. Make sure you follow me and yeah, so let's get started. We're going to need five of these 8 by 10 squares. I know there's only four here, but you'll see what happened later, so we're going to need five of these, so we're going to reserve one because we're keeping the glass with that one, the other four frames, they will take everything else, so you will only have one, be careful. I would like to mention that one of my frames ended up being broken when I opened it. it still works I'll work with it ok but just check your frames before you buy them but what you want to do is take the other four frames again and take everything out so set one aside put the glass away and then the others four get everything, no. glass no paper nothing so now that I've got everything out I'm also going to go in with my wire cutter or you can go in with scissors.

I think it works the same way. I'm going to take out the little clips. the back of the frame, just move it a little bit to the right and left, but be careful not to break the frame and it should come out, so I'll do that for all of those frames and I'll be right back. You should have four frames out of the way and now I'm going to work on the one with the glass, so I'll take everything out and leave just the glass. I am only using the glass in this frame, so can this part be optional?

You can decorate it however you want. You can put fabric or you can do what I did. I went ahead and here I just show you, just fold it to size, cut it and then just put it on. I put it on the glass, but I chose contact paper that I bought at Dollar Tree a while ago, measured it, cut it, and basically I'm going to remove the backing. It's like a sticker, guys, so I'm going to take it. I will remove that and place it on the table and use that cardboard. See the cardboard that comes with the frame?

I'm going to place it in the center, press it down and fold it all over. the sides so this is what it should look like and I'm just going to place it as it is in my frame but before I do that I'm going to take the glass out and I'm going to go in with my glue on my 6000. I'm only using e6000 for this entire project because I'll be hanging this and I don't want anything to fall out so I'm just going to put e6000 on the inside corners of the frame and put the glass back down.

This 6000 is more of a permanent fix and takes a little while to dry so I'm just going to put the glass on and let it dry for a while and yeah like I said I don't want this to fall off so that's why I'm using e6000 and when I'm done with that I'm going to put the paper that I was working on before and this frame also comes with this piece of cardboard and the backing, so I'm going to put everything back on that. a frame and then close the clips and this is how it should look and again you can decorate it however you want down there you can have flowers if you want and just put them in the frame, but anyway I decided to use the contact paper and now I'm going to take my e6000, surround the whole frame and the frame itself put the e6000 around and I'm going to stack my frames so here's my first broken frame so if you end up with a broken frame make sure you put it maybe the second one right here so it has weight in the middle and you can't tell if it's broken, so make sure you outline it and do it again on East 6000 and the next box above, just a heads up.

You will have a lot of glass from the frames after you finish this project. I have like three or four and I don't know what to do with it yet, but I did a little test. I tape it down with my stick that I bought at Walmart. I'll tell you the size in a minute, but I realized when it was only three frames and I stopped there, I was touching a glass and they wouldn't spin, so I had to go in with my six thousand again and put in that fourth frame, that's why I finished, that's what I was telling you at the beginning of the video, that you're going to need five frames, not just for that, I ended up pasting that one.

I went down and went out and bought another one, so now I'm going to grab this Ginga tower set from Dollar Tree. I'm just going to use ten of them and I'm going to take my jet black paint and I'm going to paint just the front the front back and the top and the bottom I'm going to leave the sides umm not painted because I want to put that's where I'm going to put my glue and I don't want the paint to peel off and fall off I just don't want that so leave it unpainted so now I want to see where I'm going to place the Ginga pieces so I'm going to leave my sticks.

Turns out I have. I have three sticks on hand, so I'll separate them. Make sure the tape doesn't touch the frame or the other frame. You want them to spin without hitting each other if that makes sense, so I'm just going to place them and then that gives me a guide of where I need to place my arm, my Ginga pieces again, you guys take this

idea

, make it your own, play with the colors They can even spray paint the frame if they want. You can use a larger frame if you need more space, so take the idea and make it yours now.

I'm going to go in with my e6000 and I'm going to put it on the Ginga piece and I'm going to place it under each each stick because that's what's going to keep the sticks in place when it's standing on the desk or hanging on the wall, so I'm just going to put them on its place and I will do the same on the other side, as you see here. I also place three on the other side and now I'm going to go in with my other pieces. I'm not going to put three up and three down.

I'm just going to create a little L just to give it the same look around you if that makes sense and that's it, so two at the top two at the bottom that way they hold the frame and hold the frame up. Also let me show you from above what it should look like, so here's how. Guys, it should look like this, three on each end under the stakes, two on the bottom on withá, so it can support the frame because we're going to cover this with another frame, so I'm going to take that frame and once again take the Back Up and I take everything out, the glass, the cardboard and everything, and I'm going to go back in as well with the same process.

I take out the clips and this is what it should look like. I'm just going to put the frame in to cover everything. Up, but first I'm going to get those sticks out so I can get to work and get in with my e6000 again. Put the e6000 on the Ginga parts and place the frame. This actually looks like a box. You are like a tray of ice. Put this in the middle of the table and use it as a centerpiece. There's another idea for you, but I went in and glued this butterfly on the side and took my jet black paint again.

I noticed that there were some small ones. A piece of the Ginga pieces is shown so I went and painted it so this part is optional it depends if you want to have this on your desk or hang it but for me I want this outside. I'm going to hang up my

ribbon

s. so I'm going to use e6000, the hooks on the frame itself there's a hook back there, but I don't trust that cardboard. I feel like everything is going to fall and I have so many hooks from those other frames. Then why not? And I want to remind you that, oh, my body is a little wobbly right now because I have the butterfly in front, but when you do this step, it shouldn't wobble at all, you should just lie down. on the table, but I have that butterfly in front of the frame, that's why it wobbles when I do this step, but anyway just watch 6000 your hooks and let them dry, which by the way you can find those butterflies at Dollar Tree. too, but I'm going to turn my tray over and I'm going to come in with this stick from Walmart that measures 7/16 by 36 inches.

If you can't find that one, you can also make the half inch by 36 inch one and I think this is only 67 cents, it's definitely less than a

dollar

and you only need one, so now I'm going to take my cane, I'm going to run it through the tray where it will be later, I'll take a marker and then mark. where I need to cut, you just want to make sure that your stick is above the Ginga piece, not too short and not too long because I also don't want my stick to be seen from the sides of the frame, so yeah, so I'm going to go in with my marker, push it again, take the brown piece because I'm using a Braille marker, so focus on a brown piece, there it goes, take it to the other side and then mark again with your marker and that's where I'm going to cut and that's it what they look like I'm going to go in with my jet black again and paint the three sticks black.

You can make it any color you want and there you are, I'm just going to show you how. I use it, I'm just going to run my stick through and run my

ribbon

over and it should be over the Ginga pieces and again when you do this make sure the ribbons aren't touching the frame so they can spin nicely. and smoothly and make sure there is room for all three so this works best on them, the little ribbons like these sold at Dollar Tree and other places, but I know there are bigger rules, they may not work for that, but at least we removed the little tapes so it looks like a little tape closet and I think you could fit quite a few in there and you don't necessarily have to take it out every time and you can see the tapes that you have. on hand so they don't accidentally go out and buy the same ones.

I like the idea. I like it, it's also a cute way to

display

your ribbons and, yes, it's super easy to make and definitely affordable, so let me know what you think. and here it is above my craft area. I'm slowly cleaning it up and organizing it and there was my paint

organizer

, but let me know what you think and be sure to give this video a big thumbs up, share it, and subscribe. and press the bell button to be notified every time I upload a video thanks for watching until next time goodbye